1. Product Overview
This manual provides instructions for the Banpresto Dragon Ball Z Match Makers Son Goku (vs Vegeta) collectible figure. This figure is part of the Bandai Spirits Match Makers series, designed to be displayed alongside its counterpart, Vegeta.
The Son Goku figure stands approximately 4.7 inches (12 cm) tall and depicts Goku in a dynamic pose, ready for battle. It is an officially licensed Bandai Spirits product.
Image 1.1: Front view of the Banpresto Dragon Ball Z Match Makers Son Goku (vs Vegeta) figure, showcasing its dynamic pose and vibrant colors.
2. Safety Information
- WARNING: CHOKING HAZARD - Small parts. Not suitable for children under 3 years of age.
- This product is intended for display and collection purposes. It is not a toy for active play.
- Keep the figure away from direct sunlight, high temperatures, and high humidity to prevent material degradation or discoloration.
3. Setup and Assembly
The Banpresto Dragon Ball Z Match Makers Son Goku (vs Vegeta) figure requires minimal assembly. The main figure body and its display stand are typically packaged separately within the box.
- Carefully remove all components from the packaging.
- Identify the main Son Goku figure and its designated display stand.
- Locate the peg(s) on the display stand and the corresponding hole(s) on the figure's feet.
- Gently align the figure's feet with the stand's pegs and press down firmly until the figure is securely attached. Do not force the connection to avoid damage.
- Place the assembled figure on a stable, flat surface for display.
No tools or additional parts are required for assembly.
Image 3.1: Diagram showing the dimensions of the Son Goku figure, indicating its height, width, and depth.
4. Operating and Display
This figure is designed for static display. Once assembled, it can be placed in various settings to enhance your collection.
- Ensure the display surface is level and stable to prevent the figure from falling.
- For optimal visual impact, consider displaying the Son Goku figure alongside the Banpresto Match Makers Vegeta figure (sold separately) to recreate their iconic battle scene.
- Avoid placing the figure in high-traffic areas where it might be accidentally knocked over.
Image 4.1: The Son Goku figure positioned with the Vegeta figure, demonstrating the intended display configuration for the Match Makers series.
Image 4.2: An alternative angle of the Son Goku and Vegeta figures displayed together, highlighting Vegeta in the foreground.
5. Maintenance and Care
Proper care will help maintain the appearance and longevity of your figure.
- Cleaning: Dust the figure regularly with a soft, dry cloth or a soft brush. For stubborn dirt, lightly dampen a cloth with water and gently wipe the affected area, then dry immediately. Avoid abrasive cleaners or solvents, as these can damage the paint or material.
- Handling: Always handle the figure by its base or main body. Avoid gripping small, delicate parts like hair, fingers, or accessories, as they may break.
- Storage: If storing the figure, keep it in its original packaging or a protective container in a cool, dry place away from direct light.
6. Troubleshooting
Most issues with collectible figures are related to display or minor damage. Here are some common concerns and solutions:
| Problem | Solution |
|---|---|
| Figure is unstable on its stand. | Ensure the figure's pegs are fully inserted into the stand's holes. Verify the display surface is flat and level. |
| Dust accumulation. | Gently clean with a soft, dry cloth or brush. Consider a display case for long-term dust protection. |
| Minor scuffs or marks. | For light marks, a very slightly damp cloth might help. Avoid rubbing vigorously. Do not attempt to repaint or use harsh chemicals. |
For significant damage or manufacturing defects, please contact the retailer or manufacturer's customer support.
7. Specifications
- Product Name: Dragon Ball Z - Son Goku (vs Vegeta) Match Makers Figure
- Brand: Banpresto (Bandai Spirits)
- Model Number: BPR88804
- Product Dimensions: Approximately 2.4 x 4.4 x 4.7 inches (Width x Depth x Height)
- Item Weight: Approximately 12.3 ounces (348 grams)
- Material: PVC, ABS
- Assembly Required: No (minimal stand attachment)
- Included Components: Son Goku figure, Display Stand
8. Warranty and Support
Information regarding specific warranty terms for this product is not provided in the available data. For warranty claims, product support, or inquiries about manufacturing defects, please refer to the official Banpresto or Bandai Spirits website, or contact the retailer from whom the product was purchased.
Ensure you retain your proof of purchase for any support requests.