Bernzomatic Corporation 426329

Bernzomatic 5.6 oz Butane Cylinder User Manual

Model: 426329

Introduction

This manual provides essential information for the safe and effective use of the Bernzomatic 5.6 oz Butane Cylinder. This cylinder is designed for refilling Bernzomatic micro torches, lighters, cordless soldering irons, and other butane-powered devices. It features a universal fueling tip for convenient and easy refilling. Butane fuel, when ignited in air, can reach a flame temperature of 3,150 degrees Fahrenheit.

Bernzomatic 5.6 oz Butane Cylinder

Figure 1: The Bernzomatic 5.6 oz Butane Cylinder. This image displays the black and blue cylinder with the Bernzomatic logo, product name "BUTANE", and various safety warnings including "EXTREME DANGER" and "VERY FLAMMABLE CONTENTS UNDER PRESSURE". It also indicates "UNIVERSAL FUELING TIP" and the weight "5.6 oz. / 160 g".

Important Safety Warnings

FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY, DEATH, OR PROPERTY DAMAGE.

Refer to the product label for additional warnings and instructions.

Setup

1. Unpacking

Remove the Bernzomatic Butane Cylinder from its packaging. Inspect the cylinder for any signs of damage before use. Do not use if the cylinder appears damaged or compromised.

2. Preparing for Use

  1. Ensure the area is well-ventilated and free from ignition sources (e.g., open flames, pilot lights, sparks, electrical appliances).
  2. Confirm that the device you intend to refill is compatible with butane fuel and has a universal fueling port.
  3. Read the instructions for your specific butane-powered device before attempting to refill.

Operating Instructions: Refilling Devices

The Bernzomatic Butane Cylinder is designed for easy refilling of compatible devices using its universal fueling tip.

  1. Prepare the Device: Ensure the device to be refilled is turned off and cooled down. If applicable, purge any residual air from the device's fuel tank by pressing the refill valve with a small tool until no more gas escapes.
  2. Position the Cylinder: Hold the Bernzomatic Butane Cylinder upside down, with the universal fueling tip pointing downwards.
  3. Align and Insert: Align the fueling tip of the butane cylinder with the refill valve on your device. Insert the tip firmly into the valve.
  4. Refill: Press down on the cylinder for 5-10 seconds. You may hear a hissing sound and see a small amount of liquid butane escape, which is normal. Repeat this process 2-3 times, allowing a few seconds between each press, until the device's fuel tank is full or no more butane enters.
  5. Remove and Check: Carefully remove the butane cylinder from the device. Wipe away any excess butane that may have escaped.
  6. Wait Before Use: Allow the refilled device to sit for at least 5 minutes before attempting to ignite it. This allows the butane to stabilize and reach room temperature.

Always perform refilling in a well-ventilated area, away from any ignition sources.

Maintenance and Storage

Storage

Disposal

Do not dispose of partially filled or empty cylinders in household trash. Consult your local waste management authority for proper disposal instructions for pressurized gas cylinders. Do not puncture, incinerate, or expose to extreme heat.

Troubleshooting

ProblemPossible CauseSolution
Device not refilling or refilling slowly.Air trapped in the device's fuel tank; improper alignment of fueling tip; device not compatible.Purge air from the device's tank before refilling. Ensure the fueling tip is firmly and correctly inserted. Verify device compatibility.
Excessive butane leakage during refill.Improper alignment; worn device refill valve; overfilling.Ensure firm and correct insertion of the fueling tip. Do not overfill. If leakage persists, the device's valve may be faulty.
Device not igniting after refill.Insufficient waiting time after refill; air in the tank; faulty ignition system on device.Allow 5 minutes for butane to stabilize. Purge air from the device. Consult your device's manual for ignition troubleshooting.

Specifications

AttributeDetail
BrandBernzomatic Corporation
Model Number426329 (BF56)
Item Weight8.5 ounces
Product Dimensions12 x 6 x 4 inches
MaterialOther (Cylinder material)
Item Package Quantity1
Universal Fuel TipYes
Flame Temperature (in air)3,150 degrees Fahrenheit
ASINB0CFB2C8LM
Date First AvailableApril 23, 2022

Warranty and Support

For information regarding product warranty, technical support, or customer service, please contact Bernzomatic Corporation directly. Refer to the official Bernzomatic website or product packaging for the most current contact information and warranty details.

Bernzomatic Corporation
www.bernzomatic.com

Related Documents - 426329

PreviewBernzomatic ST2200 Butane Microtorch Instruction Manual
Comprehensive safety warnings, operating instructions, refilling procedures, and storage guidelines for the Bernzomatic ST2200 Butane Microtorch.
PreviewBernzomatic ST2200 Butane Microtorch Instruction Manual & Safety Guide
Comprehensive instruction manual and safety guide for the Bernzomatic ST2200 Butane Microtorch. Learn about operation, refilling, safety warnings, and storage.
PreviewBernzomatic ST2000 Butane Torch User Manual and Safety Guide
Comprehensive instructions and safety warnings for the Bernzomatic ST2000 butane torch, covering operation, refilling, storage, and potential hazards. Includes multilingual safety information.
PreviewBernzomatic 3301 Handheld Torch Instruction Manual and Safety Guide
Comprehensive instruction manual and safety guide for the Bernzomatic 3301 handheld propane torch. Learn about assembly, operation, safety warnings, and storage to ensure safe and effective use.
PreviewPrimo Flavorstation 100 User Manual: Create Sparkling Beverages at Home
Comprehensive user manual for the Primo Flavorstation 100 Home Beverage Maker. Learn how to set up, use, maintain, and troubleshoot your soda maker, including safety precautions and recipes.
PreviewJUKI MF-7800 Series Parts List: High-Speed Coverstitch Machine Components
This document provides a comprehensive parts list for the JUKI MF-7800 Series high-speed, cylinder-bed coverstitch machine. It details individual components, assembly parts, and reference numbers essential for maintenance, repair, and identification of parts for industrial sewing equipment.