1. Product Overview
Thank you for choosing the ODUSE-DAILY Green Velvet Dining Chairs. This set of four elegant dining chairs is designed to provide both comfort and style to your kitchen or dining room. Featuring a luxurious velvet upholstery in olive green, tufted backrests, and sturdy wood legs, these chairs are built for durability and aesthetic appeal. Each chair includes thoughtful details such as decorative nailhead trim and a convenient pull ring on the back.
Image 1.1: The ODUSE-DAILY Green Velvet Dining Chairs (Set of 4).
2. Important Safety Information
Please read all instructions carefully before assembly and use. Retain this manual for future reference.
- Ensure the chair is properly assembled according to the instructions provided.
- Do not exceed the maximum weight capacity of 300 pounds (136 kg) per chair. Exceeding this limit may result in injury or damage to the product.
- Improper use or assembly may result in injury or damage to the product.
- Keep small parts away from children during assembly to prevent choking hazards.
- Periodically check all bolts and connections to ensure they remain tight. Retighten if necessary.
3. Package Contents
Before beginning assembly, verify that all parts are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Dining Chair Seat with Backrest (4 units)
- Front Legs (4 pairs, 8 units total)
- Back Legs (4 pairs, 8 units total)
- Hardware Pack (bolts, washers, Allen wrench) - typically found zippered inside the seat cushion.
Image 3.1: Detail of chair components, including legs and decorative elements.
4. Assembly Instructions
Assembly is straightforward and typically takes about 40 minutes for a set of four chairs. No additional tools are required beyond the included Allen wrench.
- Unpack Components: Carefully remove all parts from the packaging. Locate the hardware pack, which is usually zippered inside the seat cushion of one of the chairs.
- Attach Legs to Seat: Align the pre-drilled holes on the chair legs with the corresponding holes on the underside of the chair seat. Ensure the front legs (often with adjustable caps) are positioned correctly at the front, and the back legs at the back.
- Secure with Bolts: Insert the provided bolts with washers into the holes and tighten them using the included Allen wrench. Do not overtighten initially; leave them slightly loose to allow for minor adjustments.
- Final Tightening: Once all legs are attached to a chair, place the chair upright on a flat surface. Gently press down on the seat to ensure all legs are evenly touching the floor. Then, fully tighten all bolts. This helps prevent wobbling.
- Repeat for Remaining Chairs: Follow the same steps for the other three chairs.
Image 4.1: Chair dimensions, useful for assembly and placement.
5. Operating and Usage
These dining chairs are designed for indoor use in dining rooms, kitchens, or similar settings. They provide comfortable seating for meals and gatherings.
- Use the chairs on a flat, stable surface to ensure stability and prevent tipping.
- The ergonomic design with high-density foam and serpentine springs provides comfortable support.
- The decorative pull ring on the backrest can be used to easily pull the chair out from under a table.
Image 5.1: Chairs in a typical dining room setup.
6. Maintenance and Care
Proper care will extend the life and appearance of your dining chairs.
- Cleaning: Wipe clean with a soft, damp cloth. For velvet upholstery, use a fabric cleaner specifically designed for velvet, following the product's instructions. Avoid harsh chemicals or abrasive cleaners.
- Spills: Blot spills immediately with a clean, dry cloth. Do not rub, as this can spread the stain.
- Dusting: Regularly dust the chairs with a soft brush or vacuum cleaner with an upholstery attachment to prevent dust buildup in the velvet fibers.
- Legs: Periodically check the tightness of the leg bolts and retighten if necessary to maintain stability.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair wobbles after assembly. | Legs not tightened evenly or fully. | Place the chair on a flat surface. Loosen all leg bolts slightly, then press down on the seat to ensure all legs touch the floor. Retighten all bolts firmly. Check the adjustable caps on the front legs and adjust if needed. |
| Missing parts or hardware. | Packaging error or parts overlooked. | Double-check all packaging materials, especially inside the seat cushion's zippered compartment. If still missing, contact ODUSE-DAILY customer support with your purchase details. |
| Fabric appears creased or flattened. | Packaging compression or normal use. | Lightly brush the velvet in one direction with a soft brush. For stubborn creases, a garment steamer can be used carefully from a distance, ensuring not to saturate the fabric. |
8. Specifications
| Feature | Detail |
|---|---|
| Model | G-1 Olive Velvet, Wood Legs |
| Material | Velvet (Textile) upholstery, Rubber Wood Legs |
| Frame Material | Solid Wood Frame |
| Dimensions (Overall) | 24.4"D x 19.7"W x 37.5"H (62 cm D x 50 cm W x 95.25 cm H) |
| Seat Height | 19" ± 1" H (48.26 cm ± 2.54 cm H) |
| Seat Size | 17.3"D x 19.7"W (43.94 cm D x 50 cm W) |
| Back Size | 19.7"W x 20"H (50 cm W x 50.8 cm H) |
| Item Weight (per chair) | 16.3 pounds (7.39 kg) |
| Weight Capacity (per chair) | 300 pounds (136 kg) |
| Special Features | Pull Ring, Button Tufted Design, Nailhead Trim, Adjustable Front Leg Caps |
| Manufacturer | ODUSE-DAILY |
9. Warranty and Support
ODUSE-DAILY is committed to providing high-quality products and customer satisfaction. For any questions, concerns, or assistance with your dining chairs, please contact ODUSE-DAILY customer support.
- Returns: This product is eligible for a 30-day easy return policy. Please refer to your purchase platform's return guidelines for detailed information.
- Customer Support: For direct assistance, visit the ODUSE-DAILY Store on Amazon or contact the seller through your order history.
- Protection Plans: Extended protection plans may be available for purchase. Check your product listing for details.