1. Product Overview
The MakeFit Filtered Shower Head is designed to enhance your showering experience by providing purified water and multiple spray options. This handheld shower head features a multi-stage filtration system to reduce impurities, a high-pressure design for comprehensive coverage, and an easy-to-use thumb-press mode switch.
Included Components:
- Handheld Shower Head x 1
- 59-inch Stainless Steel Shower Hose x 1
- Adjustable Shower Arm Bracket x 1
- Shower Head Mineral Beads (Pre-installed) x 1
- Teflon Tape & Extra Rubber Washer x 1
Figure 1: All components included in the MakeFit Filtered Shower Head package.
2. Setup and Installation
The MakeFit Filtered Shower Head is designed for tool-free installation and can be connected to any standard G1/2" shower arm in minutes.
Installation Steps:
- Prepare the Shower Arm: Ensure your existing shower arm is clean and free from any old Teflon tape or debris. Wrap the included Teflon tape clockwise around the threads of your shower arm.
- Install the Adjustable Bracket: Screw the adjustable shower arm bracket onto the shower arm. Hand-tighten firmly.
- Connect the Hose: Attach one end of the 59-inch stainless steel hose to the adjustable bracket and the other end to the handheld shower head. Ensure rubber washers are properly seated in both connections to prevent leaks. Hand-tighten both ends.
- Place the Shower Head: Insert the handheld shower head into the adjustable bracket.
- Test for Leaks: Turn on the water supply and check all connections for any leaks. If leaks occur, tighten the connections slightly or reapply Teflon tape.
Figure 2: Visual guide for easy, tool-free installation.
3. Operating Instructions
Adjusting Spray Modes:
The MakeFit Filtered Shower Head features 6 distinct spray modes. To switch between modes, simply use the thumb-press switch located on the side of the shower head. Press the switch to cycle through the available patterns:
- Power Rain: A strong, invigorating full-body spray.
- Gentle Mist: A fine, soft spray for a relaxing experience.
- Intense Massage: Concentrated streams for muscle relief.
- Rain & Massage: A combination of rain and massage for a balanced feel.
- Mist & Massage: A blend of mist and massage for gentle invigoration.
- Rain: A classic, steady rain-like flow.
Figure 3: Easily switch between 6 spray modes with the thumb-press control.
Water Filtration:
The multi-stage filtration system, pre-installed with mineral beads, works to reduce chlorine, fluoride, heavy metals, and other impurities from your shower water. This process aims to provide cleaner, softer water for your skin and hair.
Video 1: Demonstration of chlorine reduction in filtered water compared to tap water.
Figure 4: Internal structure of the multi-stage filtration system.
4. Maintenance
Cleaning the Nozzles:
The shower head features anti-clog nozzles designed to prevent lime and hard water buildup. To clean, simply rub the silicone nozzles with your finger or a soft cloth to dislodge any mineral deposits.
Figure 5: Anti-clog nozzles for easy maintenance.
Filter Replacement:
The mineral beads in the filtration system will need to be replaced periodically, typically every 3-6 months depending on water quality and usage. Replacement filter cartridges are available from MakeFit.
- Unscrew the shower head handle from the main head.
- Carefully remove the old mineral bead cartridge.
- Insert the new mineral bead cartridge, ensuring it is seated correctly.
- Screw the shower head handle back onto the main head, ensuring a tight seal.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Pressure | Clogged nozzles or filter. | Clean the nozzles by rubbing them. Replace the filter cartridge if it's old. Ensure water supply valve is fully open. |
| Leaking Connections | Loose connections or worn washers. | Tighten all connections. Ensure rubber washers are properly seated. Replace worn washers if necessary. Reapply Teflon tape. |
| Difficulty Changing Spray Modes | Mineral buildup in the switch mechanism. | Soak the shower head in a vinegar solution to dissolve mineral buildup. Rinse thoroughly. |
| Water Quality Not Improving | Expired filter cartridge. | Replace the filter cartridge with a new one. |
6. Specifications
- Brand: MakeFit
- Model Number: S6526MB
- Style: 6 Modes
- Shape: Square
- Material: Acrylonitrile Butadiene Styrene, Stainless Steel
- Finish Type: Matte Black
- Installation Type: Wall Mounted
- Flow Rate: 1.8 GPM
- Product Dimensions: 10.62"L x 5.5"W
- Hose Length: 59 Inches
- Special Feature: Multi-stage filtration system
- UPC: 799947557042
Figure 6: WaterSense Certification for water efficiency.
7. Warranty and Support
Warranty Information:
The MakeFit Filtered Shower Head comes with a 2-year warranty from the original date of purchase. This warranty covers manufacturing defects and ensures product quality under normal use.
Customer Support:
For any questions, technical assistance, or warranty claims, please contact MakeFit customer support through our official website or the retailer where the product was purchased. Please have your model number (S6526MB) and date of purchase ready when contacting support.
Visit the MakeFit Store for more products and support resources.