1. Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Martha Stewart Taytum Swivel Task Chair. Designed for home office use, this chair combines traditional design with modern functionality, featuring white faux leather upholstery and a polished brass frame. Please read this manual thoroughly before assembly and use to ensure safe and correct operation.
Image 1.1: The Martha Stewart Taytum Swivel Task Chair in a home office environment, showcasing its white faux leather and polished brass frame.
2. Safety Information
WARNING: This product requires assembly. Always follow the included instructions for safe assembly. Keep fingers and other body parts away from moving parts during assembly and use. Do not exceed the maximum weight capacity of 300 lbs. Use the adjustable height and swivel features with caution to prevent injury.
- Ensure all bolts are securely tightened before use.
- Do not stand on the chair.
- Avoid placing heavy objects on the chair's backrest or armrests.
- Keep children and pets away from the chair during assembly.
- Regularly inspect the chair for loose parts or damage. Discontinue use if any damage is found.
3. Package Contents
Before beginning assembly, ensure all parts are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.
- Chair Seat with Backrest (1)
- Armrests (2)
- Chair Base (1)
- Casters (5)
- Gas Lift Cylinder (1)
- Gas Lift Cover (1)
- Assembly Hardware (Bolts, Washers, Allen Wrench)
- Instruction Manual (1)
4. Assembly Instructions
Assembly is quick and easy with the included tools. It is recommended to assemble the chair on a soft, clean surface to prevent scratches.
- Attach Casters to Base: Insert each of the five casters into the holes at the end of each leg of the chair base. Push firmly until they click into place.
- Insert Gas Lift: Place the gas lift cylinder into the center hole of the chair base. Cover the gas lift cylinder with the gas lift cover.
- Attach Armrests: Align the armrests with the pre-drilled holes on the sides of the chair seat. Secure them using the provided bolts and washers with the Allen wrench. Do not overtighten.
- Attach Seat to Gas Lift: Carefully place the assembled seat onto the top of the gas lift cylinder, ensuring it is centered and stable.
- Final Check: Verify that all bolts are tightened and the chair is stable before use.
Image 4.1: Dimensional view of the chair, illustrating its height, width, and depth for proper placement and fit.
5. Operating Instructions
Your Taytum Swivel Task Chair is designed for ease of use and comfort.
- Height Adjustment: To adjust the seat height, locate the pneumatic lever under the right side of the seat.
- To raise the seat: Lift the lever while taking your weight off the seat. The seat will rise automatically.
- To lower the seat: Lift the lever while remaining seated. The seat will lower.
- Swivel Function: The chair features a 360° swivel seat, allowing for easy rotation without moving the base.
- Mobility: The dual-wheel casters allow for smooth movement across various floor surfaces.
Image 5.1: Detail showing the easily adjustable multi-position gas lift and the functional 360° swivel seat with lumbar support.
6. Maintenance
Proper care will extend the life and appearance of your chair.
- Cleaning: Wipe the faux leather upholstery and polished brass frame with a dry cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish.
- Inspection: Periodically check all bolts and screws to ensure they are tight. Retighten if necessary.
- Caster Care: Keep casters free of debris (hair, dust) to ensure smooth rolling.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair does not adjust height. | Gas lift cylinder not properly installed or damaged. | Ensure the gas lift is fully inserted into the base and seat mechanism. If still not working, the gas lift may need replacement. |
| Chair is wobbly. | Loose bolts or uneven assembly. | Check and tighten all assembly bolts. Ensure the chair is on a flat, even surface. |
| Casters do not roll smoothly. | Debris caught in casters or damaged casters. | Remove any hair or debris from the casters. If damaged, casters may need replacement. |
8. Specifications
| Brand: | Martha Stewart |
| Model Name: | Taytum Swivel Task Chair |
| Model Number: | CH-142370-WH-GLD-MS |
| Color: | White Faux Leather/Polished Brass |
| Product Dimensions (Overall): | 25.5"D x 25.5"W x 36.25"H |
| Seat Size: | 17.25"W x 16.75"D x 20"H (Adjustable) |
| Back Size: | 17"W x 16.5"H |
| Arm Size: | 26.5"H from floor; 7.5"H from seat |
| Maximum Static Weight Capacity: | 300 lbs |
| Material: | Metal, Foam, Polyurethane (Faux Leather) |
| Special Feature: | Adjustable Height, Swivel, Lumbar Support |
| Product Care Instructions: | Wipe clean with dry cloth |
| Item Weight: | 26.4 pounds |
Image 8.1: Key features of the chair, including commercial quality, premium faux leather, pneumatic height adjustment, and faux leather wrapped arms.
9. Warranty and Support
For warranty information or customer support, please refer to the documentation included with your purchase or visit the official Martha Stewart website. If you have any questions or require assistance with your product, please contact the manufacturer's customer service department.