Introduction
This manual provides essential information for the safe and effective use of your Insignia Power Manager 12-Outlet Surge Protector (Model: 25C25B). This device is designed to safeguard your electronic equipment from power surges, spikes, and other electrical disturbances, while also providing additional power outlets for your convenience.
Key features include a 4350-joule rating for robust protection, 12 surge-protected outlets (including 4 AC adapter-spaced and 4 always-on outlets), an 8-foot power cord with a right-angle plug for flexible placement, 58dB maximum noise filtering, an energy-saving on/off switch, and LED indicators for surge and ground status.
Image: The Insignia Power Manager 12-Outlet Surge Protector, showcasing its design and multiple outlets.
Safety Information
Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or damage to the product or connected devices.
- Indoor Use Only: This surge protector is designed for indoor use in dry locations. Do not use it outdoors or in wet environments.
- Electrical Rating: Do not exceed the electrical rating of the surge protector. Refer to the specifications section for details.
- Grounding: Ensure the wall outlet is properly grounded. The surge protector must be plugged into a three-prong grounded outlet.
- Avoid Daisy Chaining: Do not plug one surge protector into another.
- Ventilation: Do not block any ventilation openings.
- Children and Pets: Keep out of reach of children and pets.
- Inspection: Regularly inspect the surge protector and its cord for any signs of damage. Discontinue use if damaged.
Setup
- Unpack: Carefully remove the surge protector from its packaging. Retain packaging for future storage or transport.
- Placement: Place the surge protector on a stable, flat surface, away from sources of water or excessive heat. The 8-foot power cord with a right-angle plug allows for flexible placement, even in tight spaces or behind furniture.
- Connect to Wall Outlet: Plug the surge protector's power cord directly into a standard, grounded 120V AC wall outlet. Do not plug it into an extension cord or another surge protector.
- Verify Indicators: Once plugged in, check the LED indicators on the surge protector. The 'Protected' and 'Grounded' indicators should illuminate, confirming that the unit is functioning correctly and the wall outlet is properly grounded.
- Connect Devices: Plug your electronic devices into the available outlets on the surge protector. Utilize the AC adapter-spaced outlets for larger power adapters to prevent blocking adjacent outlets.
Image: (No specific image URL provided for setup, but a visual showing the right-angle plug connected to a wall outlet would be beneficial here.)
Operating
- Powering Devices: Once your devices are plugged into the surge protector and the unit is connected to a wall outlet, they will receive power.
- Energy Savings On/Off Switch: Use the master On/Off switch to control power to all connected devices simultaneously. This switch allows for simple power conservation by cutting power to all devices when not in use, preventing standby power drain.
- LED Indicators:
- Protected LED: When illuminated, this indicates that the surge protection circuitry is active and protecting your devices. If this light goes out, the surge protection has been compromised, and the unit should be replaced.
- Grounded LED: When illuminated, this indicates that the wall outlet is properly grounded. If this light is not on, the wall outlet may not be grounded, and you should consult a qualified electrician.
- Always-On Outlets: Four of the 12 outlets are designated as 'always-on' outlets. These outlets remain powered regardless of the state of the energy savings on/off switch, suitable for devices that require continuous power.
Image: (No specific image URL provided for LED indicators, but a close-up of the LED lights and the On/Off switch would be helpful here.)
Maintenance
- Cleaning: Disconnect the surge protector from the wall outlet and all connected devices before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosols.
- Surge Protection Failure: If the 'Protected' LED indicator turns off, it means the surge protection components have absorbed a significant surge and are no longer providing protection. The unit will still function as a power strip, but your devices will no longer be protected from surges. In this event, the surge protector should be replaced to ensure continued protection.
- Regular Inspection: Periodically check the power cord and the surge protector housing for any signs of damage, such as fraying, cuts, or cracks. If damage is found, discontinue use immediately and replace the unit.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to connected devices. | Surge protector not plugged in; On/Off switch is off; Wall outlet has no power; Circuit breaker tripped. | Ensure surge protector is firmly plugged into a live wall outlet. Turn the On/Off switch to the 'On' position. Check the wall outlet with another device. Reset your home's circuit breaker if necessary. |
| 'Protected' LED is off. | Surge protection components have been compromised. | The surge protector has absorbed a surge and can no longer provide protection. Replace the unit to ensure continued protection for your devices. |
| 'Grounded' LED is off. | Wall outlet is not properly grounded. | Consult a qualified electrician to inspect and correct the wiring of your wall outlet. Do not use the surge protector with an ungrounded outlet. |
| Devices are still damaged after a power event. | Extreme power surge exceeded unit's capacity; Unit was not properly grounded. | While this surge protector offers significant protection, extreme events can sometimes bypass protection. Ensure the 'Grounded' LED is always on. Consider replacing the unit after any significant power event. |
Specifications
- Model Number: 25C25B
- Brand: INSIGNIA
- Total Power Outlets: 12 (including 4 AC adapter-spaced and 4 always-on)
- Surge Protection Rating: 4350 Joules
- Noise Filtering: 58dB maximum
- Power Cord Length: 8 feet (with right-angle plug)
- Item Weight: 12.7 ounces
- Package Dimensions: 13.78 x 7.32 x 2.13 inches
- Special Feature: Energy savings on/off switch, LED indicators (Surge, Grounded)
Warranty and Support
For warranty information, technical support, or customer service regarding your Insignia Power Manager 12-Outlet Surge Protector, please refer to the official INSIGNIA website or contact their customer support directly. Keep your purchase receipt for warranty claims.
You can typically find contact information and detailed warranty terms on the manufacturer's official support pages. Please have your model number (25C25B) available when contacting support.
