SICOTAS NIEWA10002

SICOTAS Rattan Nightstand (Model NIEWA10002) - Assembly and Care Manual

Model: NIEWA10002 | Brand: SICOTAS

Introduction

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your SICOTAS Rattan Nightstand. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Important Safety Note: Assembly required. Handle with care to avoid injury.

Parts List

Before assembly, verify that all components are present and undamaged. Refer to the included hardware pack for specific part identifiers.

Exploded view of nightstand parts with dimensions

Image Description: An exploded diagram showing all individual components of the SICOTAS Rattan Nightstand, including the top panel, side panels, bottom shelf, drawer components, and hardware. Key dimensions are overlaid, indicating a width of 19.7 inches (50cm), depth of 15 inches (38cm), and height of 25.2 inches (64cm). The drawer itself measures 16.3 inches (41.5cm) in width and 8.1 inches (20.5cm) in height.

Components typically include:

  • Top Panel (1)
  • Side Panels (2)
  • Bottom Shelf (1)
  • Back Panel (1)
  • Drawer Front with Rattan Pattern (1)
  • Drawer Sides (2)
  • Drawer Back (1)
  • Drawer Bottom (1)
  • Drawer Handle (1)
  • Legs/Base Supports (4)

Hardware typically includes:

  • Screws of various sizes
  • Dowel pins
  • Cam locks and cam studs
  • Drawer slides
  • Allen wrench (if required)
  • Soft footpads

Setup and Assembly

Tools recommended for assembly: Screwdriver. An electric drill may expedite the process but use with caution to avoid overtightening.

  1. Unpack and Identify: Carefully unpack all components and hardware. Lay them out on a clean, soft surface to prevent scratches. Compare against the parts list to ensure everything is present.
  2. Assemble the Frame: Attach the side panels to the top panel and bottom shelf using the provided screws and dowel pins. Ensure all connections are secure.
  3. Install Back Panel: Secure the back panel to the assembled frame. This enhances stability.
  4. Assemble the Drawer: Connect the drawer sides, back, and front panel. Insert the drawer bottom. Attach the drawer handle to the front panel.
  5. Install Drawer Slides: Attach the drawer slides to both the drawer and the interior of the nightstand frame according to the instructions. Ensure they are aligned for smooth operation.
  6. Insert Drawer: Carefully slide the assembled drawer into the nightstand frame.
  7. Attach Footpads: Apply the soft footpads to the bottom of the legs to protect your floor.
  8. Final Check: Ensure all screws are tightened and the nightstand is stable.
Two assembled SICOTAS Rattan Nightstands in a bedroom setting

Image Description: Two fully assembled SICOTAS Rattan Nightstands, one on each side of a bed. The nightstands feature a light oak finish, a single drawer with a rattan-patterned front, and an open storage shelf below. One nightstand is adorned with a lamp, a small picture frame, and a decorative sphere, while the other holds a cup, a small plant, and a woven basket.

Operating Instructions

The SICOTAS Rattan Nightstand is designed for convenient storage and display in various indoor settings.

  • Drawer Use: The single drawer provides enclosed storage for personal items. Pull the gold knob to open and push to close. The drawer slides are designed for smooth operation.
  • Open Shelf Use: The open shelf below the drawer is ideal for storing books, decorative baskets, or other frequently accessed items.
  • Top Surface: The top surface can be used to place lamps, alarm clocks, beverages, or other bedside essentials.
Close-up of the nightstand drawer open, showing items inside and the gold knob

Image Description: A close-up view of the SICOTAS Rattan Nightstand with its drawer partially open. The drawer contains a book and two small decorative candles. The gold-colored handle is visible on the drawer front, which features a woven rattan-like texture. The open shelf below is empty.

Care and Maintenance

Proper care will ensure the longevity and appearance of your nightstand.

  • Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, as these can damage the finish.
  • Spills: The tabletop is water-resistant. Promptly wipe up any spills to prevent water damage or staining.
  • Stability: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
  • Protection: Use coasters under beverages and felt pads under decorative items to prevent scratches on the top surface.
  • Rattan Pattern: The rattan pattern is made from plastic and requires no special maintenance beyond general cleaning.
Close-up showing water droplets on the nightstand's surface being wiped away with a cloth

Image Description: A hand wiping water droplets from the light oak surface of the nightstand with a white cloth, demonstrating its water-resistant tabletop feature.

Troubleshooting

ProblemPossible CauseSolution
Nightstand is wobblyLoose screws or uneven floor.Check and tighten all assembly screws. Ensure the nightstand is on a level surface. Adjust footpads if necessary.
Drawer does not slide smoothlyDrawer slides are misaligned or obstructed.Remove the drawer and inspect the slides for any obstructions. Realign the slides if they appear crooked. Ensure all screws securing the slides are tight.
Missing parts during assemblyPackaging error or parts overlooked.Carefully re-check all packaging materials. If parts are still missing, contact SICOTAS customer support.

Specifications

BrandSICOTAS
Model NumberNIEWA10002
Product Dimensions (D x W x H)15"D x 19.7"W x 25.2"H
Item Weight50 Pounds
Maximum Weight Recommendation66 Pounds
Material TypeEngineered Wood
Furniture FinishOak
ColorReclaimed Light Oak
Number of Drawers1
Number of Shelves1
Tools Recommended For AssemblyScrew Driver

Warranty Information

Specific warranty details are typically provided with your purchase documentation. Please refer to the warranty card or contact SICOTAS customer support for information regarding coverage and terms.

Protection plans are available for purchase separately, offering extended coverage beyond the standard manufacturer's warranty. Examples include 2-Year and 3-Year Protection Plans.

Customer Support

For assistance with assembly, missing parts, or any other inquiries, please contact SICOTAS customer support.

You can often find support contact information on the manufacturer's website or through your purchase platform.

Online Resources: Visit the SICOTAS Store on Amazon

Related Documents - NIEWA10002

Preview SICOTAS NIEWA10002 Nightstand Assembly Instructions
Comprehensive assembly instructions for the SICOTAS NIEWA10002 nightstand. This guide details general assembly guidelines, a complete parts list, hardware list, and step-by-step instructions with textual descriptions of diagrams to help you build your nightstand.
Preview Sicotas NIEWA10010GY Night Stand Assembly Instructions
Step-by-step assembly guide for the Sicotas NIEWA10010GY night stand, including parts list, hardware list, and general assembly guidelines for proper setup.
Preview Sicotas SCEWA100040A Cabinet Assembly Instructions
Comprehensive assembly instructions for the Sicotas SCEWA100040A cabinet. This guide includes a detailed parts list, hardware specifications, step-by-step assembly procedures, and final dimensions to help you build your furniture.
Preview SICOTAS Zura Collection Nightstand Assembly Instructions & Parts List
Comprehensive assembly instructions for the SICOTAS Zura Collection nightstand, including parts list, hardware details, step-by-step guidance, and customer support information. Model numbers: ND129A1XLTY1693, ND129A1XBNY1694, ND129A2XLTY1696, ND129A2XBNY1697.
Preview Sicotas Nightstand Assembly Instructions
Assembly instructions for Sicotas nightstands, including general guidelines, parts list, hardware list, and step-by-step assembly procedures.
Preview SICOTAS NIEWA10016BK/GY Side Table Assembly Instructions
Comprehensive assembly guide for the SICOTAS NIEWA10016BK and NIEWA10016GY side tables. Includes parts list, hardware list, and step-by-step instructions for easy setup.