Product Overview
The Plasútil 6-Liter Refrigerator Water Dispenser is designed to optimize space in your refrigerator while providing convenient access to cold water. This reservoir has a 6-liter capacity, is designed not to impart taste or odor to water, and features a space-saving design equivalent to four 500 ml bottles. It includes an integrated faucet and a lid with four-sided locks for secure storage.
Key Features
- 6-liter capacity for ample water storage.
- Made from Polypropylene, ensuring no taste or odor transfer.
- BPA Free material for safe use.
- Space-optimizing design, fitting efficiently in refrigerator shelves.
- Integrated faucet for easy dispensing without removing the container.
- Lid with four-sided locks for secure sealing and hygiene.
- Suitable for temperatures ranging from -10°C to 60°C.

This image shows the complete 6-liter water dispenser, featuring a transparent body, a secure black lid with latches, and a gold-colored dispensing faucet at the bottom.
Setup and Assembly
- Unpack: Carefully remove all components from the packaging. Ensure you have the main container, the lid, and the faucet.
- Clean: Before first use, wash all parts with mild soap and water. Rinse thoroughly and allow to air dry completely.
- Install Faucet: Screw the faucet into the designated opening at the bottom of the container. Ensure it is tightened securely to prevent leaks, but do not overtighten.
- Position: Place the dispenser on a flat, stable surface inside your refrigerator.

This image illustrates the dimensions of the water dispenser: approximately 29 cm in length, 12 cm in width, and 21 cm in height. It also highlights that the product is BPA Free and freezer-safe.
Operating Instructions
- Filling: Open the lid by unlatching the four side locks. Fill the container with water or your desired beverage. Do not overfill.
- Securing the Lid: Close the lid firmly and engage all four side locks to ensure a tight seal.
- Dispensing: To dispense liquid, simply turn the faucet handle. Turn it back to the closed position to stop the flow.
- Placement: For optimal use, place the dispenser on a refrigerator shelf where the faucet can extend slightly over the edge, allowing easy access for glasses or bottles.

This image details the key operational benefits and features, including maintaining cold water, transparent design, convenient faucet use without removing from the refrigerator, space-saving form factor, secure lid for hygiene, and its temperature resilience.
Care and Maintenance
- Cleaning: Regularly clean the dispenser with warm water and mild dish soap. For thorough cleaning, disassemble the faucet and lid. Use a soft brush for hard-to-reach areas. Rinse all parts thoroughly to remove soap residue.
- Drying: Allow all components to air dry completely before reassembling to prevent mold or mildew growth.
- Storage: When not in use, store the dispenser in a clean, dry place away from direct sunlight.
Important Note: Due to the material's nature, handle with care, especially when full, to prevent cracking or damage. Avoid dropping or subjecting the dispenser to strong impacts.
Troubleshooting
Common Issues and Solutions
- Issue: Leaking from the faucet or lid.
Solution: Ensure the faucet is tightly screwed into place. Check the lid and ensure all four side locks are securely engaged. Inspect the rubber seal (if present) around the lid for proper seating and any signs of damage or wear. - Issue: Cracking or breaking of the container.
Solution: The container is made of polypropylene. While durable for its intended use, it can be susceptible to damage from impacts or excessive stress. Avoid dropping the dispenser or subjecting it to strong impacts, especially when it is full. Handle with care when moving it, particularly when it contains liquid, as the weight can stress the material.
Product Specifications
| Brand | Genérico |
| Model Number | 15419 |
| Capacity | 6 Liters |
| Dimensions (L x W x H) | 29 x 12 x 21 cm (approximately) |
| Material | Polypropylene (BPA Free) |
| Temperature Range | -10°C to 60°C |
| Color | Transparent |
| Number of Products | 1 |
| Batteries Required | No |

This image shows the water dispenser positioned on a refrigerator shelf, illustrating its compact design. It highlights that the 6-liter reservoir occupies the same space as four standard 500 ml bottles, optimizing refrigerator space.
Warranty and Support
For product support, warranty information, or to report any issues, please contact the retailer or manufacturer directly. It is recommended to keep your purchase receipt as proof of purchase for any warranty claims.





