Introduction
Thank you for choosing the SONGMICS 8-Drawer Fabric Dresser. This manual provides essential information for the safe assembly, operation, and maintenance of your new storage unit. Please read these instructions carefully before beginning assembly and retain them for future reference.
Safety Information
- Anti-Tip Kit: For your safety, an anti-tip kit is included. It is crucial to securely attach the dresser to a wall using this kit to prevent accidental tipping, especially in households with children or pets.
- Weight Capacity: Do not exceed the maximum load capacity of 30 kg (66 lbs) for the entire unit. Distribute weight evenly across drawers and the top surface.
- Assembly: Ensure all parts are correctly assembled and fasteners are tightened before use. Periodically check all connections for tightness.
- Placement: Place the dresser on a flat, stable, and level surface.
- Pinch Points: The design includes rounded corners to help prevent hand pinching. Exercise caution when opening and closing drawers.
Package Contents
Before assembly, verify that all components are present and undamaged. If any parts are missing or defective, please contact customer support.
- Metal frame components
- 8 fabric drawers
- Wooden top board
- Adjustable feet
- Anti-tip kit
- Assembly hardware (screws, wrench, etc.)
- Instruction manual
Assembly Instructions
Assembly is required for this product. Please follow the steps below carefully. It is recommended to assemble the unit on a soft, clean surface to prevent scratches.
- Unpack Components: Carefully remove all parts from the packaging and lay them out. Identify each component using the provided parts list (if applicable).
- Assemble Frame: Connect the metal frame components according to the diagrams. Ensure all screws are finger-tightened initially.
- Attach Adjustable Feet: Screw the adjustable feet into the bottom of the frame. These can be adjusted later to level the dresser.
- Install X-Bar Support: Secure the X-bar support to the back of the metal frame. This enhances stability.
- Place Top Board: Position the wooden top board onto the assembled metal frame. Secure it with the provided hardware.
- Insert Drawers: Unfold each fabric drawer and insert the bottom panel. Place the assembled drawers into the frame slots.
- Final Tightening: Once the entire unit is assembled, go back and securely tighten all screws with the provided tool. Do not overtighten.
- Install Anti-Tip Kit: Follow the specific instructions provided with the anti-tip kit to securely fasten the dresser to a wall stud. This step is critical for safety.
Operating Instructions
- Drawer Use: The 8 fabric drawers are designed for easy pulling and offer ample space for various items such as clothing, bedding, or household essentials.
- Weight Distribution: Distribute items evenly within each drawer to maintain balance and prevent strain on the fabric. Avoid placing excessively heavy items in a single drawer.
- Top Surface: The wooden top surface can be used for decorative items, lamps, or frequently accessed essentials. Do not place items heavier than the recommended top load capacity.
Maintenance
- Cleaning: Wipe the metal frame and wooden top with a dry cloth. For the fabric drawers, spot clean with a damp cloth and mild detergent if necessary, then air dry completely. Do not use harsh chemicals or abrasive cleaners.
- Inspection: Periodically inspect the dresser for any loose screws or damaged parts. Tighten any loose fasteners immediately.
- Avoid Moisture: Keep the dresser away from excessive moisture or direct sunlight to prevent damage to the materials.
Troubleshooting
- Dresser is Wobbly: Ensure the dresser is on a level surface. Adjust the leveling feet at the bottom of the frame until the unit is stable. Check that all assembly screws are tightened.
- Drawers Don't Slide Smoothly: Ensure the fabric drawers are fully unfolded and the bottom panels are correctly inserted. Check for any obstructions in the drawer slots.
- Unpleasant Odor: New fabric items may have a slight odor. Allow the drawers to air out in a well-ventilated area for a few days before use.
Specifications
| Attribute | Detail |
|---|---|
| Brand | SONGMICS |
| Model Number | LTS024W57 |
| Color | Cream White + Oak |
| Product Dimensions (L x W x H) | 30 x 80 x 81.5 cm (11.8 x 31.5 x 32.1 inches) |
| Item Weight | 11.5 Kilograms (25.3 lbs) |
| Material | Steel frame, Fabric drawers, Oak wood top |
| Number of Drawers | 8 |
| Max. Load Capacity (Total) | 30 kg (66 lbs) |
| Assembly Required | Yes |
| Care Instructions | Wipe with a dry cloth |
Warranty and Support
SONGMICS products are designed for quality and durability. For any questions, missing parts, or issues with your product, please contact SONGMICS customer support through your retailer or the official brand website. Please have your model number (LTS024W57) and purchase information ready.
Information regarding specific warranty periods or spare parts availability is not provided in the product details. Please refer to your purchase documentation or contact customer service for further details.
