AIRBOT Aura VC801 Cordless Stick Vacuum Cleaner User Manual

1. Important Safety Instructions

Please read all instructions carefully before using this appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• This appliance is for household use only. Do not use outdoors or on wet surfaces.
• Do not allow children to operate the vacuum cleaner. Close supervision is necessary when used near children.
• Do not pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use without the dust cup and/or filters in place.
• Turn off the appliance before making any adjustments, changing accessories, or storing the vacuum.
• Use only as described in this manual. Use only manufacturer’s recommended attachments.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Exercise extra care when cleaning on stairs.

2. Product Overview

The AIRBOT Aura VC801 is a lightweight, cordless stick vacuum cleaner designed for efficient cleaning of various surfaces, including carpets and hard floors. It features a powerful motor, dual suction modes, and a flexible design for enhanced maneuverability.

Figure 2.1: The AIRBOT Aura VC801 effectively cleans various types of debris.

3. Setup and Assembly

3.1 Unboxing and Component Identification

Carefully remove all components from the packaging. Ensure all parts are present before assembly.

3.2 Assembly Steps

1. Attach the Extension Rod: Insert the extension rod into the main motor unit until it clicks securely into place.
2. Connect the Floor Brush: Attach the motorized floor brush to the other end of the extension rod, ensuring a firm connection.
3. Install Accessories: For handheld use, attach desired accessories (e.g., crevice nozzle, 2-in-1 brush) directly to the main motor unit.

Figure 3.2: Various accessories included with the vacuum cleaner.

3.3 Charging the Battery

Before first use, fully charge the vacuum cleaner. The magnetic charging port allows for effortless attachment.

• Connect the charger to the magnetic charging port on the main motor unit.
• Plug the charger into a power outlet.
• The RGB halo display will indicate charging status. A full charge takes approximately 4 hours.

Figure 3.3: The RGB Halo Display indicates charging status and operating modes.

4. Operating Instructions

4.1 Powering On/Off and Suction Modes

• Press the power button to turn the vacuum on.
• The vacuum defaults to Standard mode (12 kPa suction, up to 40 minutes runtime).
• Press the mode button to switch to Max mode (20 kPa suction, up to 20 minutes runtime) for deeper cleaning.
• The RGB halo display will change colors to indicate the current speed level.
• Press the power button again to turn the vacuum off.

Figure 4.1: Overview of the vacuum's performance features.

4.2 Using the Motorized Floor Brush

The motorized floor brush is suitable for both hard floors and carpets. It features an LED light to illuminate dust and debris in dark areas.

Figure 4.2: The motorized floor brush with LED light and other attachments.

4.3 Utilizing the Foldable Rod

The flexible 180° swivel sideways and 90° up and down foldable rod allows for easy cleaning under furniture and in hard-to-reach areas without bending over.

Figure 4.3: The foldable rod simplifies cleaning under low furniture.

4.4 Using Specialized Attachments

• Crevice Nozzle: Ideal for narrow gaps, corners, and edges.
• 2-in-1 Brush: Use the brush for delicate surfaces like keyboards or upholstery, and the nozzle for general dusting.

5. Maintenance

5.1 Emptying the Dustbin

To maintain optimal suction, empty the dustbin regularly, especially when it reaches the MAX fill line.

1. Ensure the vacuum is turned off.
2. Press the dustbin release button to detach the dust cup from the main unit.
3. Hold the dust cup over a trash bin and press the bottom release latch to open the dustbin and empty its contents.
4. Close the dustbin lid and reattach the dust cup to the main unit until it clicks.

Figure 5.1: One-touch dustbin emptying for convenience.

5.2 Cleaning the Filters

The 5-stage filtration system includes a metal filter, cylinder filtration, HEPA filtration, and sponge filtration. Regular cleaning is essential for performance.

1. Twist and pull to remove the filter assembly from the dust cup.
2. Separate the HEPA filter and sponge filter from the metal filter.
3. Tap off loose dirt from all filters. Rinse the filters under cold water until the water runs clear.
4. Allow filters to air dry completely for at least 24 hours before reassembling and placing back into the vacuum. Do not use a dryer or other heating device.

Figure 5.2: Washable filter and brush roll for easy maintenance.

5.3 Cleaning the Brush Roll

Periodically check the brush roll for tangled hair or debris and clean as needed.

1. Turn off the vacuum and detach the floor brush.
2. Locate the brush roll release tab on the side of the floor brush.
3. Remove the brush roll and cut away any tangled hair or debris using scissors.
4. Reinsert the brush roll and secure the release tab.

6. Troubleshooting

If you encounter any issues with your AIRBOT Aura VC801, please refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact customer service.

7. Specifications

8. Warranty and Support

Norvia (AIRBOT) offers a 12-month warranty and 7*24hrs customer service for all our customers. For any inquiries, assistance, or warranty claims, please feel free to contact us through the retailer or the official brand website.

• Warranty Period: 12 months from the date of purchase.
• Customer Service: Available 7 days a week, 24 hours a day.

Please retain your proof of purchase for warranty validation.