Introduction
This manual provides instructions for the proper installation, use, and maintenance of your YITAHOME 20-22FT Travel Trailer Cover. Please read these instructions carefully before use to ensure optimal performance and longevity of the product.
Image: The YITAHOME 20-22FT Travel Trailer Cover fully installed on a recreational vehicle, demonstrating its protective coverage.
Package Contents
Verify that all components are present in the package:
- 1 x YITAHOME Travel Trailer RV Cover (fits 20-22FT RVs)
- 4 x Tire Covers
- 1 x Storage Bag
- 1 x Tongue Jack Cover
- 6 x Gutter Covers for RV
- 2 x Repair Patches
- 2 x Extra Long Windbreak Straps
- 4 x Side Tension Panels (integrated)
- 3 x Front Tension Panels (integrated)
Important Considerations Before Installation
- Measure Your RV: Confirm your vehicle's length to ensure it falls within the 20-22FT range. Measurement should cover the overall area, including bumpers, spare tires, ladders, and roof equipment. If your RV is between sizes, consider choosing the larger size for a better fit.
- Clear the Area: Ensure the area around your RV is clear of debris or sharp objects that could damage the cover during installation.
- Secure Loose Items: Before covering, secure any loose items on the RV's exterior, such as antennas or awnings, to prevent damage to both the RV and the cover.
- Protect Sharp Edges: Use the provided gutter covers or other padding on any sharp edges or protrusions (e.g., gutters, ladder rungs, antenna bases) to prevent tears in the cover fabric.
Image: A diagram illustrating the different size options for YITAHOME RV covers, highlighting the 20-22FT size and advising to measure the overall vehicle length.
Setup and Installation
- Unpack the Cover: Carefully remove the cover from its storage bag. Unfold it on a clean, flat surface near your RV. Identify the front and rear of the cover.
- Position the Cover: Drape the cover over the top of your RV. It is recommended to have at least two people for this step to prevent the cover from dragging on the ground or catching on sharp edges. Align the front of the cover with the front of your RV.
- Pull Down the Sides: Gently pull the sides of the cover down over the RV. Ensure the cover is evenly distributed and covers all parts of the RV.
- Secure Tension Panels: Locate the 4 side tension panels and 3 front tension panels. Adjust these integrated straps to snug the cover around the RV, preventing excess fabric movement.
- Attach Windbreak Straps: Use the 2 extra long windbreak straps. Pass them underneath the RV and connect them to the corresponding buckles on the opposite side. Tighten these straps to further secure the cover, especially in windy conditions.
- Install Tire Covers: Place the 4 individual tire covers over each of your RV's tires to protect them from UV damage and weathering.
- Install Tongue Jack Cover: Place the tongue jack cover over the RV's tongue jack for protection.
Image: An illustration detailing the windproof straps, tension panels, and elastic hem features designed to secure the RV cover and provide ultimate protection.
Operating Features
Roll-able Zipper Door
The cover features a zippered door on the side, allowing easy access to your RV's interior and engine areas without removing the entire cover. To use:
- Unzip the designated door panel.
- Roll up the unzipped panel and secure it using the integrated fasteners (e.g., Velcro straps) to keep it open.
- After accessing, unroll the panel and zip it closed securely to maintain protection.
Ventilation System
Six air vents are strategically placed on both sides of the cover. These vents are designed to:
- Reduce wind stress on the cover, minimizing flapping and potential damage.
- Promote air circulation to prevent moisture buildup, mold, and mildew inside the cover.
- Facilitate a quick-dry system, allowing the RV to withstand strong winds and heavy rain more effectively.
Image: A detailed view of the RV cover's air vents, roll-able zipper door, and Velcro tape, illustrating features for air circulation and easy access.
Maintenance
- Regular Inspection: Periodically inspect the cover for any signs of wear, tears, or damage, especially after severe weather. Address minor damage promptly using the provided repair patches to prevent further tearing.
- Cleaning: If the cover becomes dirty, clean it with a soft brush or sponge, mild soap, and water. Rinse thoroughly and allow it to air dry completely before folding and storing. Do not use harsh chemicals or abrasive cleaners.
- Storage: When not in use, fold the cover neatly and store it in the provided storage bag in a cool, dry place away from direct sunlight and pests. Ensure the cover is completely dry before storage to prevent mildew.
- Protect from Sharp Objects: Always ensure that any sharp edges or protrusions on your RV are padded or covered before installing the RV cover to prevent tears.
Image: A cutaway view of the multi-layer composite non-woven fabric, highlighting its 5-layer top and 3-layer side construction, along with icons for anti-tear, waterproof, and UV-proof properties.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Cover tears easily | Sharp edges on RV (gutters, ladders, antennas); improper installation causing stress points; extreme weather conditions. | Ensure all sharp edges are padded before installation. Install cover carefully, avoiding excessive pulling. Use repair patches for minor tears. |
| Cover blows off or shifts in wind | Straps not tightened sufficiently; incorrect size cover; extreme wind conditions. | Ensure all tension panels and windbreak straps are securely fastened and tightened. Verify cover size matches RV length. |
| Moisture or mildew under cover | Insufficient air circulation; RV not dry before covering; prolonged high humidity. | Ensure RV is completely dry before covering. The integrated air vents help, but in very humid conditions, occasional uncovering may be beneficial. |
| Difficulty installing cover | Attempting installation alone; cover tangled; incorrect orientation. | Always install with at least two people. Unfold the cover completely and identify front/rear before lifting onto the RV. |
Image: The YITAHOME RV cover securely installed on a travel trailer during a windy day, showcasing its windproof design and straps.
Specifications
- Model: MAYIH1cZLd
- Brand: YITAHOME
- Color: Orange Gray
- Material: Multi-layer composite non-woven fabric (5-layer top, 3-layer sides)
- Vehicle Service Type: Truck (compatible with travel trailers)
- Fit Type: Vehicle Specific Fit (20-22FT Travel Trailers)
- Ultraviolet Light Protection: Yes
- Water Resistance Level: Waterproof
- Item Dimensions (L x W x H): 264 x 105 x 108 inches (670 x 267 x 274 cm)
- Coverage Features: Waterproof, Windproof, Anti-UV, Anti-Tear
- Included Components: RV cover, 4 tire covers, storage bag, tongue jack cover, 6 gutter covers, 2 repair patches, 2 extra long windbreak straps, integrated side and front tension panels.
Warranty Information
This YITAHOME product comes with a manufacturer's warranty. Please refer to the warranty card included in your package or visit the official YITAHOME website for detailed warranty terms and conditions. The warranty typically covers manufacturing defects under normal use.
Customer Support
For any questions, concerns, or assistance with your YITAHOME Travel Trailer Cover, please contact our customer support team. You can find contact information on the YITAHOME official website or through your purchase platform.
When contacting support, please have your product model number (MAYIH1cZLd) and purchase details ready.
