NUOSIYA USB Audio Interface (Red)

1. Introduction

Thank you for choosing the NUOSIYA USB Audio Interface. This device is designed to provide high-quality audio recording and monitoring for musicians, podcasters, vocalists, and producers. With its 24-bit/192kHz resolution and versatile input/output options, it offers a seamless experience for capturing professional-grade audio on both PC and Mac systems.

2. Safety Information

• Do not expose the unit to rain or moisture.
• Do not remove the cover. No user-serviceable parts inside. Refer servicing to qualified personnel.
• Avoid placing the unit near heat sources or in direct sunlight.
• Use only the provided power supply or a compatible 5V DC USB-C power source.
• Ensure proper ventilation to prevent overheating.
• Keep out of reach of children.

3. Package Contents

Your NUOSIYA USB Audio Interface package should include the following items:

• NUOSIYA USB Audio Interface (Red)
• USB A to C Cable
• USB 2.0 to USB A Cable
• USB A Adapter to Type-C
• 6.35mm Jack Cable
• User Manual

Image: The NUOSIYA USB Audio Interface in red, shown with its accompanying USB A to C cable, USB 2.0 to USB A cable, USB A to Type-C adapter, and 6.35mm jack cable.

4. Device Overview

4.1 Front Panel

Image: Close-up of the front panel of the NUOSIYA USB Audio Interface. It features two combo XLR/TRS inputs (INPUT1, INPUT2) with individual gain knobs, a HI-Z switch for INPUT1, 48V phantom power button, low cut filter, mix/monitor controls, DAW/loopback buttons, and a headphone output with volume control.

• GAIN (HI-Z) Knob: Adjusts input gain for INPUT1. HI-Z switch for high-impedance instruments.
• 48V Button: Activates 48V phantom power for condenser microphones.
• GAIN (Low Cut) Knob: Adjusts input gain for INPUT2. Low Cut filter for reducing low-frequency noise.
• INPUT/MIX/MON Knobs: Controls the blend between direct input signal and playback from your computer.
• DAW/OUT/LoopBack Buttons: Selects monitoring mode (DAW playback, direct output, or loopback for streaming).
• PHONE Knob: Adjusts the volume of the headphone output.
• PHONE Jack: 6.35mm stereo output for headphones.

4.2 Rear Panel

Image: Close-up of the rear panel of the NUOSIYA USB Audio Interface. It features a USB 2.0 port for computer connection, a Power Source switch (OFF/ON), a 5V DC USB-C power input, a 3.5mm output jack, a 48V switch, and two 6.35mm TRS main line-level outputs (OUTPUT L, OUTPUT R).

• USB 2.0 Port: Connects to your computer for data and power.
• Power Source Switch (OFF/ON): Turns the device power on or off.
• 5V DC USB-C Input: Provides additional power if needed, especially when using 48V phantom power or high-power devices.
• OUT 3.5mm Jack: Auxiliary output for connecting to other devices.
• OUTPUT L/R Jacks: 6.35mm TRS balanced main line-level outputs for connecting to studio monitors or mixers.

5. Setup

5.1 Initial Connection

1. Connect the USB 2.0 port on the audio interface to your computer using the provided USB cable.
2. If using a condenser microphone requiring 48V phantom power, ensure the 48V switch on the rear panel is set to ON.
3. If additional power is required (e.g., for 48V phantom power or high-impedance instruments), connect a 5V DC USB-C power adapter to the 5V DC input on the rear panel.
4. Turn the Power Source switch on the rear panel to ON.

Image: A detailed diagram illustrating various connection setups for the NUOSIYA USB Audio Interface. It shows connections for guitar, keyboard, microphone, headphones, PC/Mac, external power supply, speakers, and a mixer, highlighting the versatility of the device.

5.2 Driver Installation (Plug and Play)

The NUOSIYA USB Audio Interface is designed for plug-and-play operation. No additional drivers are required for Mac/Win 7 or above operating systems. Your computer should automatically recognize the device upon connection.

5.3 Connecting Instruments and Microphones

• Microphones: Connect your microphone to INPUT1 or INPUT2 using an XLR cable. If using a condenser microphone, activate 48V phantom power.
• Guitars/Instruments: Connect your instrument to INPUT1 or INPUT2 using a 6.35mm TRS cable. For high-impedance instruments like electric guitars, ensure the HI-Z switch for INPUT1 is engaged.

