1. Introduction
Thank you for choosing the AKORD 2-Door Wardrobe. This manual provides essential information for the safe assembly, proper use, and maintenance of your new furniture. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
The AKORD 2-Door Wardrobe is a spacious storage solution designed for bedrooms, featuring a mirror, two drawers, and multiple shelves. Its dimensions are 90 cm wide, 180 cm high, and 51 cm deep. The design includes a left section with shelves and a right section with a clothes rail, optimizing space for various items.
Figure 1: AKORD 2-Door Wardrobe in a bedroom setting.
2. Safety Information
WARNING: Please read the assembly instructions carefully to ensure safe installation and prevent injury or damage to the product.
- Always assemble the wardrobe on a soft, clean surface to prevent scratches.
- Ensure all fittings are securely tightened before use.
- Do not overload shelves or drawers.
- For stability, it is recommended to secure the wardrobe to a wall using appropriate wall anchors (not always included, check package contents).
- Keep small parts out of reach of children during assembly.
3. Package Contents
Before assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
Included Components: All necessary components for assembly are included. This typically comprises:
- Laminated panels (sides, top, bottom, shelves, drawer fronts)
- Back panel
- Mirror door(s)
- Drawer components (sides, back, bottom)
- GTV roller guides for drawers
- Clothes rail
- Hinges for doors
- Assembly hardware (screws, dowels, cam locks, etc.)
- Assembly instructions
Figure 2: Wardrobe dimensions and internal layout diagram.
4. Setup and Assembly
The AKORD 2-Door Wardrobe is designed for self-assembly. Follow the included graphical instructions step-by-step.
4.1 Tools Required (Not Included)
- Phillips head screwdriver
- Hammer (for dowels)
- Measuring tape
- Pencil
- Spirit level
4.2 Assembly Steps (General Overview)
- Prepare the Area: Clear a spacious, clean, and soft area for assembly to prevent damage to components.
- Identify Parts: Lay out all panels and hardware, matching them with the parts list in the separate assembly guide.
- Assemble the Base: Connect the bottom panel to the side panels according to the instructions.
- Install Drawer Guides: Attach the GTV roller guides to the side panels for the drawers.
- Assemble Drawers: Construct the two drawers, ensuring the anti-ejection locks on the roller guides are correctly aligned.
- Install Shelves and Clothes Rail: Insert the shelves into the designated slots and secure the clothes rail.
- Attach Back Panel: Secure the back panel to the main frame.
- Mount Doors: Attach the mirror doors using the provided hinges. Adjust as necessary for proper alignment.
- Final Placement: Carefully move the assembled wardrobe to its final position.
- Secure to Wall (Recommended): For enhanced stability and safety, especially in households with children, secure the wardrobe to the wall using appropriate wall-mounting hardware (not always included).
Figure 3: Interior organization with shelves, clothes rail, and drawers.
5. Operating and Usage
Your AKORD wardrobe is designed for practical and efficient storage.
- Doors: Open and close the doors gently. The mirror door provides a full-length reflection.
- Drawers: The two drawers are equipped with GTV roller guides for smooth operation and an anti-ejection lock to prevent them from being pulled out completely by accident.
- Shelves: Utilize the four shelves on the left side for folded clothing, accessories, or storage boxes.
- Clothes Rail: The right side features a rail for hanging garments, keeping them wrinkle-free.
Figure 4: Detail of the GTV roller drawer mechanism.
6. Maintenance
Proper care will ensure the longevity and appearance of your wardrobe.
- Cleaning: Wipe surfaces with a dry, soft cloth. Avoid abrasive cleaners or harsh chemicals that can damage the laminated finish.
- Spills: Immediately wipe any spills with a dry cloth to prevent moisture absorption.
- Mirror Care: Clean the mirror with a standard glass cleaner and a soft, lint-free cloth.
- Hardware: Periodically check all screws and fittings to ensure they remain tight. Retighten if necessary.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading or discoloration.
Figure 5: Detail of the wardrobe's durable laminated finish and ABS edge banding.
7. Troubleshooting
If you encounter any issues with your wardrobe, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Doors do not align properly. | Hinges are not adjusted correctly or the wardrobe is not level. | Adjust the door hinges using a screwdriver. Ensure the wardrobe is on a level surface; use shims if necessary. |
| Drawers stick or do not slide smoothly. | Drawer guides are misaligned or dirty. | Check that the drawer guides are correctly installed and free of debris. Apply a silicone-based lubricant if needed. |
| Wardrobe feels wobbly. | Fittings are loose or the wardrobe is not secured to the wall. | Retighten all assembly screws. Ensure the wardrobe is secured to the wall using appropriate anti-tip hardware. |
| Missing parts during assembly. | Packaging error. | Refer to the package contents list and contact AKORD customer support with the specific part number. |
8. Specifications
| Brand | AKORD |
| Model Number | SP0PSYSBIASZALUST |
| Color | White & Graphite Grey |
| Material | Engineered Wood, Laminated Panel, ABS Veneer |
| Product Dimensions (D x W x H) | 51 cm x 90 cm x 180 cm |
| Number of Doors | 2 |
| Number of Drawers | 2 |
| Number of Shelves | 4 |
| Special Features | Mirror door, ABS veneered edges, GTV roller drawers with anti-ejection mechanism |
| Assembly Required | Yes |
| Country of Origin | Poland |
9. Warranty and Support
AKORD products are manufactured with quality and durability in mind.
9.1 Warranty Information
This product is covered by standard legal guarantees. For specific warranty details, please refer to the terms and conditions provided at the point of purchase or contact your retailer.
Return Policy: The product is eligible for returns within 30 days of purchase, subject to the retailer's return policy.
9.2 Customer Support
For any questions, missing parts, or assistance with assembly, please contact AKORD customer support.
- Manufacturer: AKORD
- Seller: Furniture-Akord
- Online Support: Visit the AKORD Brand Store for more information and contact options.