1. Introduction
Thank you for purchasing the TAKARA TOMY Transformers Legacy TL-53 Brasion figure. This instruction manual provides detailed guidance on the assembly, transformation, and proper use of your new collectible. Brasion is a powerful Transformer capable of converting between a formidable robot mode and an alien tank mode, equipped with various weapons for dynamic play and display.
2. Components Included
Carefully unbox your Transformers Legacy TL-53 Brasion and ensure all components listed below are present:
- Brasion Main Body (1)
- Turret Weapons (2)
- Sword Weapon (1)
- Weapon Attachment Parts (1)
- Instruction Manual (1)
3. Setup and Initial Inspection
Before beginning play or transformation, perform the following steps:
- Carefully remove all components from the packaging.
- Inspect all parts for any manufacturing defects or damage. If any issues are found, please contact customer support.
- Familiarize yourself with the Brasion figure in its initial robot mode.
Figure 3.1: Brasion in Robot Mode, equipped with its sword. This is the default configuration out of the box.
4. Transformation Instructions
Brasion can transform between two distinct modes: Robot Mode and Alien Tank Mode. Follow these general steps for transformation. Specific joint movements may vary, so proceed with care and observe how parts articulate.
4.1. Robot Mode to Alien Tank Mode
- Begin with Brasion in Robot Mode.
- Detach all weapons (sword, turrets) from the figure.
- Carefully fold the robot's legs and arms to form the chassis and treads of the tank.
- Rotate and position the torso and head to integrate into the tank's main body.
- Attach the turret weapons to designated ports on the tank mode. The sword can be stored underneath or along the side of the tank.
Figure 4.1: Brasion in Robot Mode (left) and Alien Tank Mode (right), demonstrating the two forms.
Figure 4.2: Detailed view of Brasion in its Alien Tank Mode, highlighting the weapon placement.
4.2. Alien Tank Mode to Robot Mode
Reverse the steps outlined above, carefully unfolding the tank components to reform the robot's limbs and torso. Ensure all joints click securely into place for stability.
Figure 4.3: Side profile of Brasion in Alien Tank Mode, showcasing its compact form.
5. Operating Instructions
Brasion is designed for display and imaginative play. Its various weapons can be utilized in both robot and tank modes.
5.1. Weapon Attachment in Robot Mode
The included sword and turret weapons can be attached to Brasion in robot mode for enhanced combat poses.
- The sword can be held in either of Brasion's hands via the 5mm peg.
- The two turret weapons can be attached to the 5mm ports on Brasion's forearms or shoulders.
- The weapon attachment parts allow for combining the two turrets into a single, larger long-distance gun, which can then be held by Brasion.
Figure 5.1: Brasion in Robot Mode, demonstrating the attachment of individual turret weapons to its arms.
Figure 5.2: Brasion in Robot Mode, holding the 'Evolution' long-distance gun, formed by combining the two turret weapons.
5.2. Weapon Placement in Alien Tank Mode
The turret weapons are integral to the tank mode's appearance and functionality. Ensure they are securely attached to their designated ports on the tank's upper surface.
6. Maintenance
To ensure the longevity and appearance of your Transformers Legacy TL-53 Brasion, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to gently wipe away dust and dirt. Avoid abrasive cleaners or solvents, as these can damage the paint and plastic.
- Storage: Store the figure in a cool, dry place away from direct sunlight and extreme temperatures, which can cause discoloration or warping.
- Joint Care: If joints become stiff, gently work them back and forth. Do not force movement, as this can cause breakage.
7. Troubleshooting
If you encounter any issues with your Brasion figure, consider the following common solutions:
- Parts not fitting during transformation: Ensure all previous steps are correctly executed and parts are aligned. Do not apply excessive force. Refer to visual guides if available.
- Loose joints: Some joints may be designed for articulation. If a joint is excessively loose and affects stability, contact customer support.
- Missing parts: Refer to the 'Components Included' section. If a part is genuinely missing from a new package, contact the retailer or manufacturer immediately.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | TL-53 |
| Product Dimensions | 2.36 x 4.33 x 7.09 inches |
| Item Weight | 4.3 ounces |
| Recommended Age | 15 years and up |
| Manufacturer | TAKARA TOMY |
9. Safety Information
Please observe the following safety precautions:
- This product contains small parts and is not suitable for children under 3 years of age due to choking hazards.
- Recommended for ages 15 and up.
- Do not put parts in mouth.
- Avoid throwing or striking the figure against hard surfaces, as this may cause damage to the product or injury.
10. Warranty and Support
Specific warranty details are typically provided with your purchase receipt or on the manufacturer's official website. For product support, missing parts, or warranty claims, please contact TAKARA TOMY customer service or the retailer from whom you purchased the product.
