DmgicPro SI4732 ATS-25 max-Decoder Full-Band Radio Receiver User Manual

Introduction

This manual provides comprehensive instructions for the DmgicPro SI4732 ATS-25 max-Decoder Full-Band Radio Receiver. Designed for enthusiasts and professionals, this receiver offers a wide range of frequency bands and advanced decoding capabilities, including Morse code and various digital communication modes. Please read this manual thoroughly before operating the device to ensure proper use and to maximize your listening experience.

Safety Information

• Do not expose the device to extreme temperatures, direct sunlight, or high humidity.
• Avoid dropping or subjecting the device to strong impacts.
• Use only the specified charging cable and power adapter.
• Do not attempt to disassemble or modify the device. This will void the warranty and may cause damage.
• Keep the device away from water and other liquids. This product is not water resistant.
• Ensure proper ventilation when operating the device for extended periods.

Package Contents

Verify that all items are present in the package:

• DmgicPro SI4732 ATS-25 max-Decoder Full-Band Radio Receiver
• Owner's Manual
• USB Type-C Charging Cable
• Telescopic Antenna
• Stubby Antenna

Product Overview

Familiarize yourself with the main components and controls of your ATS-25 max-Decoder radio receiver.

Figure 1: Front view of the ATS-25 max-Decoder radio receiver. This image highlights the main display, tuning knob, and control buttons for functions like HAM, BAND, FREQ, MODE, BFO, STEP, BANDW, and NEXT. Both a telescopic and a stubby antenna are shown attached.

Figure 2: Display interfaces of the ATS-25 max-Decoder. This composite image illustrates the 'Setup' menu for decoder functions, the 'Modulation' screen with 8 CW modes (LSB, AM, USB, CW, DIGI, CWR, SYNC L, SYNC U), the Harduino firmware version 4.17 screen, and the main radio interface with WiFi function enabled.

Setup

1. Charging the Battery

The ATS-25 max-Decoder is equipped with a 3000mAh lithium-ion battery. Before first use, fully charge the device.

• Connect the USB Type-C charging cable to the device's Type-C port.
• Connect the other end of the cable to a compatible USB power adapter (not included) or a computer USB port.
• The charging indicator on the device will show charging status. A full charge typically takes several hours.

Figure 3: Charging the ATS-25 max-Decoder. The image shows the radio connected to a wall adapter using its Type-C charging port, indicating the charging process.

2. Attaching the Antenna

For optimal reception, attach the included telescopic or stubby antenna to the BNC connector on the device.

• Align the BNC connector on the antenna with the BNC port on the radio.
• Push the antenna connector onto the port and twist clockwise until it locks securely.
• For best performance, extend the telescopic antenna fully when in use.

3. Initial Power On

Press and hold the power button for a few seconds until the display illuminates. The device will boot up and display the main operating interface.

Operation

1. Frequency Range and Band Selection

The ATS-25 max-Decoder supports a wide range of frequencies across multiple bands:

• FM: 64-108MHz (with RDS function)
• LW: 153-500KHz
• MW: 520-1710KHz
• SW: 1730-30000KHz
• SSB: 17030KHz

Use the BAND button to cycle through available frequency bands. The display will indicate the currently selected band.

Figure 4: Frequency Range overview. This image visually represents the supported frequency ranges for FM, LW, MW, SW, and SSB, along with the antenna interface type (BNC).

2. Tuning and Frequency Entry

• Tuning Knob: Rotate the large knob on the right side of the device to adjust the frequency. The tuning step can be changed using the STEP button.
• Direct Frequency Entry: Use the numeric keypad to directly input a desired frequency. Press the FREQ button to activate frequency entry mode, input the numbers, and confirm.
• Station Search Function: The device includes a station search function. Consult the on-screen menus for this feature.
• HAM Band Fast Channel: A dedicated HAM button allows for quick access to amateur radio bands.

Figure 5: Ease of Use. This image depicts a user enjoying the radio, emphasizing its simple station search, direct frequency entry, and HAM band fast channel features.

3. Modulation Modes and Digital Decoding

The ATS-25 max-Decoder supports various modulation modes and advanced digital decoding capabilities.

• Standard Modes: LSB, AM, USB, CW. Use the MODE button to switch between these.
• New Modes: DIGI (FT4, FT8), CWR, SYNC L, SYNC U. These modes enhance the receiver's versatility for digital communication.
• Digital Communication Decoder: Built-in support for RTTY, FT8, FT4, and FELD-HELL. The latest H-RADIO firmware is preinstalled and activated.
• CW Network Signal: The device can display CW network signals in 4 formats. Use the stylus (or touch screen) to interact with the CW network display to change formats.

Figure 6: CW Network Signal Formats. This image demonstrates the radio's ability to display CW signals in various visual formats, with instructions to use a stylus to change the format.

Figure 7: 8 CW Modes. This image highlights the expanded number of CW modes available on the ATS-25 max-Decoder, including DIGI, CWR, SYNC L, and SYNC U, compared to previous versions.

4. WiFi Functionality

The ATS-25 max-Decoder features built-in WiFi connectivity, allowing for advanced functions without the need for external mobile software. Specific WiFi setup instructions are typically found within the device's 'Setup' or 'Settings' menu.

5. Audio Output

The device supports 3.5mm stereo audio output for connecting headphones or external speakers, providing clear sound and low noise.

6. Display Settings

The display can be customized for user preference:

• Orientation: The display can be rotated 90 degrees (horizontal to vertical). This setting is usually found in the system or display settings menu.
• Retro Mode: A "retro" setting is available to change the display appearance to resemble older shortwave radio consoles.

Maintenance

1. Cleaning

• Wipe the device with a soft, dry cloth.
• Do not use abrasive cleaners, solvents, or strong chemicals.
• Ensure no liquid enters the ports or openings.

2. Battery Care

• To prolong battery life, avoid fully discharging the battery frequently.
• Charge the device regularly, even if not in frequent use.
• Store the device in a cool, dry place when not in use for extended periods.

3. Storage

• When storing the radio, ensure it is powered off.
• Keep it in a protective case or bag to prevent scratches and damage.
• Store away from direct sunlight and extreme temperatures.

Figure 8: Portable Design. The image shows the compact size of the radio, making it easy to carry in a backpack for on-the-go use.

Troubleshooting

Specifications

Warranty and Support

DmgicPro products are manufactured to high quality standards. For warranty information and technical support, please refer to the contact details provided on the product packaging or the official DmgicPro website. Keep your purchase receipt as proof of purchase for warranty claims.

For further assistance, please visit the manufacturer's support page or contact their customer service directly.