1. Introduction
Thank you for choosing the Yaheetech Upholstered Rocking Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new rocking chair. Please read it thoroughly before use and retain it for future reference.
This rocking chair is designed for comfort and relaxation, featuring a generous seat, high backrest, wide armrests, and convenient side pockets. Its durable construction and minimalist design make it a versatile addition to various living spaces.
2. Safety Information
⚠ IMPORTANT SAFETY INSTRUCTIONS ⚠
- Do not exceed the maximum weight capacity of 300 pounds (136 kg). Overloading may cause damage or injury.
- Always use the chair on a hard, level floor surface to ensure stability and prevent tipping.
- Ensure all bolts and fasteners are securely tightened before and during use. Periodically check and re-tighten as necessary.
- Keep small children and pets away from the chair during assembly.
- Do not stand on the chair or use it as a step stool.
- Avoid placing the chair near open flames or excessive heat sources.
- Keep hands and fingers clear of moving parts during rocking.
3. Package Contents
Before beginning assembly, ensure all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
| Part | Description | Quantity |
|---|---|---|
| A | Upholstered Seat and Backrest Assembly | 1 |
| B | Left Rocker Base | 1 |
| C | Right Rocker Base | 1 |
| D | Connecting Bar | 1 |
| E | Hardware Pack (Bolts, Washers, Allen Wrench) | 1 |
4. Setup and Assembly
Assembly is required. It is recommended to have two people for easier assembly. Please follow these steps carefully:
- Unpack all components and lay them out on a soft, clean surface to prevent scratching. Verify all parts are present according to the "Package Contents" list.
- Attach the Connecting Bar (D) between the Left Rocker Base (B) and Right Rocker Base (C) using the provided bolts and Allen wrench from the Hardware Pack (E). Ensure the curved parts of the rocker bases face the same direction.
- Carefully align the pre-drilled holes on the bottom of the Upholstered Seat and Backrest Assembly (A) with the holes on the top of the assembled rocker base.
- Secure the Upholstered Seat and Backrest Assembly (A) to the rocker base using the remaining bolts and washers from the Hardware Pack (E). Tighten all bolts firmly, but do not overtighten.
- Once assembled, gently rock the chair to ensure stability and proper function. Re-tighten any loose bolts if necessary.
Figure 1: Product Dimensions and Maximum Weight Capacity.
Figure 2: Detail of the solid rubber wood legs, providing strong and long-lasting support.
5. Operating Instructions
The Yaheetech Upholstered Rocking Chair is designed for comfortable seating and gentle rocking motion.
- Seating: The generous seat (21.7'' wide x 21'' deep) and thick foam padding provide ample space and comfort for extended periods of sitting.
- Rocking Function: Gently push off with your feet to initiate a smooth, quiet rocking motion. The anti-tipping stoppers at the ends of the rocker legs prevent excessive backward tilting, ensuring safety.
- Side Pockets: Utilize the spacious storage pockets (13.6'' L x 8'' W) located on both sides of the chair to keep books, magazines, remote controls, or other small items within easy reach.
Figure 3: Features of the comfortable upholstered seat.
Figure 4: Convenient side pocket for storage.
6. Maintenance
Proper care will extend the life and appearance of your rocking chair.
- Cleaning: The premium polyester boucle fabric is designed for easy maintenance. For daily cleaning, gently wipe with a soft, damp cloth. For spills, blot immediately with a clean, dry cloth. Avoid harsh chemicals or abrasive cleaners.
- Wood Care: The rubber wood legs can be cleaned with a soft, dry cloth. Avoid excessive moisture.
- Inspection: Periodically inspect all connections and fasteners to ensure they remain tight. Re-tighten as needed to maintain stability.
- Placement: Avoid prolonged exposure to direct sunlight or extreme temperatures, which can cause fading or damage to the fabric and wood.
Figure 5: Detail of the durable and breathable polyester boucle fabric.
7. Troubleshooting
If you encounter any issues with your rocking chair, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair feels wobbly or unstable. | Loose bolts or uneven floor surface. | Check and tighten all assembly bolts. Ensure the chair is on a flat, hard surface. |
| Squeaking noise during rocking. | Friction between wood components or loose connections. | Apply a small amount of silicone lubricant to the joints of the rocker bases. Check and tighten all bolts. |
| Fabric appears wrinkled or creased. | Normal compression from sitting or packaging. | The fabric is designed to resist wrinkling. Light steaming or gentle patting may help. Avoid excessive heat. |
If the problem persists, please contact Yaheetech customer support for assistance.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Yaheetech |
| Model Name | Rocking Chairs (YTr7kl0001001) |
| Color | Ivory |
| Product Dimensions (D x W x H) | 39"D x 28"W x 40.5"H |
| Maximum Weight Recommendation | 300 Pounds (136 kg) |
| Material Type | Boucle Fabric (Polyester), Rubber Wood |
| Fill Material | Foam |
| Seat Dimensions (W x D) | 21.7"W x 21"D |
| Seat Height | 21 Inches |
| Backrest Height | 26.2 Inches |
| Arm Height | 29 Inches |
| Item Weight | 47.2 pounds (21.4 kg) |
| Country of Origin | Vietnam |
9. Warranty and Support
Yaheetech is committed to providing quality products. For any questions, concerns, or assistance with your product, please contact our customer support team.
- Returns: This product is eligible for 30-day easy returns. Please refer to your purchase platform's return policy for details.
- Customer Support: For direct assistance, please visit the Yaheetech store or contact their customer service as per the details provided at the point of purchase.
- Additional Resources: An installation manual in PDF format is available for download here.
