Vzyhik 8000

Vzyhik 8000W Solar Street Light (Model 8000) User Manual

Comprehensive Instructions for Installation, Operation, and Maintenance

1. Introduction

Thank you for choosing the Vzyhik 8000W Solar Street Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your solar street light. Please read these instructions thoroughly before use and retain them for future reference.

2. Safety Information

  • Ensure all installation steps are performed by qualified personnel or with proper supervision.
  • Do not attempt to disassemble or modify the product. This may void the warranty and pose safety risks.
  • Keep the solar panel clean to ensure optimal charging efficiency.
  • Avoid direct eye exposure to the LED light source when illuminated.
  • Ensure the mounting location is stable and can support the weight of the light fixture.
  • This product is designed for outdoor use and is waterproof (IP67 rated). However, avoid submerging it in water.

3. Package Contents

Verify that all components are present in the package:

  • Solar Street Light Unit
  • Mounting Hardware (bolts, nuts, washers)
  • Remote Control
  • Instruction Manual (this document)
Vzyhik Solar Street Light package contents

Image: The Vzyhik Solar Street Light unit, solar panel, remote control, and mounting hardware are shown, illustrating the complete package contents.

4. Product Overview and Features

The Vzyhik 8000W Solar Street Light is an advanced outdoor lighting solution designed for efficiency and durability. Key features include:

  • High Brightness: Equipped with 1152 super bright SMD 5730 LED beads, providing 480,000 lumens of 7000K daylight white light.
  • Efficient Solar Charging: Features a high-efficiency solar panel (25%+ conversion rate) and a 35,000mAh lithium battery, ensuring reliable power.
  • Dusk-to-Dawn Operation: Automatically turns on at dusk and off at dawn, providing continuous illumination without electricity bills.
  • Intelligent Motion Sensor: Integrated radar motion sensor adjusts brightness (30% to 100%) based on detected movement, conserving energy.
  • Remote Control: Allows for convenient adjustment of brightness levels, timing, and motion sensor modes from a distance.
  • Durable Construction: Made from Acrylonitrile Butadiene Styrene and Aluminum, with an IP67 waterproof rating, frost-resistant, lightning-proof, and heat-resistant design for various weather conditions.
  • Wide Angle Lighting: Provides a 240-degree wide lighting angle, covering up to 3300 sq. ft.
Dusk to Dawn Solar Charging

Image: Diagram illustrating the dusk-to-dawn operation and solar charging process, showing the solar panel and battery cells.

Motion Sensor Functionality

Image: Visual representation of the motion sensing mode, showing the light at 30% brightness with no motion and 100% brightness when motion is detected.

5. Setup and Installation

The Vzyhik Solar Street Light offers two primary installation methods: pole mount and wall mount. No wiring is required, simplifying the installation process.

5.1 Initial Charging

Before the first use, ensure the solar street light is fully charged. Place the light in direct sunlight for 6-8 hours. For optimal performance, an initial charge of 10-12 hours is recommended.

5.2 Choosing an Installation Location

Select a location that receives maximum direct sunlight throughout the day to ensure efficient charging of the solar panel. Avoid areas shaded by trees, buildings, or other obstructions.

5.3 Installation Methods

The recommended installation height is between 10 to 26 feet (3 to 8 meters) for optimal lighting coverage.

Pole Mount Installation

Image: Illustration of the solar street light mounted on a pole, demonstrating the pole mount installation method.

Wall Mount Installation

Image: Illustration of the solar street light mounted on a wall, demonstrating the wall mount installation method.

  1. Assemble the Mounting Bracket: Attach the mounting arm to the light fixture using the provided screws.
  2. Mark Drilling Points: Hold the assembled light and bracket against the desired pole or wall. Use a marker to indicate the drilling points for the mounting hardware.
  3. Drill Holes: Drill appropriate sized holes at the marked points.
  4. Secure the Light: Use the expansion bolts and nuts to securely fasten the light fixture to the pole or wall. Ensure it is tightly secured to prevent movement due to wind or other environmental factors.
Vzyhik Solar Street Light dimensions and components

Image: A detailed diagram showing the dimensions of the solar street light, solar panel, mounting arm, remote control, and included hardware.

6. Operating Instructions

The Vzyhik Solar Street Light is controlled via the included infrared remote control. Ensure the remote control has 2 AAA batteries (not included) inserted with correct polarity.

6.1 Remote Control Functions

Remote control buttons and functions

Image: A diagram of the remote control with numbered buttons and their corresponding functions.

