1. Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Maxim Lighting Akimbo Pendant Light, model 28279DBZAB. This transitional indoor light fixture features a dark bronze/antique brass steel finish with glass and wood shades, designed for spaces such as kitchen islands and dining rooms. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Figure 1: Maxim Lighting Akimbo Pendant Light in a dining room setting.
2. Important Safety Instructions
To reduce the risk of fire, electric shock, or injury to persons, please adhere to the following safety guidelines:
- WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- This fixture is rated for dry locations only. Do not install in damp or wet environments.
- Use only the specified bulb type and wattage. This fixture uses E26 Medium base LED bulbs, 7 watts maximum per bulb.
- Do not exceed the maximum wattage.
- Ensure the fixture is securely mounted to a structural element of the ceiling.
- Do not connect this fixture to an ungrounded electrical system.
- Handle glass and wood components with care to prevent breakage or damage.
3. Package Contents
Carefully unpack your fixture and check that all parts are included. If any parts are missing or damaged, contact your retailer immediately.
- Akimbo Pendant Light Fixture (pre-assembled components)
- Mounting Hardware Kit
- Glass Shades
- Wood Shades
- Instruction Manual
4. Installation Guide
Professional installation is recommended. Ensure you have all necessary tools before starting.
4.1. Preparation
- Turn off power: Locate the circuit breaker or fuse box and turn off the power to the junction box where the fixture will be installed.
- Gather tools: You will need a screwdriver, wire strippers, electrical tape, and possibly a ladder.
- Unpack: Carefully remove all components from the packaging.
4.2. Mounting the Fixture
- Attach the mounting bracket to the ceiling junction box using the provided screws. Ensure the bracket is securely fastened.
- Adjust the length of the pendant rods if necessary to achieve the desired hanging height.
- Carefully lift the fixture body towards the ceiling.
Figure 2: Central structure of the Akimbo Pendant Light.
4.3. Wiring
- Connect the fixture's ground wire (usually bare copper or green) to the house's ground wire (usually bare copper or green) using a wire nut.
- Connect the fixture's neutral wire (usually white) to the house's neutral wire (usually white) using a wire nut.
- Connect the fixture's hot wire (usually black) to the house's hot wire (usually black) using a wire nut.
- Carefully tuck all wires into the junction box.
4.4. Attaching Shades and Bulbs
- Secure the canopy to the mounting bracket with the provided screws.
- Gently attach the glass and wood shades to their respective sockets on the fixture arms. Ensure they are firmly seated but do not overtighten.
- Screw the E26 Medium base LED bulbs (not included, 7 watts max per bulb) into the sockets.
Figure 3: Detail of a wooden shade with an installed bulb.
Figure 4: Detailed view of a light element with both glass and wood shades.
5. Operating Instructions
5.1. Powering On
Once installation is complete, restore power at the circuit breaker or fuse box. The fixture can then be operated using a standard wall switch.
5.2. Dimmable Functionality
This fixture is dimmable. To utilize the dimming feature, ensure you are using dimmable LED bulbs and a compatible LED dimmer switch (sold separately). Follow the dimmer switch manufacturer's instructions for installation and operation.
6. Maintenance
6.1. Cleaning
To clean the fixture, ensure the power is turned off. Wipe the metal, glass, and wood surfaces with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or shades.
6.2. Bulb Replacement
Before replacing bulbs, turn off the power to the fixture at the circuit breaker. Allow bulbs to cool completely. Unscrew the old bulb and replace it with a new E26 Medium base LED bulb, not exceeding 7 watts. Ensure the new bulb is fully seated in the socket.
7. Troubleshooting
If you encounter issues with your pendant light, refer to the table below for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. | Check circuit breaker or fuse. Ensure wall switch is on. |
| Loose wire connections. | Turn off power, check all wire connections in the junction box. | |
| Faulty bulb. | Replace bulb with a known working one. | |
| Light flickers. | Loose bulb or wiring. | Turn off power, tighten bulb. Check wire connections. |
| Incompatible dimmer switch or bulb. | Ensure both bulbs and dimmer are LED compatible. | |
| Fixture hums. | Incompatible dimmer switch. | Replace dimmer with a high-quality LED compatible dimmer. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | 28279DBZAB |
| Brand | Maxim |
| Color | Dark Bronze/Antique Brass |
| Material | Steel, Glass, Wood |
| Style | Transitional, Modern |
| Fixture Type | Pendant Light |
| Indoor/Outdoor Usage | Indoor |
| Power Source | Corded Electric |
| Light Source | LED (Bulbs not included) |
| Number of Light Sources | 16 |
| Voltage | 120 Volts |
| Light Color | Warm White |
| Color Temperature | 3000 Kelvin |
| Wattage (per bulb) | 7 watts (max) |
| Bulb Base | E26 Medium |
| Brightness (Total) | 5800 Lumens |
| Dimmable | Yes (with compatible bulbs and dimmer) |
| Mounting Type | Ceiling Mount, Semi Flush Mount |
| Item Dimensions (L x W x H) | 60.75" x 60.75" x 21.25" |
| Item Weight | 32 Pounds |
| Required Assembly | Yes |
9. Warranty Information
This Maxim Lighting Akimbo Pendant Light is backed by a 1-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific details regarding warranty coverage and claims, please contact Maxim Lighting customer support.
10. Customer Support
If you have any questions, require assistance with installation, or need to report a missing or damaged part, please contact Maxim Lighting customer support. Refer to the contact information provided on the product packaging or the official Maxim Lighting website.