Introduction
Thank you for choosing the ORSENIGO Industrial Pipe Clothing Rack with Shelves. This manual provides detailed instructions for the safe and efficient assembly, operation, and maintenance of your new garment rack. Please read this manual thoroughly before beginning assembly and retain it for future reference.
This heavy-duty, wall-mounted clothing rack is designed for organizing and displaying clothes, hats, scarves, and bags, featuring two tiers of shelves for additional storage of items like suitcases, photo frames, and plants. Its industrial pipe design integrates seamlessly into various home and retail environments.
Safety Information
Always follow basic safety precautions when assembling and using this product to reduce the risk of injury or damage.
- Ensure all parts are present and undamaged before assembly. Do not proceed with assembly if any parts are missing or damaged.
- Use appropriate tools for assembly.
- Mount the rack securely to a sturdy wall structure. Consult a professional if unsure about wall type or mounting methods.
- Do not overload the rack. The maximum load capacity is 68.04 kg (150 lbs).
- Keep children and pets away from the assembly area.
- Periodically check all connections and fasteners to ensure they remain tight.
Components List
Before assembly, verify that all components listed below are included in your package.
| Part | Description | Quantity |
|---|---|---|
| A | Long Pipe Sections | 4 |
| B | Short Pipe Sections | 4 |
| C | Elbow Connectors | 4 |
| D | T-Connectors | 2 |
| E | Wall Flanges | 6 |
| F | Wooden Shelves | 2 |
| G | Mounting Screws | 12+ |
| H | Wall Anchors | 12+ |
Note: The exact quantity of pipe sections and connectors may vary slightly based on the specific configuration of your rack. Refer to the included assembly diagram for precise counts.
Setup and Assembly
Follow these steps carefully to assemble your ORSENIGO Industrial Pipe Clothing Rack.
Tools Required:
- Pencil
- Measuring Tape
- Level
- Drill
- Screwdriver (Phillips head recommended)
- Stud Finder (recommended for drywall installation)
Assembly Steps:
- Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out and compare them with the "Components List" and the assembly diagram provided in the manual.
- Assemble Pipe Frame:
Begin by connecting the pipe sections (A, B) using the elbow (C) and T-connectors (D) to form the main frame structure. Ensure all connections are hand-tightened initially. Refer to the assembly diagram for the correct orientation of each piece.
Image Description: A fully assembled ORSENIGO Industrial Pipe Clothing Rack, showcasing the black metal pipe frame with two wooden shelves and a lower hanging rod. The rack is mounted against a light-colored wall, displaying various clothing items and decorative objects on the shelves. This image illustrates the complete structure before wall mounting.
- Attach Wall Flanges: Attach the wall flanges (E) to the designated points on the pipe frame. These flanges will be used to secure the rack to the wall.
- Position and Mark:
Hold the assembled frame against the desired wall location. Use a level to ensure it is perfectly horizontal. Mark the drilling points through the holes in the wall flanges with a pencil.
Image Description: A close-up view of the black metal pipe connections and circular wall flanges of the ORSENIGO Industrial Pipe Clothing Rack. This image highlights the robust construction and the points where the rack will be secured to the wall, showing the industrial aesthetic of the pipe fittings.
- Drill Pilot Holes: Drill pilot holes at the marked locations. The size of the drill bit will depend on your wall type and the wall anchors (H) provided. For drywall, use a stud finder to locate studs for maximum stability, or use appropriate drywall anchors.
- Install Wall Anchors (if necessary): Insert wall anchors into the pilot holes if you are not drilling into studs. Tap them gently with a hammer until flush with the wall surface.
- Mount the Rack: Align the wall flanges with the drilled holes/anchors. Secure the rack to the wall using the mounting screws (G). Tighten all screws firmly, but do not overtighten.
- Place Shelves: Once the frame is securely mounted, place the wooden shelves (F) onto the designated pipe supports. Ensure they are stable and level.
