Krysenix PG1 Gaming Headset User Manual

Introduction

Welcome to the user manual for your Krysenix PG1 Gaming Headset. This guide provides essential information for setting up, operating, and maintaining your new headset to ensure optimal performance and an immersive audio experience across various gaming platforms.

Package Contents

Please verify that all items listed below are included in your package:

• Gaming Headset
• 1 to 2 3.5 mm Audio Jack Splitter Cable
• 2.2 m Extension Cable
• User Manual

Product Overview

The Krysenix PG1 Gaming Headset is designed for high-quality audio and comfortable use during extended gaming sessions. Key features include:

• Stereo Surround Sound: Equipped with 50mm high-density dual neodymium audio drivers that deliver clear stereo sound and responsive audio.
• Adjustable Noise-Canceling Microphone: Features a sensitive, adjustable microphone with noise-canceling technology for clear communication. The microphone can be adjusted up to 120°.
• Comfortable Ergonomic Design: Lightweight headband and ear cushions made from skin-friendly, breathable foam and leather, providing up to 85% external noise isolation.
• Dynamic Soft RGB Lighting: LED lights on the earcups change in sync with your game when plugged into a USB port.
• One-Button Volume Control: Integrated rotating volume control and a one-touch microphone mute function on a robust, tangle-resistant 89-inch braided cable.

Figure 1: Krysenix PG1 Gaming Headset with RGB lighting.

Setup Instructions

Follow these steps to connect your headset to your preferred gaming device:

1. Identify Connections: The headset features a 3.5mm audio jack for sound and microphone, and a USB connector for RGB lighting.
2. Connecting to PC/Laptop/Mac:
   • If your computer has separate audio and microphone jacks, use the included 1 to 2 3.5mm Audio Jack Splitter Cable. Plug the headset's 3.5mm jack into the splitter, then plug the splitter's audio and microphone plugs into the corresponding ports on your computer.
   • Plug the USB connector into an available USB port on your computer to activate the RGB lighting.
3. Connecting to PS4/PS5/Switch/Mobile:
   • Plug the headset's 3.5mm jack directly into the controller (PS4/PS5) or the console's audio port (Switch/Mobile).
   • For RGB lighting, plug the USB connector into an available USB port on the console or a USB power adapter.
4. Connecting to Xbox One/Xbox Series X/S:
   • An additional adapter (not included) is required for Xbox One controllers that do not have a 3.5mm jack. For controllers with a 3.5mm jack, plug the headset's 3.5mm jack directly into the controller.
   • Plug the USB connector into an available USB port on the console or a USB power adapter for RGB lighting.

Figure 2: Multi-platform connection diagram for the Krysenix PG1 headset.

Operating Instructions

• Volume Control: Use the rotating volume wheel located on the in-line control unit to adjust the audio output level.
• Microphone Mute: The in-line control unit also features a one-touch button to mute or unmute the microphone. Slide the switch to the appropriate position.
• Microphone Adjustment: The flexible microphone can be adjusted up to 120 degrees to position it optimally for clear voice capture or to move it out of the way when not in use.
• RGB Lighting: The dynamic RGB lighting on the earcups will activate automatically when the USB connector is plugged into a powered USB port.

Figure 3: In-line control unit with volume wheel and microphone mute switch.

Maintenance

• Keep the headset clean by wiping it with a soft, dry cloth.
• Avoid exposing the headset to extreme temperatures, humidity, or direct sunlight.
• Do not attempt to disassemble or repair the headset yourself, as this may void the warranty.
• Store the headset in a safe place to prevent damage to the cables or earcups.

Troubleshooting

• No Sound:
  • Ensure the 3.5mm audio jack is fully inserted into the device.
  • Check the volume wheel on the in-line control and your device's volume settings.
  • Verify that the correct audio output device is selected in your system settings.
• Microphone Not Working:
  • Ensure the microphone mute switch on the in-line control is in the "unmute" position.
  • Check your device's microphone input settings and ensure the headset is selected as the input device.
  • If using a splitter, ensure it is correctly connected to both audio and microphone ports.
• RGB Lights Not Working:
  • Ensure the USB connector is securely plugged into a powered USB port. The RGB lighting requires USB power and does not function solely with the 3.5mm audio jack.

Specifications

Warranty and Support

Krysenix offers a 12-month customer service warranty for the PG1 Gaming Headset. Each headset undergoes strict quality testing before shipping. If you encounter any issues with your headset within 12 months of purchase, please contact Krysenix customer service for a satisfying solution.

For further assistance, please refer to the contact information provided with your purchase or visit the official Krysenix Store.

Official Product Videos