1. Product Overview
The isinlive TP01/TP02/TP03/AM11/BP01 HEPA Filter Replacement is designed to maintain optimal air quality in your home. This filter features a 3-in-1 filtration system to capture various airborne particles and odors, ensuring cleaner air.
Image 1: isinlive TP01/TP02 HEPA Filter Replacement shown with a compatible Dyson air purifier.
2. Compatibility
This filter replacement is compatible with the following Dyson Tower Purifier Pure Cool Link models:
- TP01
- TP02
- TP03
- AM11
- BP01
It replaces Dyson part numbers 968126-03, 305158-01, 305159-01, 308400-01, and 308401-01.
Important: This filter is NOT compatible with Dyson Pure Hot + Cool Link models HP01, HP02, HP03, DP01, DP02, DP03, TP7A, TP07, TP09, or TP10.
To ensure correct fit, please verify your air purifier's model number. The product size is approximately 7.4"L x 7.4"W x 7.3"Th.
Image 2: Visual guide for compatible Dyson air purifier models (BP01, TP01, TP02, TP03, AM11) and incompatible models (DP01/DP02/DP03, HP01/HP02/HP03, PH04, TP07/TP09/TP10).
Image 3: Guide on locating the model number on your Dyson air purifier, typically a 4-digit number near the barcode on the product label or rear of the machine.
3. Installation Guide
Follow these steps to replace your air purifier filter:
- Remove the top part of your Dyson air purifier.
- Carefully remove the outer mesh housing.
- Remove the old filter from the air purifier base.
- Place the new isinlive filter into the air purifier base.
- Reattach the outer mesh housing.
- Place the top part back onto the air purifier.
Ensure all components are securely in place before operating the device.
Video 1: This video demonstrates the process of replacing the TP01 filter in a Dyson air purifier, showing how to remove the old filter and install the new one.
Image 4: Visual guide illustrating the correct method for installing the filter by placing it into the housing and then into the air purifier groover, contrasting with an incorrect method.
4. Filter Indicator Reset
After replacing the filter, you must reset the filter indicator on your Dyson air purifier. This will clear the 'F' symbol from the screen.
For Models TP01, TP02, TP03, AM11:
- Press and hold the Standby on/off button on the remote control for 6 seconds.
For Model BP01:
- Press and hold the power button on the remote control for 5 seconds.
- The screen will count down from 5. Once you see the confirmation screen, your purifying fan is ready for use.
Image 5: Instructions for resetting the filter indicator on Dyson models TP01/TP02/TP03/AM11 and BP01 after filter replacement.
5. Filter Technology: 3-in-1 Filtration System
The isinlive replacement filter utilizes a comprehensive 3-stage filtration system to effectively purify the air:
- Fine Pre-Filter: Captures larger particles such as hair, lint, pet fur, fibers, and dust.
- HEPA Filter: Attaches to 99.97% of fine particles as small as 0.3 microns, including dust, pet dander, and pollen.
- Activated Carbon Filter: Effectively removes unwanted odors such as smoke, pet odors, cooking odors, and Volatile Organic Compounds (VOCs).
Image 6: Diagram illustrating the 3-stage filtration process, showing how the Pre-Filter, HEPA Filter, and Activated Carbon Filter work together to capture particles and odors.
Image 7: Illustration highlighting the increased activated carbon pellets for enhanced odor reduction, targeting cooking odors, wildfire smoke, VOCs, and pet odors.
Image 8: Close-up view of the pleated paper in the HEPA filter, designed for increased adsorption and efficient capture of airborne particles.
Image 9: Visual representation of powerful air purification, showing the filter's ability to capture 99.97% of airborne particles as small as 0.3 microns.
Image 10: Image depicting the filter's effectiveness for pet owners, with activated carbon pellets targeting pet odors, fur, and dander.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | isinlive |
| Compatible Models | Dyson Pure Cool Link TP01, TP02, TP03, AM11, BP01 |
| Replaces Part Numbers | 968126-03, 305158-01, 305159-01, 308400-01, 308401-01 |
| Filtration System | 3-in-1 (Fine Pre-Filter, HEPA Filter, Activated Carbon Filter) |
| HEPA Filtration Efficiency | 99.97% of particles as small as 0.3 microns |
| Product Dimensions | 7.4"L x 7.4"W x 7.3"Th |
| Item Weight | 1.28 pounds |
| Material Type | Paper (FSC-Certified) |
| MERV Rating | 13 |
| Included Components | 2 x TP01 TP02 Replacement Filters |
7. Maintenance
For optimal performance and air quality, it is recommended to replace the isinlive TP01/TP02 HEPA filter every 6-12 months. The exact replacement interval may vary depending on usage frequency and environmental conditions.
8. Troubleshooting
Filter Not Fitting:
Ensure you have selected the correct filter model for your Dyson air purifier. Refer to the compatibility section and check your device's model number. The filter dimensions are 7.4"L x 7.4"W x 7.3"Th.
Filter Indicator Not Resetting:
Follow the specific filter indicator reset instructions for your model (TP01/TP02/TP03/AM11 or BP01) precisely. Ensure you hold the correct button for the specified duration.
9. Warranty and Support
For any questions regarding the product, installation, or performance, please contact the manufacturer or seller directly through the platform where the purchase was made. Specific warranty details may be provided at the point of purchase or on the manufacturer's official website.