Ziisee Floor Lamp User Manual

Introduction

This user manual provides essential information for the safe and efficient operation of your Ziisee Floor Lamp. Please read this manual thoroughly before assembly and use, and retain it for future reference.

Image: The Ziisee Floor Lamp, featuring a black metal body and a clear grey glass shade, with an included LED bulb visible.

Safety Information

• Ensure the power supply is disconnected before assembly, cleaning, or changing the bulb.
• Do not use the lamp in wet or damp locations. This product is designed for indoor use only.
• Do not exceed the maximum wattage specified for the bulb (60 Watts).
• Keep the lamp away from flammable materials.
• Ensure the base is stable and placed on a flat, level surface to prevent tipping.
• If the power cord is damaged, it must be replaced by the manufacturer or a qualified service agent to avoid hazards.

Package Contents

Please check that all components are present and undamaged before beginning assembly.

• Lamp Base
• Lamp Pole Sections (multiple, to be screwed together)
• Lamp Holder with wiring
• Glass Shade
• Retaining Ring for Shade
• ST58 LED Bulb (1 included)
• Foot Pedal Switch (integrated into cord)
• Assembly Instructions

Setup and Assembly

The Ziisee Floor Lamp is designed for easy assembly without the need for additional tools. Follow these steps:

Image: Visual guide showing five steps for lamp assembly: 1. Screwing pole sections together, 2. Inserting assembled tubes into the base, 3. Tightening the nut under the base, 4. Fixing the lampshade with the ring, 5. Installing the light bulb.

1. Assemble the Lamp Pole: Carefully screw all the lamp pole sections together from top to bottom until they are securely connected. Ensure the electrical wire passes freely through the sections.
2. Attach to Base: Insert the assembled lamp pole into the lamp base.
3. Secure the Base: If the lamp holder is not directly above the base, loosen the nut located underneath the base. Rotate the lamp pole until the lamp holder is in the correct position, then tighten the nut firmly to prevent the pole from shaking.
4. Install the Glass Shade: Place the clear glass shade over the lamp holder. Secure it in place by screwing the retaining ring onto the lamp holder.
5. Insert the Bulb: Screw the provided ST58 LED bulb into the E26 bulb base. Do not overtighten.
6. Position the Lamp: Place the assembled lamp on a stable, flat surface in your desired location.
7. Connect to Power: Plug the power cord into a standard 120V AC electrical outlet.

Operating Instructions

Your Ziisee Floor Lamp features a convenient foot pedal switch for easy operation.

Image: The Ziisee Floor Lamp with its dimensions (64.6 inches height, 9.4 inches base width) and a close-up of the integrated foot pedal switch on the power cord.

• Turning On/Off: Locate the foot pedal switch on the power cord. Press the switch with your foot to turn the lamp on or off.
• Bulb Replacement:
  • Ensure the lamp is unplugged from the power outlet before attempting to replace the bulb.
  • Allow the bulb to cool completely if it has been recently in use.
  • Unscrew the old bulb counter-clockwise from the E26 base.
  • Screw in a new E26 base bulb (maximum 60 Watts) clockwise until secure. The lamp is compatible with various E26 base bulbs, including ST58, A19, G25, T45, and RGB bulbs.
  • Plug the lamp back into the outlet.

Image: A visual representation of various E26 base bulb types compatible with the Ziisee Floor Lamp, including the included ST58 bulb and other compatible types like A19, G25, T45, and RGB bulbs.

Maintenance

• Cleaning: Always unplug the lamp before cleaning. Use a soft, dry cloth to wipe down the metal body and glass shade. Do not use abrasive cleaners or solvents, as they may damage the finish.
• Bulb Care: Ensure the bulb is clean and free of dust to maintain optimal light output.
• Cord Inspection: Periodically inspect the power cord for any signs of damage, fraying, or kinks. If damage is found, discontinue use and contact the manufacturer for assistance.

Troubleshooting

Specifications

Warranty and Support

For warranty information, technical support, or any inquiries regarding your Ziisee Floor Lamp, please contact the manufacturer directly. Refer to the product packaging or the official Ziisee website for contact details.

You may also find additional support and FAQs on the Ziisee Brand Store on Amazon.