maxeylead BRL136
User Manual
maxeylead Replacement Head for Philips Beauty Lady Shaver Satinshave
Product Overview
This manual provides instructions for the maxeylead Replacement Shaver Foil Head, designed for compatibility with Philips Beauty Lady Shaver Series BRL136 and BRL146. These replacement heads are engineered to provide a close and comfortable shaving experience for legs and body, suitable for both wet and dry use.
Image: The maxeylead replacement head shown attached to a Philips Beauty Lady Shaver, highlighting its integrated design.
Image: A pair of maxeylead replacement shaver foil heads, displaying their front and back components.
Key Features:
- Compatibility: Designed for Philips Beauty Lady Shaver Series BRL136 and BRL146.
- Floating Foil: Provides a closer, more even shave by gliding seamlessly along body contours.
- Pearl-tip Trimmers: Rounded tips in front of and behind the shaving foil help protect skin from irritation.
- Wet & Dry Use: Suitable for use in the shower or bath for maximum convenience, featuring an anti-slip grip.
- Ergonomic Design: Allows for comfortable shaving of legs, knees, ankles, underarms, and bikini area.
Image: A visual representation of the floating foil technology, showing how it adapts to body curves for consistent contact.
Image: A close-up diagram highlighting the pearl-tip trimmers, designed to prevent nicks and irritation during shaving.
Image: A person demonstrating the use of the shaver on their leg, indicating its suitability for various environments.
Safety Information
Warning:
Keep away from naked flame or direct heat sources.
Setup and Installation
The maxeylead replacement head is designed for easy installation on compatible Philips Beauty Lady Shavers.
- Preparation: Ensure your Philips Beauty Lady Shaver is turned off and unplugged (if applicable) before attempting to replace the head.
- Removing the Old Head: Gently press the release buttons or mechanism on your shaver to detach the existing shaving head. Refer to your original shaver's manual for specific instructions if needed.
- Attaching the New Head: Align the maxeylead replacement head with the shaver body. Press firmly until you hear a click, indicating it is securely locked into place. Ensure the head is flush with the shaver body and does not wobble.
- Verification: Lightly tug on the installed head to confirm it is firmly attached before use.
Operating Instructions
Once the replacement head is installed, operate your shaver as per its original instructions. The maxeylead replacement head maintains the shaver's wet and dry capabilities.
- Wet Shaving: For a more comfortable shave, use with water, foam, or gel. The anti-slip grip ensures secure handling even when wet.
- Dry Shaving: Can be used on dry skin for quick touch-ups.
- Shaving Technique: Glide the shaver gently over the skin, moving against the direction of hair growth. The floating foil will adapt to your body's contours.
- Sensitive Areas: Use extra care on sensitive areas. The pearl-tip trimmers are designed to minimize irritation.
Maintenance
Regular cleaning of the replacement head is crucial for optimal performance and hygiene.
- Daily Cleaning: After each use, rinse the shaving head under running water to remove hair clippings and residue.
- Thorough Cleaning: Periodically, detach the shaving head and clean it more thoroughly. You may use a small brush (often included with shavers) to remove stubborn hair or debris from the foil and trimmers.
- Drying: Allow the shaving head to air dry completely before reattaching it to the shaver or storing it. Do not wipe the foil with a towel as this can damage it.
- Replacement: Shaving heads wear down over time. Replace your maxeylead head when you notice a decrease in shaving performance, increased irritation, or visible damage to the foil or trimmers. The lifespan of a shaving head depends on usage frequency and hair type.
Troubleshooting
If you encounter issues with your maxeylead replacement head, consider the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Poor shaving performance / Not cutting hair effectively | Head is clogged with hair or debris; Head is worn out; Incorrect shaving angle. | Clean the head thoroughly; Replace the head if it's old or damaged; Ensure you are gliding the shaver against hair growth. |
| Skin irritation / Nicks or cuts | Head is worn or damaged; Applying too much pressure; Skin not prepared properly (e.g., dry shaving on sensitive skin). | Inspect the head for damage and replace if necessary; Use light pressure; Consider wet shaving with foam/gel for sensitive skin. |
| Head does not attach securely | Incorrect alignment; Debris in the attachment mechanism. | Ensure correct alignment with the shaver body; Clean the attachment area on both the head and shaver. |
Specifications
- Model Compatibility: Philips Beauty Lady Shaver Series BRL136, BRL146
- Product Dimensions: 2.17 x 1.57 x 0.75 inches
- Item Weight: 0.32 ounces
- Manufacturer: maxeylead
- UPC: 786194169081
- ASIN: B0CGRPNZ2T
Warranty and Support
For information regarding warranty coverage or product support, please refer to the original purchase documentation or contact maxeylead customer service. Contact details may be available on the product packaging or the retailer's website where the product was purchased.
Please note that this replacement head is a third-party accessory and its warranty may differ from the original shaver's warranty.