Introduction
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your Demeyere Industrial Display Cabinet, Model 130665. Please read all instructions carefully before assembly and use to ensure safe and proper functioning of the product.
The Demeyere Industrial Display Cabinet features a robust design with a Kronberg oak and sidewalk paper decor finish. It includes two tempered glass doors and two panel doors, offering versatile storage and display options. The cabinet is constructed from engineered wood with a moisture-resistant melamine coating.
Figure 1: Front view of the Demeyere Industrial Display Cabinet.
Setup and Assembly
Safety Warning: Assemble with caution, following the provided instructions. Install securely to the floor to prevent tipping hazards. This product will be shipped in multiple packages, which may be delivered at different times.
Unpacking
- Carefully open all packages and remove components.
- Verify all parts are present against the included parts list (not provided in this manual, refer to packaging).
- Place all components on a soft, clean surface to prevent scratches during assembly.
Assembly Instructions
Detailed assembly instructions are provided with the product packaging. Please follow them step-by-step. Key components include:
- Particle board panels (18mm top, 15mm sides, front, drawers, uprights, back, partitions, doors).
- 2 tempered glass doors.
- 2 panel doors.
- 2 adjustable shelves (one wood, one glass).
- Plastic bar handles.
Figure 2: Interior view showing adjustable shelves.
Securing the Cabinet
As a floor-mounted unit, it is crucial to secure the cabinet to a wall to prevent accidental tipping, especially in households with children or pets. Use appropriate wall anchors and screws for your wall type (not included, typically provided with the product or purchased separately).
Operating Instructions
Using the Doors
The cabinet features two tempered glass doors for displaying items and two panel doors for concealed storage. Gently open and close the doors using the integrated plastic bar handles.
Figure 3: Detail of the plastic bar handle.
Adjusting Shelves
The cabinet includes two adjustable shelves (one wood, one glass). These shelves can be repositioned to different heights to accommodate various item sizes. To adjust a shelf:
- Remove all items from the shelf.
- Carefully lift the shelf and remove it from its supports.
- Relocate the shelf supports to the desired height. Ensure all four supports are at the same level.
- Place the shelf back onto the supports, ensuring it is stable and level.
The useful dimensions for the wooden shelves are L 96.2 x W 42.9 cm, and for the glass shelf, L 96 x W 40.5 cm.
Care and Maintenance
Regular care will help maintain the appearance and longevity of your Demeyere Industrial Display Cabinet.
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the melamine coating and finish.
- Spills: Immediately wipe up any spills to prevent moisture damage, especially on the engineered wood components. The melamine coating offers moisture resistance, but prolonged exposure should be avoided.
- Glass Doors: Clean glass surfaces with a standard glass cleaner and a lint-free cloth.
- Sunlight: Avoid placing the cabinet in direct sunlight for extended periods, as this may cause fading or discoloration over time.
- Temperature and Humidity: Maintain a stable room temperature and humidity level to prevent warping or cracking of the wood components.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Cabinet feels unstable or wobbly. | Not properly secured to the wall; uneven floor; loose assembly hardware. | Ensure the cabinet is securely anchored to the wall. Check if the floor is level; use shims if necessary. Tighten all assembly screws. |
| Doors do not close properly or are misaligned. | Hinges are loose or misadjusted; cabinet frame is not square. | Adjust the door hinges according to the assembly instructions. Ensure the cabinet is assembled squarely and all connections are tight. |
| Shelves are not level. | Shelf supports are not at the same height. | Remove items from the shelf and ensure all four shelf supports are inserted into the corresponding holes at the same level. |
| Scratches or minor damage to the surface. | Accidental impact or abrasive cleaning. | For minor scratches, touch-up pens or furniture repair kits matching the finish may be used. Avoid abrasive materials for cleaning. |
Product Specifications
| Brand | Demeyere |
| Model Number | 130665 |
| Color | Oak and Hammered Dark Grey |
| Product Dimensions (L x W x H) | 99.8 cm x 43.3 cm x 173.8 cm |
| Item Weight | 56.9 Kilograms |
| Material | Engineered Wood |
| Special Feature | Moisture resistant (Melamine coating) |
| Mounting Type | Floor Mount |
| Room Type | Dining Room |
| Country of Origin | France |
| ASIN | B0CG7H7C3W |
Warranty Information
The Demeyere Industrial Display Cabinet comes with a 2-year warranty from the date of purchase. This warranty covers manufacturing defects under normal use and service. Please retain your proof of purchase for warranty claims.
Demeyere is a PEFC (Programme for the Endorsement of Forest Certification) certified company since 2005, ensuring responsible sourcing of wood materials.
For specific warranty terms and conditions, please refer to the documentation included with your product or contact Demeyere customer service.
Customer Support
If you have any questions regarding the assembly, operation, or maintenance of your Demeyere Industrial Display Cabinet, or if you require assistance with missing or damaged parts, please contact Demeyere customer support.
Spare Parts: Information regarding the availability of spare parts is currently unavailable. Please contact customer service for assistance with specific part requests.
Contact information for Demeyere customer service can typically be found on the product packaging or on the official Demeyere website.
