Introduction
Welcome to your OTHOWE Running Boards instruction manual. This guide provides detailed information on the installation, operation, maintenance, and specifications of your new running boards. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Compatibility and Fitment
These running boards are designed for specific vehicle models. Please verify your vehicle's compatibility before installation.
Compatible Models:
- 2019-2025 Chevy Silverado/Sierra 1500 Crew Cab
- 2020-2025 Chevy Silverado/Sierra 2500HD 3500HD Crew Cab with 4 Full-Size Doors
Important Notes:
- Does NOT fit 2019 Silverado 1500LD & Sierra 1500 Limited.
- Does NOT fit Double Cab (3/4 Rear Size Door).
- Not for Diesel Models.
Product Features
Material and Durability
These nerf bars are constructed from heavy-duty carbon steel, ensuring durability and strength. The surface features a rust-proof dual-stage textured black powder coating for enhanced corrosion resistance and a robust finish. The maximum load capacity is 450 lbs.
Enhanced Convenience and Safety
The 4.5-inch plastic pedal pads feature a non-slip texture, providing a secure and safe step for passengers, including children and older individuals, when entering or exiting the vehicle. The running boards also offer a degree of protection to the truck body against minor impacts.
Design
The curved oval design of the side steps ensures proper spacing between the step bar and the truck, integrating seamlessly with the vehicle's aesthetics while providing functional access.
Setup and Installation
Follow these instructions carefully for a successful installation.
Included Components
The package contains:
- 2 Running Boards (one for the left side, one for the right side)
- Mounting Brackets
- Hardware Kit
- Detailed Instructions
Installation Process
Installation is a direct bolt-on process, requiring no welding or drilling. Locate the factory mounting points on your vehicle's frame. Attach the brackets to these points using the provided hardware. Then, secure the running boards to the installed brackets. Ensure all hardware is securely fastened according to the torque specifications in the detailed instructions. It is recommended to have a second person assist during installation for easier alignment and safety.
Operating Instructions
To use the running boards, simply step onto the non-slip pedal pad when entering or exiting your vehicle. The boards are designed to provide a stable and secure platform. Always ensure your footing is firm before applying full weight.
Maintenance
Proper maintenance will extend the life and appearance of your running boards.
- Regular Inspection: Periodically inspect the running boards for any signs of wear, damage, or loose fasteners. Check for corrosion, especially in areas exposed to road salt or harsh weather conditions.
- Cleaning: Clean the boards with mild soap and water to remove dirt, mud, and debris. Avoid abrasive cleaners, stiff brushes, or harsh chemicals that could damage the powder coating or plastic pads. Rinse thoroughly and dry to prevent water spots.
- Hardware Check: Regularly check and tighten all mounting hardware to ensure safety and stability. Loose hardware can lead to rattling or detachment.
Troubleshooting
If you encounter any issues, refer to the following common troubleshooting tips.
Loose Running Boards
If the running boards feel loose or unstable after installation, re-check all mounting bolts and brackets. Ensure they are correctly positioned and tightened to the recommended torque specifications found in your detailed instruction sheet. Over time, vibrations can cause bolts to loosen, so periodic checks are important.
Difficulty Aligning
Ensure the correct running board is installed on the passenger and driver side. Although they may appear similar, there can be slight measurement differences or bracket orientations for proper alignment with the vehicle's factory mounting points. Refer to the included instructions to identify the correct side for each board.
Cosmetic Issues (e.g., Visible Hardware)
Some users may find the appearance of certain hardware (e.g., chrome bolts) undesirable against the black finish. If this is a concern, consider using black-coated bolts or applying a suitable, durable black paint to the bolt heads after installation to match the running board's aesthetic.
Specifications
| Brand | OTHOWE |
| Material | Carbon Steel |
| Exterior Finish | Dual-Stage Textured Black Powder |
| Color | BLACK |
| Item Dimensions (L x W x H) | 86 x 4.3 x 3 inches |
| Weight Limit | 450 Pounds |
| Vehicle Service Type | Truck |
Warranty and Support
For warranty information or technical support regarding your OTHOWE Running Boards, please refer to the specific documentation included with your product package. It is advisable to retain your purchase receipt as proof of purchase for any warranty claims. If further assistance is needed, please contact OTHOWE customer service through the retailer where the product was purchased or via the official OTHOWE website.