SIMU Emetteur Hz Mobile 1 Canal

SIMU Hz Mobile 1-Channel Remote Control User Manual

Brand: SIMU | Model: Emetteur Hz Mobile 1 Canal

1. Introduction

This manual provides essential information for the installation, operation, and maintenance of your SIMU Hz Mobile 1-Channel Remote Control. Please read these instructions carefully before using the product to ensure proper function and safety.

2. Product Overview and Features

The SIMU Hz Mobile 1-Channel Remote Control is designed for convenient operation of blinds and roller shutters. It replaces the Simu Color+ 1-channel remote (Ref. SU2008202) and allows control of a single shutter or a group of shutters within your home.

  • Favorite Position Function: This remote allows you to save a favorite position for your blind or shutter and activate it with a single press of the "stop" button.
  • Modern Design: Its sleek and modern design integrates easily into any interior.
  • Included Accessories: Comes with a 3V CR2430 battery and user manual.

Technical Characteristics

  • Power Supply: 3V CR2430 Battery
  • Radio Range: 150 m in open field | 15m through 2 concrete walls
  • Dimensions: 80 x 80 x 10 mm
  • Radio Frequency: 433.42 MHz
  • Protection Index: IP30
  • Product Class: III
  • Compatibility: SIMU Radio Hz motors and receivers
SIMU Hz Mobile 1-Channel Remote Control with labeled buttons
Figure 1: SIMU Hz Mobile 1-Channel Remote Control. This image shows the remote control with its main buttons labeled: "Témoin d'émission" (Transmission indicator), "Montée" (Up), "Stop/Position Favorite" (Stop/Favorite Position), and "Descente" (Down). The text "*si le moteur est équipé de cette fonction" indicates that the favorite position function is available if the motor supports it.

3. Setup and Installation

Follow these steps for the proper setup and installation of your SIMU Hz Mobile 1-Channel Remote Control.

Installation diagram for SIMU Hz Mobile 1-Channel Remote Control
Figure 2: Installation Diagram for Mobile Version. This diagram illustrates the installation process for the mobile remote control.
  1. Fix the wall bracket: Secure the wall bracket to the wall using screws (screws not supplied).
  2. Place the Hz remote control: Position the Hz remote control onto its wall bracket. This is facilitated by the integrated magnet.
The diagram also points out the "bouton programmation" (programming button) and the "pile" (battery) location on the back of the remote.

Battery Installation

The remote control uses a 3V CR2430 battery. To install or replace the battery, locate the battery compartment on the back of the remote control as shown in Figure 2. Ensure correct polarity when inserting the new battery.

4. Operating Instructions

The SIMU Hz Mobile 1-Channel Remote Control features intuitive buttons for easy operation of your blinds and roller shutters.

  • Up Button (Montée): Press to raise the blind or open the shutter.
  • Down Button (Descente): Press to lower the blind or close the shutter.
  • Stop/Favorite Position Button (Stop/Position Favorite): Press to stop the movement of the blind or shutter. If your motor supports it, a long press can activate a pre-programmed favorite position.
  • Programming Button: Located on the back of the remote (see Figure 2), this button is used for pairing the remote with compatible SIMU Radio Hz motors and receivers. Refer to the motor's specific instructions for pairing procedures.

5. Maintenance

To ensure the longevity and optimal performance of your remote control, follow these maintenance guidelines:

  • Cleaning: Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Battery Replacement: Replace the 3V CR2430 battery when the transmission indicator light (Témoin d'émission) no longer illuminates or appears dim during operation.
  • Storage: Store the remote control in a dry place, away from direct sunlight and extreme temperatures.

6. Troubleshooting

If you encounter issues with your SIMU Hz Mobile 1-Channel Remote Control, refer to the following common troubleshooting steps:

  • Remote not responding:
    • Check the battery. Replace it if necessary.
    • Ensure the remote is within the operating range of the receiver (15m through 2 concrete walls, 150m in open field).
    • Verify that the motor or receiver is powered on.
  • Shutter/Blind not moving to favorite position:
    • Confirm that your motor supports the favorite position function.
    • Re-program the favorite position if it was accidentally reset or not set correctly.
  • Difficulty pairing the remote:
    • Ensure you are following the specific pairing instructions for your SIMU Radio Hz motor or receiver.
    • Make sure no other devices are interfering with the radio frequency during the pairing process.

If the problem persists after attempting these steps, please contact SIMU customer support or a qualified technician.

7. Specifications

FeatureDetail
BrandSIMU
ModelEmetteur Hz Mobile 1 Canal
Power Supply3V CR2430 Battery (included)
Radio Range (Open Field)150 meters
Radio Range (Through Walls)15 meters (through 2 concrete walls)
Dimensions80 x 80 x 10 mm
Radio Frequency433.42 MHz
Protection IndexIP30
Product ClassIII
CompatibilitySIMU Radio Hz motors and receivers

8. Official Product Videos

The following video provides additional visual information about a compatible product.

360-Degree View of Somfy Product

This video provides a 360-degree view of a Somfy product, showcasing its design and features from all angles. While not directly the SIMU remote, it offers a visual representation of similar product aesthetics and functionality within the Somfy ecosystem, demonstrating the quality and design of related products.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official SIMU website or contact your local dealer. Keep your purchase receipt as proof of purchase for warranty claims.

Availability of spare parts: Information unavailable on spare parts.

Software updates guaranteed until: Information not available.

© 2026 SIMU. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.