Seyaom M2004 Micro Building Blocks Set: Suzhou Garden with LED Light Instruction Manual

Introduction

This manual provides detailed instructions for assembling your Seyaom M2004 Micro Building Blocks Set, featuring the intricate Chinese Architecture of Suzhou Garden. This set includes 3888 micro-sized pieces and an LED lighting kit, designed for individuals aged 14 and above. Due to the small size and large number of components, patience and careful attention to detail are essential for a successful build.

Safety Information

• Small Parts Warning: This product contains small parts and is not suitable for children under 3 years old due to choking hazards.
• Keep all components away from pets.
• Handle the LED light components with care.

Package Contents

Please verify that all components are present before beginning assembly. The package should contain:

• 3888 Micro Building Blocks (various shapes and colors)
• Instruction Manual (this document)
• LED Light Set (requires 3 Lithium Metal batteries, included)
• Assembly Tools (may include mallet, tweezers, and a brick separator)

If any parts are missing, please refer to the "Warranty and Support" section for assistance.

Setup and Assembly

The assembly process for the Seyaom M2004 set requires careful attention due to the micro-sized bricks. Follow the numbered steps in the included pictorial instructions.

1. Preparation

• Organize Components: Before starting, sort the building blocks by color and shape. This will significantly aid in the assembly process and prevent loss of small pieces.
• Clear Workspace: Ensure you have a clean, well-lit, and stable surface for assembly.
• Review Instructions: Familiarize yourself with the overall structure and the initial steps by reviewing the instruction booklet.

2. Base Construction

Begin by assembling the base plate and the foundational layers of the Suzhou Garden. Pay close attention to the placement of the green "grass" and blue "water" sections.

Figure 1: Overview of the fully assembled Seyaom Suzhou Garden.

Figure 2: Demonstrates the micro-sized nature of the blocks and the assembly process.

3. Building Structures and Landscaping

• Proceed with constructing the various architectural elements, including pagodas, bridges, and pavilions, as indicated in the step-by-step diagrams.
• Integrate the landscaping elements such as trees, cherry blossoms, and other flora as you build.
• Use the provided tools (mallet for tight fits, tweezers for small pieces, brick separator for corrections) as needed.

Figure 3: Detailed view of a pagoda and bridge section, highlighting intricate micro-block assembly.

Figure 4: Illustration of how roof sections are assembled and attached to the main structures.

4. LED Light Installation

• The LED light set is designed to be integrated during or after the main construction. Follow the specific instructions provided with the LED kit for proper placement and wiring.
• Ensure batteries are correctly inserted into the battery pack.

Figure 5: The completed Suzhou Garden model with the integrated LED lighting system activated.

Operating the LED Lights

Once the LED light set is installed and batteries are in place, locate the power switch on the battery pack. Toggle the switch to turn the lights on or off. The lights are designed to enhance the display of your completed model.

Maintenance

• Cleaning: To clean the assembled model, gently dust with a soft brush or a dry cloth. Avoid using water or chemical cleaners, as these may damage the blocks or electrical components.
• Storage: Store the model in a stable location away from direct sunlight and extreme temperatures to prevent discoloration or warping of the plastic.
• Battery Replacement: When the LED lights dim, replace the 3 Lithium Metal batteries in the battery pack. Ensure correct polarity.

Troubleshooting

Specifications

• Model Number: M2004
• Product Dimensions (Assembled): Approximately 16.14 x 7.87 x 5.7 inches (41 x 20 x 14.5 cm)
• Item Weight: 3.21 pounds (1.46 kg)
• Number of Pieces: 3888 Micro Blocks
• Recommended Age: 14 years and up
• Power Source for LED: 3 Lithium Metal batteries (included)
• Material: High-quality ABS plastic
• Manufacturer: SHANTOU YIGAO TECHNOLOGY CO.,LTD

Warranty and Support

For any issues regarding missing parts, defective components, or general inquiries, please contact Seyaom customer support. Refer to the contact information provided on the product packaging or the official Seyaom website. Please have your model number (M2004) and purchase details ready when contacting support.

Seyaom is committed to providing high-quality products and customer satisfaction. We will assist you with any concerns to ensure a positive building experience.