FurnitureR Ergonomic Armless Office Chair User Manual

Introduction

Thank you for choosing the FurnitureR Ergonomic Armless Office Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new chair. Please read these instructions carefully before use and retain them for future reference.

Image: The FurnitureR Ergonomic Armless Office Chair in a modern office setting, showcasing its design.

Safety Information

WARNING:

• Ensure not to exceed the weight limit of 120 kilograms (265 lbs). Exceeding this limit may cause damage to the chair or personal injury.
• Follow assembly instructions carefully to ensure the stability and safety of the chair. Improper assembly can lead to instability.
• Keep all small parts and packaging materials away from children to prevent choking hazards.
• Do not stand on the chair.
• Use the chair only on a stable, level surface.

Package Contents

Before beginning assembly, please verify that all components are present and undamaged. The package should include:

• Seat Cushion with Backrest
• Cross-Leg Base
• Gas Lift Cylinder
• Adjustment Lever Mechanism
• All necessary hardware (screws, washers, etc.)
• Assembly Tools (e.g., Allen wrench)
• Detailed Instruction Manual

For your convenience, all accessories include additional backups.

Assembly Instructions

The FurnitureR Ergonomic Armless Office Chair is designed for easy assembly, typically taking about 20 minutes. Follow these steps:

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
2. Attach Gas Lift to Base: Insert the gas lift cylinder into the center hole of the cross-leg base. Ensure it is firmly seated.
3. Attach Mechanism to Seat: Secure the adjustment lever mechanism to the underside of the seat cushion using the provided screws. Ensure the lever is facing the front of the seat.
4. Connect Seat to Gas Lift: Place the assembled seat onto the gas lift cylinder. Apply gentle downward pressure to ensure a secure connection.
5. Final Check: Verify that all screws are tightened and the chair is stable before use.

If you encounter any problems during installation, please contact our customer support for assistance.

Image: A close-up view of the chair's sturdy cross-leg base and the height adjustment lever.

Operating Instructions

Your FurnitureR Ergonomic Armless Office Chair offers several adjustable features for personalized comfort:

• Height Adjustment: To adjust the seat height, lift the lever located on the left side of the seat. While seated, lift the lever to lower the seat. To raise the seat, lift the lever while standing or with minimal weight on the seat. The adjustable height range is from 42 cm to 54.5 cm (from seat cushion to floor).
• 360-Degree Swivel: The chair is designed to swivel 360 degrees, allowing for easy movement and access to different areas of your workspace without needing to reposition the entire chair.
• Reclining/Rocking Function: The chair features a 110° rocking function. To activate the recline, lift the left lever. The seat can then be tilted back and locked at a 20° angle, suitable for reading, watching TV, gaming, or other leisure activities. Push the lever back down to lock the chair in an upright position.

Video: This video demonstrates the height adjustment and rocking features of the FurnitureR Ergonomic Armless Office Chair.

Image: A visual representation of the chair's adjustable height, 360-degree swivel, and 110-degree rocking motion.

Maintenance

To ensure the longevity and appearance of your FurnitureR chair, follow these simple maintenance guidelines:

• Cleaning: For general cleaning, wipe the upholstered fabric with a damp cloth. For tougher stains, a mild fabric cleaner can be used. Avoid harsh chemicals or abrasive materials.
• Inspection: Periodically check all screws and connections to ensure they are tight. Retighten if necessary.
• Weight Limit: Always adhere to the maximum weight capacity of 120 kg (265 lbs) to prevent damage.

Troubleshooting

If you encounter any issues with your chair, please refer to the following common solutions:

• Chair is Wobbly: Ensure all screws are securely tightened. Check that the gas lift is properly seated in both the base and the seat mechanism.
• Height Adjustment Not Working: Verify that the lever is fully engaged when attempting to adjust the height. If the gas lift is unresponsive, it may need replacement.
• Chair Does Not Recline: Ensure the recline lever is pulled up to unlock the rocking mechanism. Check for any obstructions preventing the backrest from tilting.
• Squeaking Noises: Apply a small amount of silicone lubricant to moving parts or connections if squeaking occurs.

If the problem persists after attempting these solutions, please contact customer support.

Specifications

Image: A detailed diagram illustrating all key dimensions and the 120 kg weight capacity of the chair.

Warranty and Support

FurnitureR is committed to providing high-quality products. While specific warranty details are not provided in this manual, we offer support for any issues you may encounter.

• Assembly Assistance: If you require help with assembly or have questions about the product, please do not hesitate to contact our customer service team.
• Defective Parts: In the event of defective or missing parts, please contact us immediately for replacements.

For customer service inquiries, please refer to the contact information provided at the point of purchase or on the FurnitureR official website.