- Final Tightening: Go back and firmly tighten all pipe connections and wall flange screws.
Dimensions:
The assembled rack has the following approximate dimensions:
- Length: 160 cm (63 inches)
- Depth (from wall): 25 cm (9.84 inches)
- Height: 24.5 cm (9.65 inches)
Image Description: A diagram illustrating the key dimensions of the ORSENIGO Industrial Pipe Clothing Rack. It shows the overall length of 59 inches, the depth of 9.8 inches, and the height of 9.4 inches for the shelf section, along with a 3.93-inch extension for the hanging rod. This image provides precise measurements for planning installation space.
Operating Instructions
The ORSENIGO Industrial Pipe Clothing Rack is designed for straightforward use.
- Hanging Clothes: Use standard hangers to hang clothing items on the lower pipe rod. The rod is suitable for various garments, including shirts, dresses, and coats.
- Shelf Usage: The two wooden shelves provide space for folded clothing, storage boxes, decorative items, books, or other personal belongings.
- Side Hook: The extra pipe extension on the side can be used to hang hats, bags, or other accessories.
- Weight Distribution: Distribute weight evenly across the hanging rod and shelves to maintain stability and prevent strain on the mounting points. Do not exceed the maximum load capacity of 68.04 kg (150 lbs).
Image Description: The ORSENIGO Industrial Pipe Clothing Rack installed in a room, showcasing its functionality. Various dresses are neatly hung on the lower rod, while the two wooden shelves above hold decorative items, books, and small plants, demonstrating its use as both a clothing storage and display unit.
Image Description: The ORSENIGO Industrial Pipe Clothing Rack mounted in a bathroom, demonstrating its versatility. Several white bathrobes are hung on the main rod, and a towel is draped over the side extension. The shelves above hold various bathroom essentials and decorative items, illustrating its potential use beyond just clothing storage.
Maintenance
Regular maintenance will help prolong the life and appearance of your clothing rack.
- Cleaning: Wipe down the metal pipes and wooden shelves with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals, as they may damage the finish.
- Inspection: Periodically check all screws and pipe connections to ensure they remain tight. Re-tighten any loose fasteners to maintain stability.
- Damage: If any part of the rack becomes damaged, discontinue use and replace the damaged component immediately.
Troubleshooting
If you encounter issues with your ORSENIGO Industrial Pipe Clothing Rack, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Rack feels unstable or wobbly after mounting. | Loose mounting screws or inadequate wall anchors. Not mounted into studs. | Ensure all mounting screws are fully tightened. If not mounted into studs, consider using stronger wall anchors or relocating to a wall with studs. |
| Pipes are loose or rotating. | Pipe connections are not fully tightened. | Firmly tighten all pipe sections into their connectors (elbows, T-connectors). |
| Shelves are not level. | Rack is not mounted level, or shelves are not seated correctly. | Verify the rack is mounted level using a spirit level. Adjust shelf placement to ensure they sit flat on the pipe supports. |
| Rack appears to be sagging. | Overloaded beyond weight capacity. | Reduce the weight on the rack. Ensure total weight does not exceed 68.04 kg (150 lbs). |
Specifications
- Brand: ORSENIGO
- Model: B0CCRYBCHC
- Material: Heavy-duty steel tube (metal), MDF plank (shelves)
- Color: Black (pipes), Wood Grain (shelves)
- Style: Industrial
- Installation Method: Wall Mounted
- Product Dimensions: 160.02 x 24.99 x 24.51 cm (63 x 9.84 x 9.65 inches)
- Item Weight: 11.3 kg (24.9 lbs)
- Load Capacity: 68.04 kg (150 lbs)
- Special Features: Easy to Install, Space-Saving, Multiple Functions
Warranty and Support
For warranty information or technical support, please contact the seller or manufacturer directly through the platform where the product was purchased. Please have your purchase details and model number (B0CCRYBCHC) ready when contacting support.
Manufacturer: ORSENIGO