Marg B2373111566

Marg AUX Audio Cable Cord User Manual

Model: B2373111566

Introduction

This manual provides instructions for the proper use and care of your Marg AUX Audio Cable Cord. This cable is designed to connect audio devices with a 3.5mm audio jack, facilitating high-quality audio transmission between compatible devices such as Doss Motion Sensor Bluetooth Portable Speakers and various Apple devices.

Product Overview

Marg AUX Audio Cable with two 3.5mm male connectors

Image: The Marg AUX Audio Cable featuring two 3.5mm male connectors, ready for connection to audio devices.

The Marg AUX Audio Cable is a male-to-male 3.5mm cable, designed for universal compatibility with devices featuring a standard 3.5mm audio input/output. Its compact design ensures portability and ease of use.

Setup

Follow these steps to connect your Marg AUX Audio Cable:

  1. Identify Audio Ports: Locate the 3.5mm audio output jack on your source device (e.g., smartphone, tablet, MP3 player) and the 3.5mm audio input jack on your receiving device (e.g., Doss portable speaker, car stereo AUX input). These ports are typically marked with an "AUX" or headphone icon.
  2. Connect First End: Insert one end of the Marg AUX Audio Cable into the 3.5mm audio output jack of your source device. Ensure it is fully inserted for a secure connection.
  3. Connect Second End: Insert the other end of the Marg AUX Audio Cable into the 3.5mm audio input jack of your receiving device. Again, ensure a full and secure connection.
  4. Power On Devices: Ensure both your source device and receiving device are powered on.
Marg AUX Audio Cable coiled, showing both connectors

Image: The Marg AUX Audio Cable in a coiled state, illustrating its male-to-male 3.5mm connectors.

Operating Instructions

Once the cable is connected, follow these steps to play audio:

  1. Select AUX Input: On your receiving device (e.g., Doss speaker), select the AUX input mode. This is often done via a mode button or input selector. Refer to your receiving device's manual if you are unsure.
  2. Adjust Volume: Start with the volume on both your source device and receiving device set to a low level. Gradually increase the volume to a comfortable listening level.
  3. Play Audio: Begin playing audio from your source device. Sound should now be transmitted through the Marg AUX Audio Cable to your receiving device.

Maintenance

To ensure the longevity and optimal performance of your Marg AUX Audio Cable, follow these maintenance guidelines:

  • Storage: When not in use, store the cable in a clean, dry place, away from direct sunlight and extreme temperatures. Avoid tightly coiling or bending the cable at sharp angles to prevent internal wire damage.
  • Cleaning: Use a soft, dry cloth to wipe the cable and connectors. Do not use liquid cleaners or abrasive materials, as these can damage the cable's insulation or connector plating.
  • Handling: Always grasp the connector housing when plugging or unplugging the cable, rather than pulling on the cable itself. This prevents strain on the connection points.
  • Avoid Damage: Keep the cable away from pets and young children who might chew on it. Do not expose the cable to excessive force, crushing, or entanglement.

Troubleshooting

If you encounter issues with your Marg AUX Audio Cable, refer to the following common problems and solutions:

ProblemPossible CauseSolution
No sound
  • Loose connection
  • Incorrect input selected
  • Volume too low
  • Faulty cable or port
  • Ensure both ends of the cable are fully inserted.
  • Verify the receiving device is set to AUX input mode.
  • Increase volume on both source and receiving devices.
  • Test with another cable or device to isolate the issue.
Poor sound quality (static, distortion)
  • Loose connection
  • Interference
  • Damaged cable
  • Volume too high (clipping)
  • Check connections at both ends.
  • Move devices away from other electronics that may cause interference.
  • Inspect the cable for visible damage. Replace if damaged.
  • Reduce volume on source or receiving device.

Specifications

BrandMarg
Model NumberB2373111566
Cable TypeAUX Audio Cable
Connector Type3.5mm Male-to-Male TRS
ColorBlack
Compatible DevicesDoss Motion Sensor Bluetooth Portable Speakers (DS-1155, DS-1156, DS-1168, DS1168s, DS-1169, Asimom3, DS1189 APP, DS-1208, DS-1033), Apple iPod, iPhone, iTouch, and other devices with a standard 3.5mm audio jack.
ManufacturerMarg
Date First AvailableJuly 31, 2023

Warranty and Support

For information regarding warranty coverage or technical support for your Marg AUX Audio Cable, please refer to the retailer's return policy or contact the manufacturer directly. Specific warranty terms may vary based on your region and point of purchase.

For general inquiries or further assistance, please visit the Marg brand page on Amazon.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.