ORYMUSE 30-Inch Dual Zone Wine and Beverage Refrigerator

1. Important Safety Information

Please read all instructions carefully before using this appliance to ensure safe operation and to prevent injury or damage. Keep this manual for future reference.

• Electrical Safety: Ensure the appliance is connected to a properly grounded electrical outlet with the correct voltage (115 Volts). Do not use extension cords or ungrounded adapters.
• Placement: Place the refrigerator on a firm, level surface. Ensure adequate ventilation around the unit, especially at the front and rear. Avoid direct sunlight or heat sources.
• Child Safety: This appliance is equipped with a door lock. Keep the keys out of reach of children to prevent accidental entrapment or injury.
• Initial Setup: After receiving the refrigerator, allow it to stand upright for at least 24 hours before plugging it in. This allows the refrigerant to settle, preventing potential damage to the cooling system.
• Certification: This product is ETL and DOE certified, ensuring it meets safety and energy efficiency standards.

2. Product Overview

The ORYMUSE 30-inch Dual Zone Wine and Beverage Refrigerator is designed to store both wine and various beverages at their optimal temperatures. It features two independent cooling zones and can be installed as a built-in or freestanding unit.

Figure 2.1: Front view of the ORYMUSE 30-inch Dual Zone Wine and Beverage Refrigerator, showcasing its dual doors and stainless steel finish.

Key Features:

• Independent Dual-Zone Cooling: The left zone maintains temperatures from 35-50°F (suitable for beer, soda, water), and the right zone from 41-64°F (ideal for wines).
• Quiet and Efficient Cooling: Equipped with a powerful compressor cooling system that operates with minimal vibration and noise, typically under 40 dB.
• Intuitive Touch Screen Controls: Easily adjust temperature settings and control the interior blue LED lighting with a user-friendly touch interface located on the top panel of each zone.
• Seamless Design and Safety: Features double-tempered glass doors for enhanced insulation and UV protection, soft-close doors with magnetic seals, and a bottom door lock for added security.
• Large Capacity: Designed to hold approximately 118 standard 12oz cans in the beverage zone and 29 standard 750ml wine bottles in the wine zone.
• Beechwood Shelves: The wine zone features durable beechwood shelves for optimal wine bottle storage.

Figure 2.2: Detailed view highlighting key features including blue LED ambient lighting, innovative French doors, beechwood shelves, and the safety lock design.

Figure 2.3: Illustration of the refrigerator's large capacity for cans and bottles, along with the removable shelf feature for flexible storage.

3. Setup and Installation

3.1 Unpacking

Carefully remove all packaging materials. Inspect the refrigerator for any shipping damage. Note that one of the four feet may be packaged separately; ensure all four feet are attached before moving or positioning the unit to prevent floor damage.

3.2 Placement

• Choose a location with a stable, level floor capable of supporting the refrigerator's weight when fully loaded.
• Ensure proper air circulation. The unit is designed with front ventilation, allowing for both built-in and freestanding installations. Maintain at least 1 inch of clearance around the sides and back for optimal performance.
• Avoid placing the appliance near heat sources (e.g., ovens, radiators, direct sunlight) or in areas with extreme temperature fluctuations.

Figure 3.1: The refrigerator supports both built-in installation within cabinetry and freestanding placement.

3.3 Handle Assembly

The door handles may require assembly. Align the handle with the pre-drilled holes on the door and secure it using the provided screws. Ensure the handles are firmly attached.

3.4 Power Connection and Initial Startup

After positioning the refrigerator and allowing it to stand for 24 hours, plug the power cord into a dedicated, grounded electrical outlet. The unit will begin cooling automatically. Allow several hours for the internal temperature to stabilize before loading beverages.

4. Operating Instructions

4.1 Temperature Control

Each zone has an independent touch control panel located above its door. Use the 'Up' and 'Down' arrows to adjust the desired temperature for each zone. The display will show the set temperature, then revert to the actual internal temperature once set.

Figure 4.1: The touchscreen interface allows for easy adjustment of temperature settings for both the beer and wine zones.

4.2 Lighting Control

Press the light bulb icon on the touch control panel to turn the interior blue LED lighting on or off. This feature allows for visibility of contents without opening the door.

4.3 Door Lock Operation

Insert the provided key into the lock located at the bottom of the door and turn to lock or unlock the door. Remove the key after locking or unlocking.

4.4 Shelf Adjustment and Removal

The shelves are removable to accommodate different bottle and can sizes. To remove a shelf, gently pull it forward until it clears the support rails. To reinsert, align the shelf with the rails and slide it back into position.

5. Maintenance and Care

5.1 Cleaning

• Interior: Unplug the appliance before cleaning. Use a soft cloth and a mild, non-abrasive cleaning solution to wipe down the interior surfaces. Avoid harsh chemicals or abrasive cleaners.
• Exterior: Clean the stainless steel exterior with a soft cloth and a stainless steel cleaner. For glass doors, use a glass cleaner.
• Door Seals: Regularly clean the magnetic door seals to ensure a tight seal and efficient operation.

5.2 Defrosting

This refrigerator features an automatic defrost system, which minimizes frost buildup. If any significant frost accumulation occurs, unplug the unit and allow the frost to melt naturally. Do not use sharp objects to remove frost.

Figure 5.1: The upgraded frost-free design ensures the refrigerator maintains a frost-free status, preventing condensation droplets.

5.3 Power Outage

In case of a power outage, keep the doors closed to maintain the internal temperature for as long as possible. The unit will resume operation automatically once power is restored.

5.4 Long-Term Storage

If the refrigerator will not be used for an extended period, unplug it, empty its contents, clean the interior thoroughly, and leave the doors slightly ajar to prevent odors and mold growth.

6. Troubleshooting

Before contacting customer support, please refer to the following common issues and their potential solutions:

If the problem persists after attempting these solutions, please contact ORYMUSE customer support for assistance.

7. Specifications

Detailed technical specifications for the ORYMUSE 30-inch Dual Zone Wine and Beverage Refrigerator (Model HXYC200).

Figure 7.1: Product dimensions: 34.25 inches (H) x 30.31 inches (W) x 23.03 inches (D).

8. Warranty and Support

The ORYMUSE 30-inch Dual Zone Wine and Beverage Refrigerator comes with a 1-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical support, or any questions not covered in this manual, please contact ORYMUSE customer support. Refer to the product packaging or the ORYMUSE official website for contact details.