  • ON Button: Turns on the solar street light to 100% brightness.
  • OFF Button: Turns off the solar street light. It will automatically turn on at dusk the next day if not manually turned off again.
  • Radar Motion Sensor: Activates the motion sensor mode. When people are close, the light operates at 100% brightness. When people are far away, it dims to 30% brightness. The light will not turn off completely in this mode.
  • Brightness Level Buttons: Adjusts the brightness to fixed levels of 25%, 50%, 75%, or 100%.
  • Timer Buttons (2H, 3H, 5H, 6H, 8H): Sets the light to operate at 100% brightness for a specified duration (2, 3, 5, 6, or 8 hours) without the Radar Motion Sensor function. After the set time expires, the light will revert to its operating mode before the timer was initiated.

6.2 Automatic Dusk-to-Dawn Operation

The light features a built-in photocell sensor that detects ambient light levels. It will automatically turn on when it gets dark and turn off when daylight returns, provided it is not manually turned off via the remote.

Motion sensor and intelligent energy saving

Image: A sequence showing the motion sensor's intelligent energy-saving feature: 30% brightness when no motion is detected, 100% brightness when motion is detected, and returning to 30% brightness after 20 seconds of no motion.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your solar street light.

  • Clean the Solar Panel: Periodically wipe the surface of the solar panel with a soft, damp cloth to remove dust, dirt, leaves, or snow. A clean panel ensures maximum sunlight absorption and charging efficiency.
  • Inspect Mounting: Annually check the mounting hardware to ensure it remains secure. Tighten any loose bolts or screws.
  • Battery Care: The integrated lithium battery is designed for long life. Avoid prolonged storage of the light in a completely discharged state. If storing, ensure it is charged periodically.
  • Environmental Factors: While the light is designed to be weather-resistant, extreme conditions (e.g., severe storms, prolonged heavy snow) may temporarily affect performance. Clear any snow accumulation from the solar panel promptly.

8. Troubleshooting

If you encounter issues with your Vzyhik Solar Street Light, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Light does not turn on at night.Insufficient solar charge. Solar panel is dirty or obstructed. Light is manually turned off.Ensure solar panel is clean and receives direct sunlight for 6-8 hours. Check for obstructions. Press the ON button on the remote.
Light is dim or only stays on for a short period.Insufficient solar charge due to cloudy weather or shaded panel. Battery capacity reduced.Clean the solar panel. Relocate the light to a sunnier spot. Allow several sunny days for full charge.
Remote control is not working.Remote batteries are dead or incorrectly inserted. Remote is too far from the light. Infrared sensor on light is obstructed.Replace remote batteries, ensuring correct polarity. Operate remote within 35ft. Ensure clear line of sight to the light's sensor.
Motion sensor is not detecting movement or is too sensitive.Sensor obstructed. Incorrect mode selected.Ensure the sensor area on the light is clear. Verify the Radar Motion Sensor mode is active via the remote.

9. Specifications

FeatureDetail
BrandVzyhik
Model Name8000 Watts (Model 8000)
Wattage8000 watts
Brightness480,000 Lumens
Light Source TypeLED (1152 pcs SMD 5730)
Color Temperature7000 Kelvin (Cool White)
Battery35,000mAh Lithium Ion (included)
Solar Panel Efficiency25%+
MaterialAcrylonitrile Butadiene Styrene, Aluminum
Water Resistance LevelIP67 Waterproof
Control MethodRemote Control (Infrared)
Product Dimensions29"L x 20"W x 9"H
Item Weight18.16 pounds (8.26 Kilograms)
Installation TypeWall Mount, Pole Mount
Special FeaturesWaterproof, Motion Sensor, Dusk to Dawn

10. Warranty and Support

Vzyhik provides a 1-year product warranty for this solar street light. This warranty covers defects in materials and workmanship under normal use.

For any questions, technical assistance, or warranty claims, please contact Vzyhik customer service. Refer to your purchase documentation or the Vzyhik brand store on Amazon for contact details.

We are committed to providing a satisfying purchase experience and are available to assist with any concerns regarding your solar street light.

Related Documents - 8000

PreviewVzyhik Solar Street Light User Manual - Installation and Operation Guide
Comprehensive user manual for the Vzyhik Solar Street Light, detailing installation procedures for wall and pole mounting, remote control operation, motion sensor modes, LED indicator meanings, troubleshooting tips, and warranty information.
PreviewVzyhik Solar Street Light User Manual
User manual for the Vzyhik Solar Street Light, detailing features, installation, operation, and precautions for this outdoor lighting solution.
PreviewRyobi RY909500 8,000 Watt Generator Operator's Manual
Comprehensive operator's manual for the Ryobi RY909500 8,000 Watt Generator. Contains essential safety instructions, assembly, operation, maintenance, and troubleshooting guidance for safe and effective use. Visit www.ryobitools.com for more information.
PreviewIntelbras AMT 8000 User Manual: Installation, Configuration, and Operation Guide
Comprehensive user manual for the Intelbras AMT 8000 Alarm Center, detailing its advanced features, installation procedures, programming options, and operational guidance for effective security monitoring.