ZURU SMASHERS 74114B

ZURU SMASHERS Dino Island Mini T-Rex Battles Playset Instruction Manual

Model: 74114B | Brand: ZURU SMASHERS

Introduction

Welcome to the world of ZURU SMASHERS Dino Island! This manual provides essential information for the assembly, operation, and care of your Mini T-Rex Battles Playset. Please read all instructions carefully before beginning to ensure a safe and enjoyable experience.

Important Safety Information:

  • CHOKING HAZARD – Small parts. Not for children under 3 years.
  • Adult supervision is recommended during play, especially during initial setup and handling of materials like slime and sand.
Smashers Dino Island Mini T-Rex Battles Playset packaging, showing a T-Rex skull with an eyeball and small battling dinosaurs.

The Smashers Dino Island Mini T-Rex Battles Playset in its packaging.

What's Included

Your ZURU SMASHERS Dino Island Mini T-Rex Battles Playset contains the following components:

  • 1 x Smashers Skull (outer packaging)
  • 2 x Battling Dinos (unassembled parts)
  • 2 x Mini Characters
  • 1 x Eyeball (for firing)
  • 1 x Map (Collector's Guide)
  • 2 x Slime packets
  • 1 x Sand packet
  • 1 x Foam packet
  • 2 x Smash Eggs
  • 1 x Smash Egg Rebuilder
  • 1 x Instruction Sheet
  • 1 x Collector's Guide

Setup Instructions

Follow these steps to unbox your surprises and assemble your battling dinosaurs:

  1. Unbox the Smashers Skull: Carefully open the large T-Rex skull packaging to reveal the hidden contents.
  2. Dig for Dino Parts: Inside the skull, you will find various materials such as slime, sand, and foam. Dig through these materials to locate all the pieces for your two battling dinosaurs.
Three panels showing the Smash, Build, and Battle process. First, a child holding the Smashers skull. Second, hands extracting blue dinosaur parts from green slime and blue foam. Third, two children playing with assembled dinosaurs.

The process of smashing, building, and battling with the playset.

  1. Assemble Your Dinos: Once all parts are found, carefully connect the pieces to construct your two battling dinosaurs. Refer to the included instruction sheet or collector's guide for specific assembly diagrams if needed. Note: Some parts may require firm pressure to snap into place.
  2. Prepare Mini Smash Eggs: Locate the two mini Smash Eggs. These contain additional collectible characters.
Hands pulling green slime from a blue dinosaur head, and another hand placing a blue dinosaur part into blue foam.

Extracting dinosaur parts from the sensory materials.

Operating Instructions

Engage in exciting dino battles and discover hidden surprises:

  1. Smash Mini Eggs: To reveal the mini collectible characters, smash the small Smash Eggs. You can use the included Smash Egg Rebuilder to put them back together for repeated smashing fun.
  2. Prepare for Battle: Place the assembled battling dinosaurs on a flat surface, facing each other.
  3. Load the Eyeball: Secure the light-up eyeball into the mouth of one of your battling dinosaurs.
A red dinosaur toy with a white eyeball loaded into its mouth, ready to be fired.

Loading the eyeball into the dinosaur's mouth.

  1. Initiate Battle: Pull the tail trigger on the dinosaur to launch the eyeball towards the opposing dinosaur. The goal is to hit and 'smash' the other dinosaur.
A red dinosaur and a blue dinosaur facing each other, with a white eyeball in mid-air between them, indicating a battle.

The battling dinosaurs engaging in play.

Maintenance

To ensure the longevity of your playset and its components:

  • Cleaning: Wipe plastic dinosaur figures with a damp cloth as needed. Avoid harsh chemicals.
  • Slime, Sand, and Foam: Store these materials in airtight containers after play to prevent them from drying out. If they become slightly dry, a small amount of water can sometimes help restore their texture, but this is not guaranteed.
  • Storage: Keep all components in a clean, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

Here are solutions to common issues you might encounter:

  • Difficulty Assembling Dinosaurs: Some parts may require significant force to snap into place. Ensure parts are correctly aligned before applying pressure. If a part seems stuck, try wiggling it gently while applying pressure. Adult assistance may be required.
  • Dried Out Slime/Sand/Foam: If these materials have dried out, their original texture may be difficult to restore. For slightly dry materials, try adding a very small amount of water and kneading. For severely dried materials, replacement may be necessary. Store materials in sealed containers after each use to prevent drying.
  • Eyeball Not Firing Correctly: Ensure the eyeball is properly seated in the dinosaur's mouth mechanism. Check that the tail trigger moves freely and is not obstructed.

Specifications

BrandZURU SMASHERS
Model Number74114B
UPC193052065605
Recommended Age Range3 to 15 years (36 to 180 months)
Material TypePlastic
Item Dimensions (L x W x H)10.87 x 7.17 x 7.87 inches
Assembly RequiredYes
Number of Pieces4 (referring to main dino figures)

Safety Information

Please observe the following safety guidelines:

  • This product contains small parts and is not suitable for children under 3 years of age due to choking hazards.
  • Always play in a clear area to avoid tripping hazards.
  • Do not aim the firing eyeball at eyes or face.
  • Keep all packaging materials away from children to prevent suffocation.
  • Wash hands thoroughly after handling slime, sand, and foam.

© 2023 ZURU SMASHERS. All rights reserved.