UorMe CWD-V01, BYHA-002

UorMe 15W Fast Wireless Charger User Manual

Model: CWD-V01, BYHA-002

Product Overview

The UorMe 15W Fast Wireless Charging Pad is designed to provide efficient and rapid wireless charging for a wide range of compatible smartphones and devices. It comes equipped with an 18W QC3.0 wall adapter and a Type-C charging cable, ensuring you have everything needed for optimal performance.

Package Contents

1 x 15W Fast Wireless Charging Pad
1 x 18W QC3.0 USB Charging Block
1 x Type C Charging Cable

UorMe 15W Wireless Charging Set with included QC 3.0 adapter — The UorMe 15W Wireless Charging Set, illustrating the inclusion of the QC 3.0 adapter, which is essential for fast charging.

Setup Instructions

Connecting the Charger

Connect the Type-C charging cable to the USB-C input port on the wireless charging pad.
Connect the USB-A end of the cable to the included 18W QC3.0 wall charger adapter.
Plug the wall charger adapter into a standard electrical outlet.

UorMe wireless charging pad connected to its QC 3.0 power adapter — The wireless charging pad and its accompanying QC 3.0 power adapter, demonstrating the connection setup.

Important Note on Adapters

For optimal fast charging performance, it is crucial to use the included QC 3.0 adapter or another power adapter that provides 9V/2A or 12V/2A output. Using a lower-power adapter, such as a standard 5V/1A adapter, will significantly reduce charging speed and may not enable fast charging capabilities.

Diagram showing correct and incorrect power adapters for fast charging — A visual guide illustrating the difference between a suitable Quick Charge 3.0 adapter and an unsuitable 5V/1A adapter for achieving fast wireless charging.

Operating Instructions

Charging Your Device

Once the charger is connected to power, place your compatible smartphone or device centrally on the wireless charging pad.
The GREEN LED indicator on the charging pad will flash for approximately 3 seconds upon initial power connection. It will then turn off after 16 seconds as the device enters charging mode, ensuring no disturbance during sleep.
Ensure your device is properly aligned on the pad to maintain a stable and efficient charging connection.

Person placing a phone on the wireless charging pad to begin charging — An illustration of how to place a device on the wireless charging pad to initiate charging, highlighting its ease of use and portability.

Charging Modes and Compatibility

The charger intelligently adapts its output to provide the optimal charging speed for various devices:

15W Fast Charging: Compatible with Samsung Galaxy Z Flip6, Z Fold6, Z Flip5, Z Fold5, S25/S25+/S25 Ultra, S24/S24+/S24 Ultra/S24 FE, S23/S23+/S23 Ultra/S23 FE, S22/S22+/S22 Ultra, S21/S21+/S21 Ultra/S21 FE, S20/S20+/S20 Ultra; Samsung Note 20/20 Ultra; Motorola Edge 40/Edge 40 Pro/Edge 30 Pro/Edge 30 Ultra, Edge+ 5G UW(2022), Moto X40/X30 Pro/Defy 2/ThinkPhone; LG G7/G8/V30/V35/V40/V50; Google Pixel 7A/7 Pro/7/6/6 Pro.
10W Charging: Compatible with Samsung Galaxy S10/S10e/S10+/S9/S9+, S8/S8+/S7/S7 edge/S6/S6 edge; Samsung Galaxy Note 10/10+, Note 9/8/7; Google Pixel 5.
7.5W Charging: Compatible with iPhone 14/14 Pro/14 Pro Max/14 Plus, 13/13 Pro/13 Pro Max/13 Mini, 12/11/X/8 (requires latest iOS System).
5W Standard Charging: Compatible with Google Pixel 3/3 XL/4/4 XL; AirPods/AirPods Pro, Galaxy Buds/Buds+, Pixel Buds, and other Qi-enabled phones.

Diagram showing different charging modes and compatible devices — An overview of the four distinct charging modes supported by the wireless charger, detailing the maximum wattage provided for various compatible devices.

Case Compatibility

The UorMe wireless charger is designed to charge through most standard plastic, rubber, or TPU phone cases with a thickness of up to 5mm (0.2 inches). For optimal charging, it is recommended to remove any magnetic attachments, metal objects, or credit cards from your phone case, as these can interfere with the wireless charging process.

Maintenance

To ensure the longevity and optimal performance of your UorMe wireless charger, follow these maintenance guidelines:

Keep the charging pad clean and free of dust, dirt, and debris. Use a soft, dry cloth for gentle cleaning.
Avoid exposing the device to extreme temperatures, direct sunlight, high humidity, or liquids.
Do not attempt to disassemble, modify, or repair the charger yourself. Refer to qualified service personnel if issues arise.
Store the charger in a cool, dry place when not in use for extended periods.

Troubleshooting

Common Issues and Solutions

Problem	Solution
Device not charging	Ensure the charging pad is properly connected to the power adapter and the wall outlet. Reposition your device centrally on the charging pad to ensure proper alignment with the charging coil. Remove any metal objects, magnetic attachments, or credit cards from your phone case. Check if your phone case is thicker than 5mm; if so, remove it for charging. Verify that your device supports wireless charging. Note: iPhone 6-7 series and Samsung A series typically do not support wireless charging.
Slow charging	Ensure you are using the included 18W QC3.0 adapter. Using a lower-power adapter (e.g., 5V/1A) will result in significantly slower charging speeds. Confirm your device supports fast wireless charging. Ensure proper alignment of the device on the charging pad.
Charger LED not lighting up	Check all power connections, from the wall outlet to the charging pad. Try plugging the charger into a different wall outlet to rule out a power source issue.

Product Specifications

Feature	Detail
Model Number	CWD-V01, BYHA-002
Input	DC 5V-2A, 9V-2A, 12V-2A
Output	5W/7.5W/10W/15W
Included Adapter	18W QC3.0 USB Charging Block
Included Cable	Type C Charging Cable
Package Dimensions	9.13 x 5.87 x 1.26 inches
Item Weight	0.176 ounces
Connectivity Technology	USB
Connector Type	USB Type C
Special Features	Lightweight Design, Short Circuit Protection, Fast Charging, Charging Indicator, Wireless Charging
Color	Black
Manufacturer	Shenzhen Chuang Wei Da Technology Co.,LTD, Shenzhen Putuo Techonology Co., Ltd
Country of Origin	China

Safety Features

The UorMe wireless charger is built with advanced safety features to protect both the device and your connected electronics:

Over-Temperature Protection: Prevents overheating during charging.
Over-Voltage Protection: Safeguards against excessive voltage input.
Over-Charge Protection: Protects your device from being overcharged.
Over-Current Protection: Manages current flow to prevent damage.
Smart IC Chip Protection: Intelligent chip for optimized and safe charging.
Short Circuit Protection: Prevents damage from short circuits.

Diagram illustrating the superior safety features of the wireless charger — An illustration highlighting the superior safety features of the UorMe wireless charger, including protections against over-temperature, over-voltage, over-charge, over-current, and smart IC chip protection.

Support and Warranty

For any questions, technical support, or assistance with your UorMe Wireless Charger, please do not hesitate to contact our dedicated customer service team. We are committed to providing prompt support and are available 24 hours to address your inquiries.

While specific warranty terms are not detailed within this manual, UorMe stands behind the quality of its products and is dedicated to customer satisfaction. Please retain your proof of purchase for any warranty-related claims.

You can find more information and contact details by visiting the official UorMe store: UorMe Store

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.