BANDAI SPIRITS HG 1/144 Gundam Aerial [PERMET Score SIX] Model Kit

1. Introduction

This manual provides instructions for the assembly, operation, and maintenance of the Bandai Spirits HG 1/144 Gundam Aerial [PERMET Score SIX] Model Kit. This highly detailed model kit allows enthusiasts to recreate the iconic Mobile Suit from Mobile Suit Gundam: The Witch from Mercury, featuring specialized Permet Score SIX coloring and intricate mechanical details.

2. Setup & Assembly

The Gundam Aerial [PERMET Score SIX] is a snap-fit model kit. No glue is required for basic assembly, but hobby tools such as nippers, a hobby knife, and tweezers are recommended for a clean build. Refer to the detailed graphical instructions included in the product packaging for step-by-step assembly.

2.1. Unpacking and Part Identification

Carefully open the packaging and lay out all runners. Compare the parts with the included parts list in the instruction booklet to ensure all components are present.

Image: Overview of the model kit components and the fully assembled Gundam Aerial [PERMET Score SIX].

2.2. Basic Assembly Steps

1. Cut Parts from Runners: Use nippers to carefully cut each part from its runner. Ensure a clean cut to minimize stress marks.
2. Remove Nubs: Use a hobby knife or sandpaper to carefully remove any remaining nubs from the cut parts.
3. Assemble Sections: Follow the instruction booklet to assemble the model section by section (e.g., head, torso, arms, legs, weapons). Pay close attention to part orientation.
4. Apply Seals/Decals: The kit includes two types of double-sided seals to reproduce details on the head, back, shoulders, and thigh shell units. Apply these carefully using tweezers.

2.3. Special Features Assembly

• Permet Score SIX Shell Unit: The chest shell unit features in-mold molding to reproduce its shining blue appearance. Clear parts with metallic blue glitter are used to create the luminous effect of the Permet Score SIX.
• Leg Articulation: The legs incorporate a sliding mechanism. The knee and thigh parts are designed to follow the movement of the standing knee, and the toe parts are split to allow for natural ground contact.
• Shield and Gun Bit Deployment: The shield can be divided into 11 individual blocks, which can then be deployed as gun bits. These gun bits can be connected to various parts of the fuselage.

Image: The shield of Gundam Aerial [PERMET Score SIX] separating into 11 gun bits.

For displaying the gun bits in their deployed state, the separately sold Witch of Mercury Weapon Display Base is required. Two sets of this display base are needed to fully display all gun bits.

Image: Gundam Aerial [PERMET Score SIX] posed dynamically with a display base, showcasing deployed gun bits.

3. Features

The HG 1/144 Gundam Aerial [PERMET Score SIX] model kit offers several key features:

• Permet Score SIX Replication: The chest shell unit is reproduced with in-mold molding, and clear parts with metallic blue glitter are used to accurately represent the glowing effect of the Permet Score SIX.
• Advanced Articulation: The model features a wide range of motion, allowing for various dynamic poses. The leg structure includes a sliding mechanism for natural movement.
• Modular Shield: The shield can be separated into 11 distinct gun bits, which can be attached to the main body or displayed separately using an optional display base.
• Detailed Design: The kit incorporates mechanical modeling and blue plated parts, along with a layered structure featuring a clear exterior for a glittering appearance.

Image: A close-up view of the Gundam Aerial [PERMET Score SIX] highlighting the detailed chest and head design.

4. Maintenance

Proper care will ensure the longevity and appearance of your model kit.

• Cleaning: Dust the model regularly with a soft brush or compressed air. Avoid using harsh chemicals or abrasive materials, as these can damage the plastic and paint.
• Handling: Handle the model by its main body parts rather than delicate appendages or weapons to prevent breakage.
• Storage: Store the model away from direct sunlight, extreme temperatures, and high humidity to prevent discoloration or warping of plastic parts.
• Joint Care: If joints become loose over time, a thin layer of clear nail polish or hobby-specific joint strengthener can be applied to the male peg and allowed to dry before reassembly.

5. Troubleshooting

Here are solutions to common issues encountered during model kit assembly or display:

• Parts Not Fitting: Ensure parts are correctly oriented according to the instruction manual. If a part is too tight, gently sand down the peg or hole slightly. Do not force parts together, as this can cause breakage.
• Loose Parts: If a part feels loose, check if it is fully inserted. For persistent looseness, a small amount of hobby cement (for permanent attachment) or clear nail polish (for removable parts) can be used.
• Missing or Damaged Parts: If you discover a missing or damaged part upon opening the kit, contact the retailer or manufacturer's customer support with proof of purchase and the specific part number.
• Decal/Seal Application Issues: If seals are not adhering properly, ensure the surface is clean and dry. Use tweezers for precise placement and a cotton swab to gently press them down.

6. Specifications

7. Warranty & Support

7.1. Warranty Information

This product is a model kit and typically does not come with a manufacturer's warranty for assembled parts. Please inspect all components upon receipt. For issues related to manufacturing defects or missing parts, please contact the retailer or manufacturer within a reasonable timeframe from the purchase date.

7.2. Customer Support

For further assistance, inquiries about parts, or assembly guidance, please refer to the contact information provided in the product packaging or visit the official BANDAI SPIRITS website.