1. Introduction
Thank you for choosing the Yaheetech Single Metal Bed Frame. This manual provides essential information for the safe assembly, operation, and maintenance of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Figure 1.1: Yaheetech Single Bed Frame in White. This image shows the assembled white metal single bed frame with a simple headboard and footboard, suitable for a modern bedroom setting.
2. Safety Information
Please observe the following safety precautions to prevent injury or damage to the product:
- Warning: Be cautious of sharp edges during assembly and handling.
- Weight Limit: Do not load more than 136 kg (300 lbs) onto the bed frame. Exceeding this limit may cause structural damage or injury.
- Ensure all bolts and fasteners are securely tightened before use and periodically check for looseness.
- Do not allow children to play on or under the bed frame without supervision.
- Use the bed frame only for its intended purpose.
- Keep small parts out of reach of children during assembly to prevent choking hazards.
3. Specifications
| Feature | Detail |
|---|---|
| Brand | Yaheetech |
| Model | YA-00116717 |
| Color | White |
| Overall Dimensions (L x W x H) | 207 cm x 96.2 cm x 88.5 cm (approx. 81.5" x 37.9" x 34.8") |
| Compatible Mattress Size | 90 cm x 200 cm (approx. 35.4" x 78.7") |
| Under-bed Clearance | 32 cm (approx. 12.6") |
| Maximum Load Capacity | 136 kg (300 lbs) |
| Material | Metal (Wrought Iron) |
| Special Features | Robust, Stable, High Headboard, Ample Under-bed Storage |
| Item Weight | 12 kg (approx. 26.5 lbs) |
Figure 3.1: Detailed dimensions of the Yaheetech Single Bed Frame. This technical drawing illustrates the bed frame's overall length (207 cm), width (96.2 cm), headboard height (88.5 cm), footboard height (60.5 cm), and the 32 cm under-bed clearance. It also confirms the maximum load capacity of 136 kg and compatibility with a 90 x 200 cm mattress.
4. Setup & Assembly
Assembly of the Yaheetech Single Metal Bed Frame is designed to be straightforward. Please follow these steps carefully. It is recommended to assemble with two people.
4.1. Before You Begin
- Unpack all components and lay them out on a clean, soft surface (e.g., a carpet or blanket) to prevent scratches.
- Verify that all parts and hardware listed in the packaging are present. If any parts are missing or damaged, contact customer support.
- Keep children and pets away from the assembly area.
4.2. Assembly Steps
- Attach Headboard and Footboard Legs: Identify the headboard and footboard sections. Attach the support legs to these sections using the provided bolts and nuts. Ensure they are securely fastened but do not overtighten yet.
- Connect Side Rails: Connect the side rails to the headboard and footboard assemblies. Align the holes and insert the bolts, securing them with nuts.
Figure 4.1: Illustration of simple assembly. This image demonstrates how to connect the metal pipes by aligning them with the notch and pressing firmly to secure the connection.
- Install Center Support Legs (if applicable): If your model includes center support legs, attach them to the central support beam or directly to the bed frame as indicated in the specific instructions provided with your product.
- Place Slatted Base: Carefully place the metal slatted base onto the frame. Ensure the slats are properly seated in their designated slots or supports. The built-in slats are designed to prevent mattress sliding.
Figure 4.2: Built-in slats prevent mattress sliding. This illustration shows how the integrated slats securely hold the mattress, preventing unwanted movement.
- Tighten All Fasteners: Once all components are in place, systematically tighten all bolts and nuts using the provided tool. Do not overtighten, but ensure all connections are firm and stable.
- Final Check: Gently shake the assembled bed frame to ensure it is stable and all connections are secure.
Figure 4.3: Close-up of sturdy metal connections. This image provides a detailed view of the robust metal joints and fasteners, illustrating the secure construction of the bed frame.
5. Operating Instructions
5.1. Mattress Placement
Once the bed frame is fully assembled, carefully place your 90 cm x 200 cm mattress onto the slatted base. The design of the frame, including the high headboard, accommodates various mattress thicknesses.
Figure 5.1: High headboard design. This image highlights the tall metal headboard, which provides comfortable back support for reading or watching TV and is suitable for different mattress heights.
5.2. Under-bed Storage
The bed frame offers a generous 32 cm (approx. 12.6 inches) of clearance between the floor and the bed base. This space can be utilized for storing various items such as suitcases, storage boxes for clothes, or shoes, helping to keep your room tidy.
Figure 5.2: Ample under-bed storage. This image clearly shows the 32 cm height available under the bed frame, demonstrating its utility for storing various items in baskets or containers.
6. Maintenance
To ensure the longevity and appearance of your Yaheetech bed frame, follow these simple maintenance guidelines:
- Cleaning: Wipe the metal frame with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as they may damage the finish.
- Rust Resistance: The treated coating on the metal frame is designed to be rust-resistant, making it easy to clean and maintain.
- Regular Checks: Periodically check all bolts and connections to ensure they remain tight. Retighten if necessary to maintain stability.
- Under-bed Cleaning: The 32 cm height from the floor allows for easy cleaning underneath the bed, including access for robot vacuum cleaners.
7. Troubleshooting
If you encounter any issues with your Yaheetech Single Metal Bed Frame, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed frame is wobbly or unstable. | Loose bolts or incorrect assembly. | Ensure all bolts and nuts are securely tightened. Review assembly steps to confirm correct installation of all parts. |
| Squeaking noises. | Loose connections or friction between metal parts. | Tighten all bolts. If squeaking persists, apply a small amount of lubricant (e.g., silicone spray) to connection points. |
| Mattress slides on the frame. | Incorrect mattress size or issue with slats. | Ensure your mattress is the correct size (90 x 200 cm). Verify that the built-in slats are properly installed and not damaged. |
| Missing parts during unboxing. | Packaging error or transit damage. | Contact Yaheetech customer support immediately with your purchase details. |
8. Warranty & Support
Yaheetech products are manufactured to high-quality standards. For information regarding warranty coverage, returns, or technical support, please refer to the specific terms and conditions provided at the time of purchase or visit the official Yaheetech website.
For direct assistance, you may contact Yaheetech customer service through the retailer where you purchased the product or via their official contact channels. Please have your model number (YA-00116717) and purchase date ready.
Visit the Yaheetech Store on Amazon for more products and information.