5.4 Connecting Output Devices

• Headphones: Plug your headphones into the PHONE jack on the front panel. Adjust volume using the PHONE knob.
• Studio Monitors/Speakers: Connect your studio monitors or speakers to the OUTPUT L/R jacks on the rear panel using 6.35mm TRS cables.

6. Operating Instructions

6.1 Adjusting Input Gain

Use the GAIN knobs for INPUT1 and INPUT2 to set appropriate input levels. The PK (Peak) indicators will light up if the input signal is too high, indicating potential clipping. Adjust the gain to ensure the PK light only flashes occasionally on the loudest parts of your performance.

6.2 Real-time Monitoring

The device offers zero-latency, real-time monitoring. Use the MIX/MON knob to blend between your direct input signal and the playback from your computer (DAW). This allows you to hear your performance without delay while recording.

Image: A woman wearing headphones is actively singing into a microphone, which is connected to the NUOSIYA USB Audio Interface. A laptop in front of her displays audio waveforms, demonstrating the real-time monitoring capability of the device during a recording session.

6.3 Loopback Function for Streaming/Podcasting

The LoopBack function allows you to record or stream your computer's audio output along with your live inputs (microphone, instrument). This is ideal for live streaming, podcasting, or creating content where you need to capture both your voice/instrument and background music/audio from your computer.

6.4 Software Compatibility

The audio interface is compatible with most major Digital Audio Workstations (DAWs) and recording software, including but not limited to Avid Pro Tools, Ableton Live, and Steinberg Cubase. It also works seamlessly with various podcasting and streaming applications.

7. Features

• Clear Studio Quality: Records and mixes at up to 24-bit/192kHz resolution, ensuring high fidelity and detail in your audio.
• 2 In and 2 Out: Features two combo XLR/Line inputs for microphones and instruments (guitars, keyboards) and two balanced TRS main line-level outputs for speakers, plus a stereo headphone output.
• 48V Phantom Power: Supports 48V phantom power for condenser microphones, commonly used in professional recording and podcasting.
• HI-Z Selection Switch: Dedicated switch for high-impedance instruments, optimizing signal quality for electric guitars and basses.
• Beginner-Friendly: Plug-and-play design with no driver installation required for compatible operating systems, making it easy to start creating audio immediately.

8. Compatibility

• Operating Systems: Compatible with Mac OS and Windows 7 or later. (Note: Reformatting may be required for use with MacOS depending on hardware configuration and operating system).
• Supported Software: Works with popular DAWs such as Avid Pro Tools, Ableton Live, Steinberg Cubase, and other recording/streaming software.
• Devices: Laptop, Personal Computer, Mobile Phone (compatibility may vary depending on user's hardware configuration and operating system).

9. Troubleshooting

• No Sound/Input:
  • Check all cable connections (USB, instrument, microphone, headphones, speakers).
  • Ensure the Power Source switch is ON.
  • Verify input gain knobs are adjusted correctly and PK lights are not constantly red.
  • Confirm the audio interface is selected as the input/output device in your computer's sound settings and DAW.
  • If using a condenser mic, ensure 48V phantom power is activated.
• Distorted/Clipping Audio:
  • Reduce the input GAIN knobs.
  • Ensure the PK indicators are not constantly lit red.
• Latency Issues:
  • Use the direct monitoring function (MIX/MON knob) for zero-latency monitoring.
  • Adjust buffer size settings in your DAW to a lower value (if applicable).
• Device Not Recognized:
  • Try connecting to a different USB port on your computer.
  • Restart your computer.
  • Ensure your operating system is Windows 7/Mac OS or later.

10. Specifications

11. Maintenance

• Cleaning: Use a soft, dry cloth to clean the exterior of the device. Do not use liquid cleaners or solvents.
• Storage: Store the unit in a cool, dry place away from direct sunlight and extreme temperatures.
• Handling: Handle the device with care to avoid physical damage to knobs, ports, and casing.

12. Warranty and Support

For warranty information and technical support, please refer to the contact details provided in your product packaging or visit the official NUOSIYA website. Keep your purchase receipt for warranty claims.