Introduction
This manual provides important information for the safe and efficient operation of your Sunbeam Restful Heated Mattress Pad. Please read all instructions carefully before use and retain for future reference.
Image: The Sunbeam Restful Heated Mattress Pad, folded, with its two detachable controllers visible. This image shows the overall appearance of the product.
Safety Information
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury to persons.
- Do not use with infants, children, incapacitated persons, or anyone insensitive to heat.
- Do not use with a damaged cord or plug.
- Do not use with other heating devices.
- Ensure the mattress pad is properly secured to the mattress to prevent shifting.
- Unplug the mattress pad from the outlet when not in use or before cleaning.
- Do not dry clean this product. Dry cleaning solvents may damage the insulation.
- Do not iron the mattress pad.
- Do not use pins or other metallic objects with this product.
Setup
- Unpack: Carefully remove the heated mattress pad from its packaging.
- Positioning: Place the mattress pad directly on your mattress, ensuring it lies flat and smooth. The fitted skirt should securely wrap around the mattress.
- Connect Controllers: For King size pads, there are two controllers. Connect each controller cord to the corresponding receptacle on the mattress pad. Ensure connections are firm.
- Plug In: Plug the power cords from the controllers into a 120V AC electrical outlet. Avoid using extension cords.
Image: The heated mattress pad fitted onto a bed, illustrating its ability to fit mattress depths up to 16 inches. This shows proper placement on a mattress.
Operating Instructions
Your Sunbeam Restful Heated Mattress Pad features 12 heat settings and a 12-hour auto-shutoff function for personalized comfort and safety.
Image: A heated mattress pad on a bed, highlighting the "Dual Zone Control" feature, which allows independent temperature settings for each side of the bed.
- Power On: Press the power button on the controller to turn on the mattress pad.
- Adjust Heat Setting: Use the dial or buttons on the controller to select your desired heat level from 1 to 12. Start with a lower setting and adjust as needed.
- Dual Zone Control (King Size): Each controller operates one side of the mattress pad independently. This allows two users to set their preferred warmth level.
- Auto Shut-Off: The mattress pad is equipped with a 12-hour selectable auto-shut off function for safety and energy conservation. The unit will automatically turn off after 12 hours of continuous use.
- Power Off: Press the power button again to turn off the mattress pad. Unplug from the wall outlet when not in use.
Image: The heated mattress pad laid out on a bed, emphasizing its primary function of providing warmth for comfortable sleep.
Image: A hand gently touching the surface of the mattress pad, illustrating its soft and cozy fabric designed for restful nights.
Maintenance and Care
The Sunbeam Restful Heated Mattress Pad is machine washable for easy care.
- Disconnect: Ensure the mattress pad is unplugged from the wall outlet. Detach all controllers from the mattress pad by gently pulling the connector away from the pad.
- Pre-soak (Optional): For best results, pre-soak the mattress pad for 15 minutes in cold water with a mild detergent.
- Wash: Machine wash on the gentle or delicate cycle in cold water. Do not use bleach.
- Rinse: Rinse on the normal cycle.
- Spin: Spin on the normal cycle to remove excess water.
- Dry: Tumble dry on low heat for 5-10 minutes. Remove while still damp and air dry over a clothesline or shower rod. Do not use commercial dryers. Do not iron.
- Storage: When not in use, store the mattress pad neatly folded in a cool, dry place.
Image: A washing machine with laundry, accompanied by text indicating "Easy care Machine washable" and an inset image showing how to "Unplug controller" before washing.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mattress pad does not heat. | Not plugged in; controller not connected properly; power outage. | Ensure power cord is securely plugged into a working outlet. Check that controller cords are firmly connected to the pad. Verify power is available. |
| Pad heats unevenly. | Pad is bunched or folded; internal wiring issue. | Ensure the pad is spread flat on the mattress. If problem persists, contact customer support. |
| Controller light blinks or flashes. | Error code; connection issue. | Unplug the unit from the wall outlet for 30 seconds, then plug it back in. Ensure all connections are secure. If the issue continues, contact customer support. |
Specifications
- Brand: Sunbeam
- Model Name: Restful Heated Mattress Pad
- Product Dimensions: 80"L x 76"W x 16"Th (King Size)
- Material: Polyester
- Heat Settings: 12
- Auto Shut-Off: 12 Hours
- Care Instructions: Machine Washable
- Item Weight: 5 pounds
- ASIN: B0CG2T8MXQ
- Item Model Number: c48977c5-b1c9-4b10-a9e9-67f21280974b
- Date First Available: August 15, 2023
Warranty and Support
This Sunbeam product comes with a 5-year Limited Warranty. For warranty claims or technical support, please refer to the contact information provided with your product packaging or visit the official Sunbeam website.
Image: The retail packaging box for the Sunbeam Heated Mattress Pad, displaying brand information, product details, and a UPC. The box indicates a 5-year limited warranty.
For more information, visit the Official Sunbeam Store.
UPC: 0027045749633