Joy Pebble R5315 Space Heater User Manual

Important Safety Instructions

Please read and understand all instructions before using this heater. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Do not use this heater outdoors. It is designed for indoor use only.
• Do not use in bathrooms, laundry areas, or similar indoor locations where water may be present.
• Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
• This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
• Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
• Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
• Always unplug heater when not in use.
• Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner.
• Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
• To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
• This heater has an automatic tip-over safety switch and overheat protection. If the heater tips over or overheats, it will automatically shut off.

Product Overview

The Joy Pebble R5315 is a compact and efficient radiant space heater designed for personal use in various indoor settings. It features two heat levels, oscillation, and multiple safety mechanisms.

Key Features:

• Dual-Gear Heating: Select between 400W (Low) and 800W (High) power settings for customized warmth.
• Rapid Heating: Experience warmth within 1 second of activation.
• Oscillation: Wide-angle 65° oscillation distributes heat evenly across a 161 sq. ft. area.
• Adjustable Tilt: The head can be tilted approximately 10 degrees for flexible heat direction.
• Safety Features: Equipped with tip-over protection and overheat protection, ETL safety certified.
• Timer Function: Integrated 180-minute timer for automatic shut-off.
• Portable Design: Lightweight (3.96 lbs) with a convenient hidden carrying handle.
• Quiet Operation: Operates silently, suitable for use while working or sleeping.

Figure 1: The heater highlighting its 400W (low) and 800W (high) heating gears for instant warmth.

Figure 2: Overview of the heater's portable design, including the temperature control knob, timer knob, and convenient hidden carry handle.

Setup

The Joy Pebble R5315 Space Heater requires minimal setup. Simply remove it from its packaging and place it on a stable, flat surface.

1. Unpack the heater and all its components.
2. Place the heater on a firm, level surface, ensuring it is at least 3 feet (0.9 m) away from any walls, furniture, or other combustible materials.
3. Ensure the power cord is not obstructed or placed under rugs or carpeting.
4. Plug the power cord directly into a 120V AC, 60Hz electrical outlet. Do not use extension cords or power strips.

Operating Instructions

Control Panel:

The heater features two rotary knobs on its base for easy operation:

• Left Knob: Timer Function (OFF, 30, 60, 90, 120, 150, 180 minutes)
• Right Knob: Power/Heat Settings (OFF, I (400W), II (800W), I with oscillation, II with oscillation)

Power On/Off:

1. To turn on the heater, rotate the Right Knob from 'OFF' to either 'I' (400W) or 'II' (800W) for fixed heating, or to the oscillation settings for oscillating heat.
2. To turn off the heater, rotate the Right Knob back to 'OFF'.

Heat Settings:

• Setting I (400W): Provides a lower heat output, ideal for smaller spaces or maintaining warmth.
• Setting II (800W): Provides a higher heat output for faster and more intense warming.

Oscillation Function:

• To activate oscillation, turn the Right Knob to either the 'I' with oscillation or 'II' with oscillation setting. The heater will rotate up to 65 degrees to distribute heat.
• To stop oscillation, turn the Right Knob back to a non-oscillating heat setting (I or II) or 'OFF'.

Figure 3: Illustration of the heater's fixed and 65° wide-angle oscillating heating modes, along with adjustable head tilt.

Timer Function:

1. To set the timer, rotate the Left Knob to your desired duration (30, 60, 90, 120, 150, or 180 minutes).
2. The heater will operate for the set time and then automatically shut off.
3. To override the timer or turn off manually, rotate the Left Knob to 'OFF' or the Right Knob to 'OFF'.

Adjustable Tilt:

Gently adjust the heater head up or down to direct the radiant heat. The head can tilt approximately 10 degrees.

Safety Features in Action:

Figure 4: The heater's intelligent safety features, including tip-over protection, overheat protection, and ETL certification, ensuring safe operation.

The heater is equipped with a safety switch on its base. If the heater is accidentally tipped over, this switch will disengage, and the heater will automatically power off. It will resume operation once placed upright again. Additionally, an internal sensor monitors the heater's temperature, automatically shutting it off if it reaches an unsafe level (e.g., 221°F) to prevent overheating.

Maintenance

Proper maintenance ensures the longevity and safe operation of your heater.

Cleaning:

• Always unplug the heater and allow it to cool completely before cleaning.
• Use a soft, damp cloth to wipe the exterior surfaces of the heater.
• Do not use abrasive cleaners or solvents as they may damage the surface.
• Do not immerse the heater in water or allow water to drip into the interior.
• Use a vacuum cleaner with a brush attachment to gently remove dust from the heating elements and air vents.

Storage:

• Store the heater in a cool, dry place when not in use.
• To prevent damage, coil the power cord loosely and secure it with a tie.
• Keep the heater in its original packaging or a suitable container to protect it from dust and damage.

Troubleshooting

If your heater is not operating correctly, please refer to the following common issues and solutions:

If the problem persists after trying these solutions, please contact customer support.

Specifications

Warranty and Support

For warranty information or customer support, please refer to the documentation included with your product or visit the official Joy Pebble website. Keep your purchase receipt for warranty claims.