1. Product Overview
The ARCORA Wall Mount Tub Filler is a meticulously crafted bathtub faucet designed to enhance your bathing experience. Featuring a matte black finish and solid brass construction, this faucet offers both durability and a modern aesthetic. Its wall-mounted design and 12-inch long spout provide ample reach and versatility for various bathtub styles.
Image: The ARCORA Wall Mount Tub Filler installed above a freestanding bathtub in a contemporary bathroom.
Key Features:
- Wall Mount Design: Saves space and offers a clean, minimalist look.
- High-Quality Material: Constructed from solid brass for corrosion resistance and high-temperature durability.
- Two Cross Handles: Provides precise control over water volume and temperature. Features a two-brass disc cartridge for drip-free performance.
- High Flow & Long Spout Reach: 8 GPM spout flow rate at 60 PSI fills tubs quickly. The 12-inch extra-long spout reach accommodates most tubs.
- Rough-in Valve Included: Concealed casting hot and cold mixer valve with US Standard NPT 1/2-inch female tapered thread for installation.
2. Safety Information
Please read all instructions carefully before installation and use. Failure to follow these instructions may result in property damage or personal injury.
- Always turn off the main water supply before beginning any installation or repair work.
- Wear appropriate personal protective equipment, such as safety glasses and gloves, during installation.
- Ensure all connections are secure to prevent leaks.
- If you are unsure about any part of the installation process, consult a qualified plumber.
3. Package Contents
Verify that all components are present and undamaged before beginning installation.
- A Pair of Gloves
- Installation Guide
- Rough-in Brass Valve
- Decorative Ring
- Handles (2)
- Wall Mount Tub Filler Spout
- Screws & Fischer Nylon Anchors & Wrench
- Teflon Tape
4. Specifications
| Feature | Specification |
|---|---|
| Brand | ARCORA |
| Model Number | AR9202500B |
| Mounting Type | Wall Mount |
| Finish Type | Matte Black |
| Material | Brass |
| Number of Handles | 2 (Cross Handles) |
| Hole Count | 3 |
| Spout Reach | 12 Inches |
| Spout Height | 12 Inches |
| Flow Rate | 8 GPM at 60 PSI |
| Included Components | Wall Mount Tub Filler, Rough-in Valve |
5. Installation Instructions
This section provides a general guide for installing your ARCORA Wall Mount Tub Filler. For detailed steps, please refer to the included installation guide and consider watching the official installation video.
Pre-Installation:
- Ensure the wall is prepared for a concealed installation, with appropriate framing and plumbing lines for hot and cold water.
- Confirm the rough-in valve can be installed to allow for the desired spout reach and handle placement.
Image: Detailed dimensions for the rough-in valve and spout placement, indicating minimum and maximum wall thickness requirements.
Installation Steps:
- Install Rough-in Valve: Secure the brass rough-in valve within the wall cavity, ensuring it is level and at the correct depth relative to the finished wall line. Connect the hot and cold water supply lines to the valve's NPT 1/2-inch female tapered threads.
- Prepare Wall Openings: Create openings in the finished wall for the spout and two handles, aligning them with the rough-in valve connections.
- Install Spout: Apply Teflon tape to the spout's threaded connection. Insert the spout into its wall opening and thread it into the central port of the rough-in valve. Ensure the spout is pointing downwards. If not, adjust the Teflon tape during installation to achieve the correct orientation.
- Install Handles: Attach the two cross handles to their respective ports on the rough-in valve. Secure them with the provided screws and decorative rings.
- Test for Leaks: Turn on the main water supply and check all connections for leaks.
Video: Official ARCORA guide on how to install the Wall Mount Tub Filler, demonstrating the steps for setting up the rough-in valve and attaching the spout and handles.
6. Operation
The ARCORA Wall Mount Tub Filler features two cross handles for easy control of water flow and temperature.
- Hot Water: Turn the left cross handle counter-clockwise to increase hot water flow.
- Cold Water: Turn the right cross handle counter-clockwise to increase cold water flow.
- Adjusting Temperature: Mix hot and cold water by adjusting both handles until the desired temperature is achieved.
- Water Flow: The faucet is designed for a high flow rate of 8 GPM at 60 PSI to quickly fill your tub.
Video: A demonstration of the ARCORA Wall Mount Tub Filler in use, showcasing its water flow and aesthetic appeal.
7. Maintenance
Proper care and maintenance will ensure the longevity and appearance of your ARCORA tub filler.
- Cleaning: Clean the matte black finish regularly with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
- Water Spots: The matte black finish is designed to resist fingerprints and water spots. For any stubborn spots, use a mild soap solution and rinse thoroughly.
- Aerator Maintenance: Periodically check and clean the aerator at the end of the spout to remove any mineral buildup that may affect water flow.
8. Troubleshooting
If you encounter any issues with your tub filler, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Flow | Clogged aerator or partially closed shut-off valve. | Clean the aerator. Ensure water supply valves are fully open. |
| Leaking from Spout/Handles | Loose connections or worn cartridge. | Check and tighten all connections. If leaking persists, the cartridge may need replacement (contact support). |
| Water Temperature Issues | Incorrect hot/cold supply connections or issues with water heater. | Verify hot and cold lines are correctly connected. Check water heater settings. |
If the problem persists after attempting these solutions, please contact ARCORA customer support.
9. Warranty and Support
The ARCORA Wall Mount Tub Filler comes with a limited warranty. For specific warranty details and to register your product, please visit the official ARCORA website or contact their customer service.
For technical assistance, replacement parts, or any other inquiries, please reach out to ARCORA customer support through their official channels.