Product Overview
This manual provides essential information for the installation, operation, and maintenance of your new WYWY.Wide Upgraded Dust Bin. This replacement canister is designed for enhanced durability and ease of use, serving as a compatible alternative for Dyson V11, V15, SV14, SV15, and SV22 vacuum cleaner models. It features an upgraded design for improved functionality and longevity.
Image: The WYWY.Wide Upgraded Dust Bin, showing its clear canister and red internal components, with an "UPGRADE" arrow indicating improved design.
Setup and Compatibility
Before installation, ensure your Dyson vacuum cleaner model is compatible with this dust bin. This bin is compatible with Dyson V11, V15, SV14, SV15, and SV22 vacuum cleaners. It is NOT compatible with V11 Small Bin and V11 Outsize Bin models. Please verify your vacuum's model and current bin size to avoid compatibility issues.
- Compatible Models: Dyson V11, V15, SV14, SV15, SV22 (excluding V11 Small Bin and V11 Outsize Bin).
- Part Numbers: Compatible with V11 Bin Part no. 970050-01 and V15 Bin Part no. 965443-01.
- Dimensions: Diameter approximately 4.45 inches, Height approximately 7.72 inches.
Image: A visual guide illustrating the compatible dimensions (7.72 inches height) for Dyson V11 and V15 models, and explicitly showing that V11 Small Bin (5.74 inches) and V11 Outsize Bin (10.11 inches) are not compatible.
Installation
To install the new dust bin, first ensure your vacuum cleaner is powered off and disconnected from any charging source. Carefully remove the old dust bin by pressing its release mechanism. Align the new WYWY.Wide dust bin with the vacuum's attachment point and push firmly until it clicks securely into place. Ensure the bin is fully seated before operating the vacuum.
Operating the Dust Bin
The upgraded dust bin is designed for convenient and efficient waste disposal. Its widened release bin pull plate simplifies the emptying process.
Emptying the Dust Bin
- Hold the vacuum cleaner over a waste bin.
- Locate the red release lever on the dust bin.
- Press the widened red release lever firmly. The bottom flap of the bin will open, allowing debris to fall out.
- Close the bottom flap securely until it clicks into place.
Image: A close-up view of the newly upgraded dust bin featuring a wider red release lever, designed for easier grasping and effortless debris release compared to older designs.
For optimal performance, it is recommended to empty the dust bin before the debris reaches the "MAX" line indicated on the canister. Overfilling can lead to reduced suction and faster clogging of filters.
Maintenance
Regular cleaning of your dust bin and its components will ensure consistent performance and extend the lifespan of your vacuum cleaner.
Cleaning the Dust Bin
- Remove the dust bin from the vacuum cleaner.
- Empty all debris into a waste bin.
- The dust bin can be wiped clean with a damp cloth. Do not submerge the entire bin in water, especially parts with electrical contacts.
- Ensure the bin is completely dry before reattaching it to the vacuum cleaner.
Cleaning the Bin Sealing Ring
The bin sealing ring has an upgraded design with screw fixing and one-piece molding to reduce the possibility of re-damage. It is also designed for easier removal and cleaning.
Image: An exploded view showing the upgraded bin sealing ring with screw fixing and one-piece molding, designed to prevent damage and improve durability.
- Carefully remove the sealing ring from the dust bin.
- Wash the sealing ring under running water. A soft brush can be used to remove stubborn dust and debris.
- Allow the sealing ring to air dry completely for at least 24 hours before reassembling. Ensure it is fully dry to prevent mold or odors.
Image: Demonstrates the ease of removing and cleaning the upgraded sealing ring under running water, highlighting the importance of thorough cleaning to prevent dust build-up, health issues, and bad smells.
Troubleshooting
If you encounter issues with your dust bin, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Dust bin not fitting correctly. | Incorrect model compatibility. | Verify your Dyson vacuum model against the compatible models listed in the "Setup and Compatibility" section. Ensure it is not a V11 Small Bin or V11 Outsize Bin. |
| Difficulty emptying the bin. | Bin is overfilled or debris is stuck. | Ensure the bin is not filled past the MAX line. Use the widened release lever as instructed. Gently tap the bin to dislodge stubborn debris. |
| Reduced suction from vacuum. | Overfilled bin or clogged filters/sealing ring. | Empty the dust bin regularly. Clean the bin and especially the sealing ring as per the "Maintenance" section. Ensure filters are clean and dry. |
| Unpleasant odor from bin. | Dust build-up or moisture. | Thoroughly clean the dust bin and sealing ring. Ensure all components are completely dry before reassembly. |
Specifications
Detailed specifications for the WYWY.Wide Upgraded Dust Bin:
| Feature | Detail |
|---|---|
| Brand | WYWY.Wide |
| Model Compatibility | Dyson V11, V15, SV14, SV15, SV22 (Excluding V11 Small Bin and V11 Outsize Bin) |
| Part Numbers Replaced | 970050-01 (V11 Bin), 965443-01 (V15 Bin) |
| Material | Plastic |
| Color | V11 V15 Dust Bin (Clear with Red components) |
| Item Weight | 0.48 Kilograms (1.06 pounds) |
| Dimensions (Diameter x Height) | Approximately 4.45 inches x 7.72 inches |
| Upgraded Features | Widened release bin pull plate, Screw-fixed and one-piece molded sealing ring, Thickened material for durability |
Image: A comparison showing the increased thickness of the upgraded dust bin material (0.156 inches) versus other versions (0.115 inches), indicating enhanced durability.
Warranty and Support
Your satisfaction is important to us. If you encounter any problems or have questions regarding your WYWY.Wide Upgraded Dust Bin, please do not hesitate to contact our customer service team. We are committed to providing assistance and resolving any issues you may experience.
Please refer to your purchase documentation for specific warranty details and contact information.
