1. Introduction
Thank you for purchasing the BANDAI Mobile Suit Gundam MS Mechanical Bust 05 Gundam Exia (Trans Am Color). This product is the 5th release in the mechanical bust series, featuring detailed modeling of the Mobile Suit Gundam Exia in its distinctive Trans Am color scheme. This set includes three different types: the Gundam Exia Trans Am Color Exterior (Color Version), the Gundam Exia Trans Am Color Exterior (Mechanical Clear Version), and the Interior Mecha (with Luminous Unit). This manual provides essential instructions for assembly, display, and care to ensure optimal enjoyment of your collectible.
2. Package Contents
Before beginning assembly, please verify that all components are present and undamaged. The box contains 6 pieces, which include a ratio of the following three types:
- Gundam Exia Trans Am Color Exterior (Color Version)
- Gundam Exia Trans Am Color Exterior (Mechanical Clear Version)
- Interior Mecha (Luminous Unit Included)
If any parts are missing or damaged, please contact your retailer or BANDAI customer support.
Figure 1: Assembled Gundam Exia Mechanical Bust. This image displays the completed model, highlighting its detailed exterior and the Trans Am color scheme. The translucent parts of the mechanical clear version are visible, showcasing the internal structure.
3. Setup and Assembly
The Gundam Exia Mechanical Bust requires careful assembly. Please follow these steps:
- Unpack Components: Carefully remove all parts from their packaging. Lay them out on a clean, flat surface to prevent loss or damage.
- Identify Parts: Refer to the included diagram (if any, or general understanding of bust components) to identify the Exterior (Color Version), Exterior (Mechanical Clear Version), and Interior Mecha.
- Assemble Interior Mecha: If the luminous unit for the Interior Mecha requires battery insertion, do so now. Ensure correct polarity. (Note: Batteries are typically not included and may need to be purchased separately.)
- Combine Interior and Exterior: Carefully align the Interior Mecha with your chosen Exterior (Color or Mechanical Clear). Gently press the parts together until they securely snap into place. Avoid excessive force to prevent breakage.
- Final Check: Ensure all parts are firmly connected and the bust is stable.
Caution: Small parts may be present. Keep out of reach of small children.
4. Display and Operation
Once assembled, your Gundam Exia Mechanical Bust is ready for display.
- Placement: Choose a stable, flat surface away from direct sunlight, extreme temperatures, and high humidity to prevent material degradation or color fading.
- Luminous Unit (if applicable): If you have assembled the Interior Mecha with the luminous unit, activate it according to its specific instructions (e.g., switch on/off). The luminous feature enhances the mechanical clear version's appearance.
- Handling: Handle the bust by its base whenever possible to avoid damaging delicate parts or paintwork.
5. Maintenance and Care
Proper care will preserve the appearance and longevity of your collectible.
- Cleaning: Dust the bust regularly with a soft, dry brush or a microfiber cloth. For stubborn dirt, lightly dampen the cloth with water (do not use harsh chemicals or abrasive cleaners).
- Avoid Impact: Protect the bust from accidental drops or impacts, which can cause breakage or paint chips.
- Storage: If storing the bust, keep it in its original packaging or a protective container in a cool, dry place.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Parts do not fit together | Incorrect alignment; excess plastic/burrs; manufacturing defect. | Ensure correct orientation. Gently remove any burrs with a hobby knife. If parts are clearly misformed, contact support. |
| Luminous unit not working | Batteries inserted incorrectly; dead batteries; unit switch off. | Check battery polarity. Replace batteries. Ensure the power switch is in the "ON" position. |
| Bust is unstable | Parts not fully connected; uneven display surface. | Press parts firmly until they click into place. Move to a flat, stable surface. |
7. Specifications
- Product Name: Mobile Suit Gundam MS Mechanical Bust 05 Gundam Exia (Trans Am Color)
- Brand: BANDAI
- Model Number: Not explicitly provided, refer to ASIN B0CHQ5RR39
- Product Dimensions: 3.94 x 3.94 x 3.94 inches (approx. 10 x 10 x 10 cm)
- Item Weight: 15.1 ounces (approx. 428 grams)
- Material: Coloring figure (typically PVC/ABS)
- Contents: 1 box containing 6 pieces (ratio of 3 types)
- Manufacturer: BANDAI
8. Warranty and Support
BANDAI products are manufactured with high-quality standards. While specific warranty details are not provided in this manual, please retain your proof of purchase. For any manufacturing defects or inquiries regarding your product, please contact the retailer where you purchased the item or visit the official BANDAI website for customer support information.
BANDAI Official Website: www.bandai.com
