Pure Daily Care NanoSteamer Large 3-in-1 Nano Ionic Facial Steamer

1. Introduction

The Pure Daily Care NanoSteamer is a versatile 3-in-1 device designed for facial steaming, room humidification, and towel warming. It utilizes nano-ionic steam technology, combining a conventional heating element with an ultrasonic vaporizer to produce fine steam with negatively charged ionic particles. This nano steam is designed for enhanced skin penetration. The device features a large 200ml water tank, providing up to 30 minutes of continuous operation, and includes an automatic shutoff sensor for safety when the water level is low. A 5-piece stainless steel skin kit is also provided to complement your skincare routine.

Figure 1: Pure Daily Care NanoSteamer

Figure 2: Nano-Ionic Steam vs. Regular Steam Penetration

2. Safety Information

Please read and understand all safety instructions before using the NanoSteamer.

• Avoid direct contact with hot steam to prevent burns or scalding. Maintain a safe distance from the steam spout during operation.
• Do not leave the device unattended while in operation.
• Allow the device to cool down completely before handling, cleaning, or refilling the water tank.
• Use only distilled or purified water in the water tank to prevent mineral buildup and ensure optimal performance.
• Keep the device out of reach of children and pets.
• Ensure the device is placed on a stable, flat, heat-resistant surface during use.
• Do not immerse the device in water or any other liquid.
• Unplug the device from the power outlet when not in use, during cleaning, or before moving it.

3. Package Contents

Verify that all items are present in the package:

• 1 x NanoSteamer Facial Steamer Unit
• 1 x 5-piece Stainless Steel Skin Kit with Storage Pouch
• 1 x Power Cable
• 1 x Instruction Manual

4. Product Overview

Familiarize yourself with the components of your NanoSteamer:

Figure 3: NanoSteamer Components and Skin Kit

• Steam Spout: Where the nano-ionic steam is emitted.
• Seeing Dial: Indicates the current mode (Off, Warm Towel, Facial Steamer, Humidifier).
• Inner Ionization Plate: Generates negatively charged ionic particles for enhanced steam.
• Towel Chamber: Located at the top, used for warming towels.
• Water Tank: Removable tank for filling water.
• Auto-Shutoff Sensor: Automatically turns off the device when water runs out.
• Base: Provides stability for the unit.
• Bonus Stainless Steel Skin Kit: Includes various tools for blackhead and blemish extraction.

5. Setup

Follow these steps to set up your NanoSteamer for first use:

1. Place the NanoSteamer on a firm, level, and heat-resistant surface.
2. Ensure the device is unplugged before filling the water tank.
3. Remove the water tank from the main unit.
4. Fill the water tank with distilled or purified water. Do not exceed the maximum fill line.
5. Securely replace the water tank into the main unit.
6. Plug the power cable into a standard electrical outlet.

6. Operating Instructions

The NanoSteamer offers three primary functions: facial steaming, humidification, and towel warming.

Figure 4: Using the NanoSteamer for Facial Steaming

6.1. Facial Steamer Mode

1. Ensure the water tank is filled with distilled water and properly seated.
2. Turn the seeing dial to the "Facial Steamer" setting. The indicator light will illuminate.
3. Allow approximately 1-2 minutes for the device to heat up and begin producing steam.
4. Position your face approximately 8-10 inches (20-25 cm) from the steam spout. Adjust distance for comfort and to avoid direct contact with hot steam.
5. Enjoy a steaming session for up to 30 minutes. The device will automatically shut off when the water tank is empty.
6. After use, turn the dial to "Off" and unplug the device. Allow it to cool before emptying any remaining water.

6.2. Humidifier Mode

1. Ensure the water tank is filled with distilled water and properly seated.
2. Turn the seeing dial to the "Humidifier" setting. The indicator light will illuminate.
3. The device will begin to emit a fine mist, increasing the humidity in the room.
4. The humidifier function can run for up to 30 minutes on a full tank.
5. After use, turn the dial to "Off" and unplug the device.

6.3. Towel Warming Mode

Figure 5: Towel Warming and Humidifier Modes

1. Lightly dampen a small, clean towel.
2. Open the towel chamber lid and place the damp towel inside.
3. Close the towel chamber lid securely.
4. Turn the seeing dial to the "Warm Towel" setting. The indicator light will illuminate.
5. Allow several minutes for the towel to warm. Exercise caution when removing the towel as it may be hot.
6. After use, turn the dial to "Off" and unplug the device.

6.4. Using the 5-Piece Stainless Steel Skin Kit

The included skin kit is designed to assist in blackhead and blemish extraction after a facial steaming session. Always use these tools on skin that has been softened by steam to minimize irritation and damage.

1. Ensure your skin is clean and has been steamed for at least 5-10 minutes to open pores.
2. Sanitize the stainless steel tools with rubbing alcohol before and after each use.
3. Gently apply pressure around the blemish or blackhead using the appropriate tool. Avoid excessive force to prevent skin damage.
4. Cleanse your face thoroughly after extraction and apply a toner or soothing serum.
5. Store the tools in the provided pouch.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your NanoSteamer.

• Cleaning the Water Tank: After each use, empty any remaining water from the tank. Rinse the tank with clean water and allow it to air dry.
• Descaling: To prevent mineral buildup, especially if using tap water (though distilled water is recommended), descale the unit every 1-2 months. Mix a solution of equal parts white vinegar and distilled water. Fill the water tank with this solution and run the steamer in facial steamer mode for 5-10 minutes. Empty the tank, rinse thoroughly with clean water, and run with plain distilled water for a few minutes to clear any vinegar residue.
• Exterior Cleaning: Wipe the exterior of the device with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Storage: When not in use, store the NanoSteamer in a cool, dry place, away from direct sunlight.

8. Troubleshooting

If you encounter issues with your NanoSteamer, refer to the following table for common problems and solutions.

9. Specifications

Key technical specifications for the Pure Daily Care NanoSteamer:

10. Warranty and Support

For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official Pure Daily Care website. Keep your purchase receipt as proof of purchase for any warranty claims.