Kircuit AC/DC Adapter

Kircuit 12V AC/DC Adapter User Manual

Compatible with WAVLINK ST341U, ST334U, WLAMUS-ST341U, AMZWL-ST334U-5, 336A, WL-ST334UA, WL-UG39DK7, UG39DK1 External Hard Drive Docking Stations

1. Introduction

This user manual provides essential information for the safe and effective use of your Kircuit 12V AC/DC Adapter. This high-quality power charger is designed to provide reliable power to compatible WAVLINK external hard drive docking stations, ensuring stable operation and protection against overcharge.

2. Safety Information

Read all instructions: Before using the adapter, read and understand all safety and operating instructions.
Indoor use only: This adapter is designed for indoor use. Do not expose it to rain, moisture, or extreme temperatures.
Proper voltage: Ensure the wall outlet voltage matches the input voltage range of the adapter (100V-240V AC).
Avoid damage: Do not use the adapter if the cord or plug is damaged. Do not attempt to open or modify the adapter.
Keep away from children: Store the adapter out of reach of children.
Unplug when not in use: Disconnect the adapter from the power outlet when not in use for extended periods.
Ventilation: Ensure adequate ventilation around the adapter during use to prevent overheating.

3. Product Overview

Kircuit 12V AC/DC Adapter with power cord — **Figure 3.1:** Front view of the Kircuit 12V AC/DC Adapter, showing the main unit with the Kircuit brand label, input/output specifications, and the attached power cord with a barrel plug connector.

Two Kircuit 12V AC/DC Adapters from different angles — **Figure 3.2:** Two Kircuit 12V AC/DC Adapters displayed, illustrating the compact design and the standard US plug type from multiple perspectives.

Kircuit 12V AC/DC Adapter with 6.5 ft cord length indicated — **Figure 3.3:** The Kircuit 12V AC/DC Adapter with its power cord, highlighting the cord length of 6.5 feet for convenient reach.

Kircuit 12V AC/DC Adapter plugged into a power strip on a desk — **Figure 3.4:** The Kircuit 12V AC/DC Adapter in a typical use scenario, plugged into a power strip on a desk, demonstrating its wall-mount design and compact form factor.

4. Setup Instructions

Verify Compatibility: Ensure your device (e.g., WAVLINK ST341U, ST334U, WLAMUS-ST341U, AMZWL-ST334U-5, 336A, WL-ST334UA, WL-UG39DK7, UG39DK1 External Hard Drive Docking Station) requires a 12V DC power supply with a barrel plug connector.
Connect to Device: Insert the barrel plug connector of the Kircuit AC/DC Adapter firmly into the power input port of your compatible device.
Connect to Power Outlet: Plug the AC prongs of the adapter into a standard 100V-240V AC wall outlet.
Power On Device: Once the adapter is connected to both the device and the power outlet, you can power on your device.

5. Operating Instructions

The Kircuit 12V AC/DC Adapter operates automatically once connected to a power source and a compatible device. It provides a stable 12V DC output, essential for the proper functioning of your external hard drive docking station. The built-in Dynamic IC, Charger IC, and Power fuse ensure rapid charging and protection against overcharge, safeguarding your connected devices.

No user intervention is required for its operation beyond proper connection. The adapter is designed for continuous use, but it is recommended to unplug it when the connected device is not in use for extended periods.

6. Maintenance

Cleaning: Disconnect the adapter from the power outlet and the device before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or aerosols.
Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly winding the power cord to prevent damage.
Inspection: Periodically inspect the adapter, power cord, and connector for any signs of damage, such as cuts, fraying, or bent pins. If damage is found, discontinue use and replace the adapter.

7. Troubleshooting

Problem	Possible Cause	Solution
Device not powering on.	Adapter not properly plugged in. Power outlet is not active. Device is incompatible. Adapter is faulty.	Ensure adapter is fully inserted into both the wall outlet and the device. Test the outlet with another device. Verify your device requires a 12V DC barrel plug adapter. Try a different compatible adapter if available.
Adapter feels hot.	Normal operation under load. Poor ventilation. Overload or short circuit.	A slight warmth is normal. Ensure adapter is in a well-ventilated area. Disconnect immediately if excessively hot or emitting smoke/smell. Contact support if issue persists.
Intermittent power to device.	Loose connection. Damaged cable/connector.	Check all connections are secure. Inspect the cable and connector for visible damage. Replace if damaged.

8. Specifications

Feature	Detail
Brand	Kircuit
Input Voltage	100-240V AC, 50/60Hz, 0.3A
Output Voltage	12V DC
Connector Type	Barrel Plug
Connectivity Technology	Powerline
Compatible Devices	WAVLINK ST341U, ST334U, WLAMUS-ST341U, AMZWL-ST334U-5, 336A, WL-ST334UA, WL-UG39DK7, UG39DK1 External Hard Drive Docking Station
Included Components	1 x AC Adapter
Special Feature	Built-in Dynamic IC, Charger IC & Power fuse for rapid charging and over charge protection.
Color	Black
Mounting Type	Wall Mount
Cord Length	Approximately 6.5 ft

9. Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact the retailer from whom you purchased this product. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.