Aeagle Soft Roll-up Truck Bed Tonneau Cover Instruction Manual

1. Product Overview

The Aeagle Soft Roll-up Truck Bed Tonneau Cover is designed to protect your truck bed cargo from weather elements such as rain, sun, dirt, and dust. It features a durable double PVC tarp and a robust frame with three support rods for enhanced stability. The roll-up design provides convenient access to your truck bed when needed.

This cover is engineered for easy installation without the need for drilling or specialized tools, featuring an adjustable tension system for a secure fit.

Image 1.1: Aeagle Soft Roll-up Tonneau Cover on a truck.

2. Compatibility

This tonneau cover is compatible with the following truck models and bed sizes:

• Dodge Ram 1500: 2002-2018
• Ram 2500/3500: 2003-2024
• Ram 1500 Classic: 2019-2023 (Note: Only for CLASSIC BODY style, not for New Body Style)
• Bed Size: Fleetside 6.4 ft (76.8 inches) bed.

Important Compatibility Notes:

• Not compatible with models equipped with Ram Box or Split Tailgate.
• Not compatible with trucks featuring a Headache Rack, Tool Box (over-the-rail or in-bed), or Bedrails that interfere with the cover's mounting.
• Only fits Fleetside/Styleside beds. Will not fit Flareside/Stepside beds.

2.1. Measuring Your Truck Bed Length

To ensure proper fitment, accurately measure your truck bed length. Measure from the inside of the bulkhead (front of the bed, near the cab) to the inside of the tailgate (rear of the bed). The advertised bed length is sometimes rounded from the actual bed length.

Image 2.1: Guide for measuring truck bed length.

Image 2.2: Examples of incompatible truck bed conditions.

Image 2.3: Identifying Fleetside vs. Stepside truck beds.

3. What's in the Box

Your package should contain the following components:

• Soft Roll Up Truck Bed Tonneau Cover assembly
• Installation hardware (clamps, rails, etc.)
• Additional installation manual (if provided separately)

Please inspect all components upon receipt to ensure everything is present and undamaged.

4. Setup and Installation

The Aeagle Soft Roll-up Tonneau Cover is designed for quick and easy installation, typically requiring no drilling or special tools. An additional installation manual may be included for detailed steps.

4.1. Pre-Installation Steps

1. Clean the truck bed rails thoroughly to ensure a good seal and proper clamp adhesion.
2. Unpack all components and lay them out to verify all parts are present.

4.2. Installation Process

While specific steps may vary slightly, the general installation involves:

1. Position the front rail (bulkhead rail) of the tonneau cover assembly at the front of your truck bed, ensuring it is centered and flush.
2. Attach the side rails to the front rail and align them along the truck bed rails.
3. Secure the rails to the truck bed using the provided clamps. Ensure clamps are tightened securely but do not overtighten.
4. Unroll the cover completely towards the tailgate.
5. Adjust the tension of the cover as needed to achieve a perfect, wrinkle-free fit. This typically involves adjusting tension control systems located at the rear of the cover.
6. Secure the cover at the tailgate end using the integrated latching mechanism.

For detailed visual instructions, refer to any included supplementary manuals or online resources provided by Aeagle.

Image 4.1: Key features for installation and durability.

5. Operating Instructions

The roll-up design allows for convenient access to your truck bed.

5.1. Opening the Cover

1. Release the latches located at the tailgate end of the cover.
2. Begin rolling the cover towards the cab of the truck.
3. Once fully rolled, secure the cover using the integrated straps or buckles to prevent it from unrolling during transit.

5.2. Closing the Cover

1. Release the securing straps/buckles.
2. Carefully unroll the cover towards the tailgate, ensuring it lays flat and evenly across the truck bed.
3. Engage the latches at the tailgate end to secure the cover in place.

Image 5.1: Soft roll-up cover operation.

6. Maintenance

Regular maintenance will extend the life and performance of your tonneau cover.

• Cleaning: Clean the cover regularly with mild soap and water. Avoid harsh chemicals or abrasive cleaners that could damage the PVC material. Rinse thoroughly and allow to air dry.
• Rail Cleaning: Periodically clean the side rails and the Velcro strips (if applicable) to remove dirt and debris that can affect sealing and operation.
• Tension Check: Periodically check the cover's tension. If the cover appears loose or wrinkled, adjust the tension system to ensure a snug fit. Proper tension helps maintain weather resistance and prevents flapping during driving.
• Hardware Inspection: Annually inspect all clamps, bolts, and latches for tightness. Tighten any loose hardware to ensure the cover remains securely attached.

Image 6.1: Durable construction features for longevity.

Image 6.2: Weather protection features of the cover.

7. Troubleshooting

If you encounter issues with your tonneau cover, refer to the following common problems and solutions:

7.1. Cover Not Sealing Properly / Leaks

• Check Tension: Ensure the cover tension is correctly adjusted. A loose cover may not seal tightly.
• Inspect Seals: Examine the rubberized waterproof strips along the rails and at the bulkhead for any damage, gaps, or debris. Clean or reposition as necessary.
• Rail Alignment: Verify that the side rails are properly aligned and clamped securely to the truck bed. Misaligned rails can create gaps.
• Tailgate Seal: Ensure the tailgate is closing properly against the cover's seal.

7.2. Cover Flapping While Driving

• Adjust Tension: This is typically caused by insufficient tension. Adjust the tension control system to make the cover tighter.
• Secure Latches: Ensure all latches at the tailgate end are fully engaged and secure.

7.3. Difficulty Rolling/Unrolling

• Clear Obstructions: Check for any debris or objects on the rails or cover that might impede movement.
• Lubricate: If the rolling mechanism feels stiff, a silicone-based lubricant can be applied to the moving parts (avoiding the cover fabric itself).

7.4. Velcro Coming Loose (if applicable)

• Clean Velcro: Dirt and debris can reduce Velcro effectiveness. Clean both sides of the Velcro strips.
• Check for Wear: If the Velcro is old and worn, it may need replacement.

8. Specifications

9. Warranty and Support

9.1. Manufacturer's Warranty

Aeagle offers a manufacturer warranty for 1 year from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

9.2. Customer Support

For any questions, concerns, or warranty claims, please contact Aeagle customer support through the retailer where the product was purchased or visit the official Aeagle store page:

Aeagle Official Store