BOVZA Twin Over Twin House Bunk Beds Instruction Manual

Welcome

Thank you for choosing the BOVZA Twin Over Twin House Bunk Beds. This manual provides essential information for safe assembly, operation, and maintenance of your new bunk bed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Important Safety Instructions

• Always follow assembly instructions precisely.
• Ensure all connections are securely tightened before use.
• Regularly check and tighten all bolts and fasteners.
• The top bunk is not suitable for children under 6 years of age.
• Use only mattresses that meet the specified dimensions and thickness (6 inches or less).
• Do not allow horseplay on or under the bed.
• Always use the ladder for access to the top bunk.
• Ensure high guard rails are properly installed and maintained to prevent falls.
• Maximum weight capacity for each bed: 200 lbs.

Package Contents

Your BOVZA Twin Over Twin House Bunk Beds will arrive in two packages. Please verify all parts are present and undamaged before assembly. Refer to the included hardware list and installation manual for detailed component identification.

• Bed frames (pine wood, plywood, PB)
• Slats (14 pcs for top bed)
• Ladder
• Roof panels
• Window door panels
• Window box components
• Hardware kit (screws, bolts, etc.)
• Assembly manual

Assembly Instructions

Assembly requires two people. Follow the step-by-step instructions provided in the separate installation manual.

1. Unpack and Identify Parts: Carefully unpack all components and lay them out. Identify each part using the provided hardware list.
2. Assemble Base Frames: Begin by assembling the base frames for both the top and bottom bunks according to the manual's diagrams.
3. Attach Support Slats: Securely attach the 14 slats to the top bed frame. The floor bed does not require slats.
4. Construct House Structure: Assemble the roof, window door, and window box components. Note: Window boxes and door are optional and can be omitted if desired.
5. Install Ladder: Securely attach the ladder to the bunk bed frame. Ensure it is stable and safe for climbing.
6. Final Tightening: Once all components are assembled, re-check and securely tighten all bolts and fasteners. Do not overtighten.

Figure 1: Fully assembled BOVZA Twin Over Twin House Bunk Bed.

Figure 2: Angled view showcasing the house-style roof and frame.

Figure 3: Detail of the decorative window box.

Figure 4: Side panel with closed window and window box.

Figure 5: Open window detail.

Figure 6: Overhead view of the bunk bed.

Usage Guidelines

• Mattress Requirements: The suggested mattress thickness is 6 inches or less for both bunks. Spring boxes are not needed.
• Weight Capacity: Each bed has a weight capacity of 200 lbs. Do not exceed this limit.
• Ladder Use: Always use the provided ladder to access the top bunk. Ensure it is free from obstructions.
• Ventilation: The open roof design allows for air circulation.

Care and Maintenance

• Cleaning: Wipe with a dry cloth. Avoid harsh chemicals or abrasive cleaners.
• Fasteners: Periodically check all bolts and screws and tighten them as necessary to ensure the bed's stability and safety.
• Wood Care: Protect the wood from extreme temperature changes and direct sunlight to prevent warping or fading.

Troubleshooting

• Bed feels wobbly: Check all assembly bolts and ensure they are securely tightened. Verify that the bed is on a level surface.
• Parts missing or damaged: Contact BOVZA customer support immediately for assistance. Do not attempt to use the bed with missing or damaged parts.
• Difficulty with assembly: Review the installation manual carefully. Ensure all parts are correctly oriented. If issues persist, contact customer support.

Product Specifications

Warranty and Customer Support

For warranty information or assistance with your BOVZA Twin Over Twin House Bunk Beds, please refer to the documentation included in your package or contact BOVZA customer support directly.