Alxum Nintendo Switch Game Card Reader with Remote Control and TV Docking Station (Model AX-G1002F)

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Alxum Nintendo Switch Game Card Reader with Remote Control and TV Docking Station. This device is designed to enhance your Nintendo Switch and Switch OLED gaming experience by offering convenient game switching, TV output, and expanded connectivity options.

2. Important Safety Information

• Read all instructions carefully before using the product.
• Keep this manual for future reference.
• Do not expose the device to water, moisture, or extreme temperatures.
• Avoid dropping or subjecting the device to strong impacts.
• Use only approved power adapters and cables.
• Do not attempt to disassemble or repair the device yourself. Contact qualified service personnel.
• Ensure proper ventilation when in use.

3. Product Overview

The Alxum Game Card Reader and TV Docking Station combines multiple functionalities into one compact unit:

• Detachable Design: Composed of a TV docking station, game card reader, and remote control, allowing for flexible use and portability.
• Foldable Docking Station: Supports folding for easy storage and transport.
• HDMI 2.0 Output: Supports up to 4K@30Hz video output (Nintendo Switch supports 1080P output). Compatible with HDCP 1.3/2.2/2.3, HDR10, and HDR12.
• Gigabit Ethernet: RJ45 interface for 10/100/1000Mbps network transmission, compliant with IEEE 802.3, 802.3u, and 802.3ab. Supports IPv4/IPv6.
• USB 2.0 HUB: Three USB 2.0 ports for expanding USB peripherals, with a transmission rate of 480Mbps.
• PD 3.0 Type-C Charging: Fast charging port with a maximum power supply of 100W (20V/5A), compatible with Nintendo Switch and Switch OLED TV dock mode.
• 4-in-1 Game Card Reader: Allows simultaneous insertion and reading of up to four game cards.
• Remote Control: Uses stable 433 MHz RF radio frequency technology for remote game switching, with an identification distance of up to 10 meters (32.8 feet) without obstructions.
• Game Card Storage: Includes one slot for storing an additional game card.

Figure 1: Multi-function Switch Game Dock and Card Reader with labeled ports including HDMI, RJ45, USB-A, PD3.0 Power Port, Game Card Read Slots, and a Storage slot.

Figure 2: The Alxum Switch Dock features a foldable design for portability, with dimensions of 170mm (6.69 inches) length, 82mm (3.23 inches) width, and 31.3mm (1.23 inches) height when folded.

4. Setup Instructions

Follow these steps to set up your Alxum Game Card Reader and TV Docking Station:

1. Attach to Switch Dock: Place your Nintendo Switch or Switch OLED console into the docking station. Ensure it is securely seated.
2. Connect Power: Connect the USB-C power cable to the PD3.0 Type-C charging port on the dock. Use an appropriate power adapter (original Nintendo Switch adapter or a PD protocol third-party adapter).
3. Insert Game Card Reader Plug: Insert the game card reader plug into the game card slot of your Nintendo Switch console.
4. Insert Game Cards: Insert up to four game cards into the designated game card read slots on the Alxum dock. You can also use the additional storage slot for one more card.
5. Connect to TV (Optional): Connect an HDMI cable from the dock's HDMI port to your TV's HDMI input.
6. Connect Ethernet (Optional): For a wired internet connection, connect an Ethernet cable to the RJ45 port on the dock.
7. Connect USB Peripherals (Optional): Connect any USB peripherals (e.g., controllers, keyboards) to the USB 2.0 ports.

Figure 3: Setup steps for the Alxum Switch Dock, illustrating attaching the console, connecting power, inserting the game card reader plug, and inserting game cards.

Figure 4: The Alxum Switch Dock in operation, showing a Nintendo Switch console docked and connected to a TV, with the remote control nearby.

5. Operating Instructions

5.1. Game Switching

The Alxum dock offers two methods for switching between inserted game cards:

• Mode 1: One-touch Button: Press the switch button located on the side of the dock to cycle through the inserted game cards. The LED indicator will change color to show which game is currently selected.
• Mode 2: Remote Control: Use the provided remote control to switch games wirelessly. The remote control operates using 433 MHz RF radio frequency technology with an effective distance of up to 10 meters (32.8 feet) without obstructions.

Figure 5: Illustration of the two game switching modes: pressing the button on the dock (Mode 1) and using the remote control (Mode 2).

Figure 6: The LED indicator on the dock changes colors (e.g., white, cyan, yellow, red) to visually represent which of the four game card slots is currently active.

5.2. TV Output

When connected to a TV via HDMI, the dock supports video output up to 4K@30Hz. Please note that the Nintendo Switch console itself only supports a maximum output resolution of 1080P.

Figure 7: The Alxum Switch Dock facilitates playing Nintendo Switch games on a TV, supporting up to 4K Ultra HD output, though the Switch console itself outputs at 1080P.

5.3. Charging

The PD 3.0 Type-C port provides fast charging for your Nintendo Switch or Switch OLED console while docked, with a maximum power delivery of 100W.

5.4. Network Connectivity

The integrated Gigabit Ethernet port allows for a stable and high-speed wired internet connection for your Nintendo Switch, supporting 10/100/1000Mbps speeds.

5.5. USB Peripherals

The three USB 2.0 ports can be used to connect various USB accessories such as wired controllers, keyboards, or other compatible devices.

6. Maintenance

• Clean the device with a soft, dry cloth. Do not use liquid or aerosol cleaners.
• Keep the ports free from dust and debris.
• Store the device in a cool, dry place when not in use.
• Ensure the remote control battery (CR2032 lithium battery, not included) is replaced when necessary.

7. Troubleshooting

7.1. Remote Control Not Working

If the remote control is not responding, it may need to be re-paired with the game card reader. Follow these steps:

1. Disconnect the USB-C power cable from the dock, then reconnect it. Long press the switch button on the dock to power it on.
2. Press and hold the switch button on the dock for approximately 4 seconds until the LED light turns yellow.
3. The yellow light indicates that the dock has entered pairing mode.
4. Press and hold the switch button on the remote control for about 2 seconds to initiate pairing.
5. When the main body LED light on the dock turns green, the pairing is successful.

Ensure the remote control has a working CR2032 lithium battery installed.

7.2. No TV Output

• Check that the HDMI cable is securely connected to both the dock and the TV.
• Ensure your TV is set to the correct HDMI input source.
• Verify that the Nintendo Switch console is properly seated in the dock and powered on.
• Confirm that the dock is receiving adequate power from the USB-C power adapter.

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Alxum website. Keep your proof of purchase for warranty claims.