TEANDE Electric Pressure Washer User Manual

1. Product Overview

The TEANDE Electric Pressure Washer is a powerful and versatile cleaning tool designed for various outdoor tasks, including cleaning cars, motorcycles, garden furniture, driveways, and more. It features a robust motor, an adjustable nozzle for different spray patterns, and a Total Stop System (TSS) for energy efficiency and extended pump life.

Figure 1.1: TEANDE 1850PSI Electric Pressure Washer with included accessories.

Figure 1.2: Various views of the TEANDE pressure washer, showing its compact design and integrated hose reel.

2. Safety Information

Always read and understand all safety warnings and instructions before operating the pressure washer. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

• Electrical Safety: Ensure the power outlet is properly grounded. Do not operate the pressure washer in wet conditions or near standing water. Always use a GFCI (Ground Fault Circuit Interrupter) protected outlet. The unit comes with a built-in GFCI plug for added safety.
• Water Connection: Connect the pressure washer to a cold water supply only. Do not use hot water. Ensure all connections are tight to prevent leaks.
• Personal Protective Equipment: Always wear appropriate eye protection (safety glasses or goggles) and protective footwear when operating the pressure washer.
• Nozzle Safety: Never point the spray gun at people, pets, or electrical devices. The high-pressure spray can cause serious injury.
• Children and Pets: Keep children and pets away from the pressure washer during operation.
• Maintenance: Disconnect the power supply before performing any maintenance or cleaning.

Figure 2.1: The GFCI protection plug ensures electrical safety during operation.

3. Components and Parts List

Before assembly, ensure all parts listed below are present and undamaged.

Figure 3.1: Included components of the TEANDE Electric Pressure Washer.

4. Setup and Assembly

Follow these steps to assemble your TEANDE Electric Pressure Washer:

1. Connect Handle and Body: Slide the handle into the designated slots on the main unit until it clicks into place.
2. Assemble Transfer Hose on Hose Reel: Secure the transfer hose to the hose reel mechanism.
3. Install Power Cord Holder: Attach the power cord holder to the main unit as indicated in the diagram.
4. Install Water Inlet Connector: Screw the water inlet connector onto the water inlet port of the pressure washer. Ensure it is hand-tight.
5. Install Water Outlet Connector: Connect the high-pressure hose to the water outlet connector on the pressure washer.
6. Connect Spray Gun: Attach the metal lance to the spray gun, then connect the high-pressure hose to the spray gun.

Figure 4.1: Visual guide for the assembly steps.

Initial Water Connection:

• Connect a standard garden hose (not included) to the water inlet connector.
• Turn on the water supply completely.
• Squeeze the trigger on the spray gun to purge air from the system until a steady stream of water emerges. This primes the pump.

5. Operating Instructions

Starting the Pressure Washer:

1. Ensure the water supply is fully open and the pump is primed (as per Section 4).
2. Plug the GFCI power cord into a grounded electrical outlet. Press the "RESET" button on the GFCI plug if necessary.
3. Turn the main power switch on the pressure washer to the "ON" position.
4. Squeeze the spray gun trigger to begin spraying. The Total Stop System (TSS) will automatically turn off the pump when the trigger is released and turn it back on when the trigger is squeezed.

Adjusting the Nozzle:

The TEANDE pressure washer features an all-in-one adjustable nozzle, eliminating the need for multiple interchangeable nozzles. Simply rotate the nozzle collar to change the spray pattern.

• Narrow Fan Pattern (High Pressure): Rotate the nozzle for a concentrated, powerful stream, ideal for tough stains and stubborn dirt on durable surfaces like concrete or metal.
• Wide Fan Pattern (Low Pressure): Rotate for a broader, less intense spray, suitable for general cleaning of larger areas, delicate surfaces, or rinsing.
• Foam Mode: Attach the foam cannon and rotate the nozzle to the foam setting for applying detergent.

Figure 5.1: The all-in-one adjustable nozzle provides multiple spray patterns.

Figure 5.2: Examples of spray patterns for various cleaning tasks.

Using the Foam Cannon:

• Fill the foam cannon with appropriate pressure washer detergent.
• Attach the foam cannon to the spray gun.
• Rotate the adjustable nozzle to the foam setting.
• Spray the desired surface, allowing the detergent to penetrate dirt and grime.
• After applying detergent, remove the foam cannon and switch back to a water spray pattern to rinse the surface thoroughly.

Demonstration Video:

Watch this official video from TEANDE to see the pressure washer in action and learn more about its features and cleaning capabilities.

Figure 5.3: Examples of effective cleaning results on various surfaces.

6. Maintenance

After Each Use:

• Turn Off: Turn off the pressure washer and unplug it from the power outlet.
• Disconnect Water: Turn off the water supply and disconnect the garden hose.
• Relieve Pressure: Squeeze the spray gun trigger to release any remaining pressure in the system.
• Drain Water: Disconnect the high-pressure hose and drain any water from the pump, hoses, and spray gun.
• Clean Nozzle: Use the included cleaning needle to clear any debris from the nozzle opening.
• Wipe Down: Wipe the exterior of the pressure washer with a damp cloth.

Storage:

• Store the pressure washer in a dry, frost-free area. Freezing temperatures can damage the pump.
• If storing for an extended period, consider using a pump protector or non-toxic antifreeze to prevent internal damage.
• Coil the high-pressure hose neatly on the integrated hose reel and store the spray gun and lance in their designated holders.

Figure 6.1: The integrated hose reel and wheels facilitate easy storage and transport.

7. Troubleshooting

If you encounter issues with your pressure washer, refer to the table below for common problems and solutions.

If the problem persists after trying these solutions, please contact customer support.

8. Specifications

Figure 8.1: Key performance indicators of the pressure washer.

9. Warranty and Support

TEANDE provides a 2-year warranty for this pressure washer. If you encounter any problems with your product or have questions, please do not hesitate to contact TEANDE customer support.

The TEANDE team is dedicated to providing high-quality products and services in the garden and lawn category. Your satisfaction is our priority.

Figure 9.1: Warranty and customer service information.

For support, please refer to the contact information provided on the product packaging or the official TEANDE website.