Product Overview
This HWORKS Motorcycle Rear Tire Hugger Fender is designed to protect your motorcycle from rain, mud, and road debris, ensuring a cleaner ride and extending the lifespan of your motorcycle's components. It serves as a direct replacement for old or damaged fenders and is crafted for durability and aesthetic appeal.
The fender effectively prevents sand and gravel from splashing onto the motorcycle's paintwork, keeping both the rider and the motorcycle clean. It also safeguards important parts of the motorcycle from dirt and damage caused by road debris and stone chips.
Figure 1: HWORKS Motorcycle Rear Tire Hugger Fender (Black)
Compatibility
This rear tire hugger fender is compatible with the following motorcycle models:
- Click 125/150
- Game
- Changer
Key Features
- Material: Constructed from durable ABS plastic, ensuring long-lasting performance.
- Protection: Effectively prevents mud and water splashes on the motorcycle body and protects critical components from road debris.
- Design: Available in black or carbon fiber finish, enhancing the motorcycle's appearance.
- Direct Replacement: Designed for easy removal and installation as a direct replacement for existing fenders.
Figure 2: Available finishes: Black and Carbon Fiber.
Setup and Installation
The fender is designed for straightforward installation. However, please note that screws and bolts required for installation are not included in the package. You will need to use existing hardware or acquire appropriate fasteners separately.
- Preparation: Ensure your motorcycle is stable and turned off. Identify the mounting points for the rear fender.
- Removal of Old Fender (if applicable): Carefully remove any existing rear fender by unscrewing its fasteners. Retain all hardware if it is to be reused.
- Positioning: Align the new HWORKS fender with the mounting points on your motorcycle's rear wheel assembly.
- Securing: Use appropriate screws and bolts (not supplied) to securely fasten the fender to the motorcycle. Ensure all connections are tight to prevent vibration and detachment during operation.
- Final Check: After installation, gently test the fender's stability and ensure it does not interfere with tire rotation or suspension movement.
Figure 3: Example of the black fender installed on a motorcycle.
Figure 4: Comparison of black and carbon fiber fenders installed on a motorcycle.
Operating Instructions
Once installed, the HWORKS Rear Tire Hugger Fender operates passively by providing a physical barrier between the rear tire and the motorcycle's frame and rider. Its primary function is to:
- Prevent Splashes: Minimize the splashing of water, mud, and dirt from the rear tire onto the motorcycle's bodywork, engine components, and the rider's back.
- Protect Components: Shield sensitive parts of the motorcycle, such as the suspension, chain, and electrical wiring, from abrasive road debris and corrosive elements.
- Maintain Cleanliness: Contribute to keeping the motorcycle cleaner, reducing the frequency and intensity of cleaning required after rides in adverse conditions.
Maintenance
To ensure the longevity and effectiveness of your HWORKS Rear Tire Hugger Fender, follow these simple maintenance guidelines:
- Regular Cleaning: Clean the fender regularly with mild soap and water to remove accumulated dirt, mud, and road grime. Avoid abrasive cleaners or solvents that could damage the plastic finish.
- Inspection: Periodically inspect the fender for any signs of damage, cracks, or loose mounting points.
- Fastener Check: Ensure all screws and bolts securing the fender remain tight. Re-tighten if necessary to prevent rattling or detachment.
- Avoid Impact: While durable, avoid subjecting the fender to severe impacts that could cause structural damage.
Troubleshooting
This product is a passive component and typically requires minimal troubleshooting. Most issues are related to installation or physical damage.
- Fender is Loose/Rattling:
- Check all mounting screws and bolts. Ensure they are properly tightened.
- Verify that the correct size and type of fasteners were used during installation.
- Excessive Mud/Water Splashing (after installation):
- Confirm the fender is correctly positioned and fully covers the necessary area of the tire.
- Ensure the fender is not bent or damaged, which could compromise its protective coverage.
- Fender Interference with Tire/Suspension:
- Immediately cease operation if interference is detected.
- Re-check installation to ensure the fender is mounted correctly and not obstructing any moving parts.
- Verify compatibility with your specific motorcycle model.
If issues persist, consult a professional motorcycle mechanic.
Technical Specifications
| Attribute | Detail |
|---|---|
| Brand | HWORKS |
| Model Number | TSlin |
| Material | ABS Plastic, Carbon Fiber (variant) |
| Color | Black (this variant), Carbon Fiber (other variant) |
| Placement on Motorcycle | Rear |
| Dimensions (Approximate) | 43.5 cm (17.13 inches) x 13.5 cm (5.31 inches) |
| Item Weight | 500 grams |
Figure 5: Approximate dimensions of the fender.
Warranty and Support
No specific warranty information is provided with this product. For any support inquiries or further assistance, please refer to the retailer or the manufacturer, HWORKS, through their official contact channels.
Please retain your purchase receipt as proof of purchase for any potential claims or inquiries.