Tennant CS16 Walk-Behind Micro Scrubber

Introduction

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Tennant CS16 Walk-Behind Micro Scrubber. Please read this manual thoroughly before operating the machine to ensure proper use and to prevent injury or damage.

The Tennant CS16 micro floor scrubber is a compact, reliable, and user-friendly micro scrubber designed for effective cleaning in tight spaces. Its easy-to-use controls, low-profile design, and ergonomic handle ensure simple operation.

Figure 1: Tennant CS16 Walk-Behind Micro Scrubber. This image shows the compact design of the scrubber, including its handle, control panel, and brush assembly.

Key Features:

• Comfortable grip and adjustable handle for ergonomic operation.
• 3-stage vacuum motor for strong water pick-up.
• Large capacity: 3.9 gal solution tank / 4.4 gal recovery tank.
• Parabolic squeegee shape tracks the movement of the machine for excellent water pick-up.
• Brush cover made out of durable material.
• Simple no-tools, no-touch brush change system.

Safety Information

Always observe the following safety precautions to reduce the risk of injury or damage:

• Read and understand all instructions before operating the machine.
• Do not operate the machine if you are not feeling well or are under the influence of drugs or alcohol.
• Wear appropriate personal protective equipment (PPE) such as non-slip footwear and eye protection.
• Ensure the machine is turned off and unplugged (if applicable) before performing any maintenance or adjustments.
• Keep hands, feet, and loose clothing away from moving parts.
• Do not use the machine on inclines exceeding the manufacturer's recommendations.
• Store the machine in a dry, secure location away from children and unauthorized personnel.
• Use only manufacturer-approved replacement parts and accessories.

Setup

1. Unpacking

Carefully remove the scrubber from its packaging. Inspect the machine for any signs of damage that may have occurred during shipping. Report any damage to your supplier immediately.

2. Initial Battery Charge

The Tennant CS16 is battery powered. Before first use, ensure the batteries are fully charged. Connect the charger to the machine's charging port and plug it into a suitable power outlet. Refer to the charger's instructions for specific charging times and indicators.

3. Filling Solution Tank

1. Locate the solution tank fill port (capacity: 3.9 gallons).
2. Open the cap and fill the tank with clean water and an appropriate, low-foaming floor cleaning solution. Do not overfill.
3. Securely close the cap.

4. Brush Installation

The machine features a simple no-tools, no-touch brush change system. Refer to the specific instructions for attaching or replacing the brush. Ensure the brush is securely seated before operation.

Operating Instructions

1. Pre-Operation Checklist

• Ensure solution tank is filled.
• Check recovery tank is empty.
• Verify brush is correctly installed.
• Confirm battery is sufficiently charged.
• Inspect squeegee for damage or debris.

2. Starting the Machine

Turn the main power switch to the "ON" position. Engage the brush and vacuum motors using their respective controls on the handle. Adjust the handle to a comfortable operating height.

3. Cleaning Procedure

Push the machine forward at a steady pace, allowing the solution to be dispensed, the brush to scrub, and the squeegee and vacuum to pick up the dirty water. Overlap passes slightly to ensure complete coverage. For heavily soiled areas, a second pass or pre-soaking may be necessary.

4. Stopping the Machine

Disengage the brush and vacuum motors. Turn the main power switch to the "OFF" position. Park the machine in a safe, level area.

5. Emptying Recovery Tank

After each use, or when full, empty the recovery tank (capacity: 4.4 gallons). Locate the drain hose and empty the dirty water into a suitable drain. Rinse the tank with clean water to prevent odor and buildup.

Maintenance

Regular maintenance ensures optimal performance and extends the life of your Tennant CS16 scrubber.

Daily Maintenance:

• Empty and rinse both solution and recovery tanks.
• Clean the squeegee blades and check for wear. Replace if damaged.
• Remove and clean the brush. Inspect for debris or tangled material.
• Wipe down the exterior of the machine with a damp cloth.
• Charge batteries after each use.

Weekly Maintenance:

• Inspect all hoses and connections for leaks or damage.
• Check the condition of the battery terminals and clean if necessary.
• Lubricate moving parts as recommended by the manufacturer (refer to specific lubrication points in a detailed service manual if available).

Brush Replacement:

The brush cover is made of durable material, and the brush system is designed for easy, no-tools replacement. When the brush bristles show significant wear or are no longer effective, replace them following the instructions provided with the replacement brush.

Troubleshooting

This section provides solutions to common operational issues. For problems not listed here, contact customer support.

Specifications

Warranty and Support

This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, replacement parts, or service inquiries, please contact your authorized dealer or the manufacturer directly.

For additional protection, consider the available protection plans:

• 3-Year Protection Plan
• 4-Year Protection Plan
• Complete Protect (monthly plan)

Note: Protection plans are separate from the manufacturer's warranty and offer extended coverage.