Introduction
This manual provides essential information for the safe and effective installation, operation, and maintenance of your ISUERFY 200W LED Flood Light. Please read these instructions thoroughly before use and retain them for future reference.
Important Safety Information
- Direct Light Exposure: WARNING: Before turning on these lights, avoid looking directly at them. The high intensity of the LED light can cause temporary vision impairment or discomfort.
- Electrical Safety: Ensure the power supply is disconnected before any installation, maintenance, or cleaning. Use only with AC 100-120V power sources.
- Installation: Installation should be performed by a qualified electrician if you are unsure about electrical wiring. Ensure all connections are secure and properly insulated.
- Mounting: Mount the fixture securely to a stable surface capable of supporting its weight.
- Operating Temperature: Do not operate the light in environments exceeding its specified temperature range.
- Damage: Do not use the product if the power cord, plug, or fixture is damaged. Contact customer support for assistance.
Product Overview
The ISUERFY 200W LED Flood Light is designed for powerful and efficient outdoor and indoor illumination. It features a robust construction and high-brightness LEDs, suitable for various applications.
Key Features
- Ultra-Bright Illumination: 200W power with 266 high-quality LEDs producing 24000 lumens of 5000K daylight white light.
- Wide Beam Angle: 120° wide beam for extensive area coverage.
- Plug-and-Play Design: Equipped with a standard US plug and a 10ft power cord for easy setup without complex wiring.
- Durable and Waterproof: IP66 rated for outdoor use, resistant to rain, frost, and heat. Constructed with thick aluminum and tempered glass.
- Efficient Heat Dissipation: Heavy-duty die-cast aluminum housing with a fin-type heat sink design ensures optimal heat management and extends LED lifespan.
- Adjustable Bracket: 180° adjustable bracket for flexible mounting on walls, ceilings, or stands.
Package Contents
- ISUERFY 200W LED Flood Light (2 units)
- Integrated 10ft Power Cord with US Plug (2 units)
- Adjustable Mounting Bracket (2 units)
Image: Two ISUERFY 200W LED Flood Lights, showcasing the integrated 10ft power cord and the IP66 rating.
Installation Instructions
Follow these steps for proper installation of your flood light. Ensure all safety precautions are observed.
Mounting Options
The flood light features a 180° adjustable bracket, allowing for versatile installation.
- Wall Mounting: Secure the bracket to a sturdy wall surface using appropriate fasteners (not included). Adjust the light angle as needed.
- Ceiling Mounting: Attach the bracket to a ceiling or overhead structure. Ensure the mounting surface can support the light's weight.
- Stand Mounting: The light can be placed on a flat surface or attached to a compatible stand (not included) for temporary or portable use.
Image: Detailed diagram illustrating the product dimensions, 10ft power cable, 180° adjustable bracket, and various mounting methods (ceiling, wall, floor).
Electrical Connection
This flood light is designed for simple plug-and-play operation.
- After securely mounting the light, ensure the power outlet is easily accessible.
- Plug the 10ft power cord into a standard AC 100-120V electrical outlet.
- Verify that the connection is firm and the cord is not pinched or damaged.
Image: The flood light used as a work light in a garage, highlighting the convenience of the 10ft power cord.
Operating Instructions
The ISUERFY 200W LED Flood Light operates directly when plugged into a power source. It does not include a dusk-to-dawn sensor, motion sensor, or remote control.
- Once installed and plugged in, the light will turn on.
- To turn off the light, unplug it from the power outlet or use an external switch connected to the outlet.
- Adjust the angle of the flood light using the 180° adjustable bracket to direct illumination as required.
Maintenance
Regular maintenance ensures optimal performance and longevity of your flood light.
- Cleaning: Disconnect power before cleaning. Wipe the glass lens and housing with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Inspection: Periodically inspect the power cord and plug for any signs of damage. Check the mounting bracket for tightness.
- Environmental Protection: Although IP66 rated, avoid submerging the light in water. Ensure proper drainage around the installation area if possible.
Troubleshooting
If you encounter issues with your flood light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the outlet. Loose connection. Damaged cord/plug. | Check the power outlet with another device. Ensure the plug is fully inserted. Inspect cord for damage; do not use if damaged. |
| Light flickers. | Unstable power supply. Loose connection. | Ensure stable power. Check plug connection. |
| Reduced brightness. | Dirty lens. Aging LEDs. | Clean the glass lens. LEDs have a long lifespan, but gradual degradation can occur over many years. |
Specifications
| Brand | ISUERFY |
| Model Number | SUER-FL200W-5000K-2 |
| Wattage | 200 Watts |
| Brightness | 24000 Lumens |
| Color Temperature | 5000 Kelvin (Daylight White) |
| Beam Angle | 120° |
| Input Voltage | 100-120V AC |
| Power Source | Corded Electric (10ft cable with US plug) |
| Water Resistance Level | IP66 Waterproof |
| Material | Aluminum, Tempered Glass |
| Product Dimensions | 14.5"L x 1.5"W x 11"H |
| Item Weight | 8.25 pounds (per unit) |
| Installation Type | Wall Mount (with adjustable bracket) |
| Special Features | Energy Efficient, Waterproof |
Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact ISUERFY customer service directly. Details for contacting support are typically provided with your purchase or on the manufacturer's official website.