Phoenix Home Large Power Lift Recliner Chair with Massage and Heat (Model CNN0016) User Manual

Introduction

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your Phoenix Home Large Power Lift Recliner Chair with Massage and Heat. Please read this manual thoroughly before use to ensure proper function and safety.

Safety Information

Important Safety Precautions:

• Ensure the chair is properly assembled according to the instructions provided.
• Do not use the chair near water sources or in excessively damp environments.
• Keep children and pets away from the chair while it is in operation to prevent injury.
• The maximum weight capacity for this chair is 350 lbs (158 kg). Do not exceed this limit.
• Always ensure the power cord is not pinched or damaged.
• Unplug the chair from the power outlet before cleaning or performing any maintenance.

Package Contents

Your Phoenix Home Power Lift Recliner Chair is shipped in three separate boxes. Please verify all components are present before beginning assembly.

• Backrest Section
• Seat Base with Armrests
• Power Adapter and Remote Control
• Assembly Hardware and Tools
• Instruction Manual (located in one of the arm's side pockets)

Image: Overall dimensions of the Phoenix Home Power Lift Recliner Chair.

Setup and Assembly

Assembly of the Phoenix Home Power Lift Recliner Chair is designed to be straightforward. Follow these steps:

1. Unpack Components: Carefully remove all parts from the three shipping boxes. Ensure all components listed in the "Package Contents" section are present.
2. Locate Instructions: The detailed assembly instructions and hardware are typically found in a plastic bag within one of the arm's side pockets.
3. Attach Backrest: Align the backrest with the seat base and slide it into the designated slots until it clicks securely into place.
4. Connect Wiring: Connect any internal wiring as indicated in the detailed assembly guide. Ensure all connections are firm.
5. Attach Side Panels (if applicable): Some models may require attaching side panels or armrests. Follow the specific instructions for your model.
6. Connect Power: Plug the power adapter into the chair's power input, then plug the adapter into a standard wall outlet.
7. Test Functions: Before use, test all functions (lift, recline, massage, heat) using the remote control to ensure proper operation.

Image: Side view of the assembled Phoenix Home Power Lift Recliner Chair.

Operating Instructions

The Phoenix Home Power Lift Recliner Chair is operated using the included remote control.

Power Lift and Recline Functions

The remote control features buttons to adjust the chair's position:

• Lift Button: Press and hold to gently raise the chair, assisting the user to a standing position. Release the button to stop at any desired height.
• Recline Button: Press and hold to recline the backrest and raise the footrest. Release the button to stop at any desired reclining angle, from upright to a nearly flat napping position.
• The chair can be adjusted to various positions for reading, watching TV, napping, or standing assistance.

Image: Demonstrates the various adjustable positions of the recliner, including lift assist.

Massage and Heat Functions

The chair is equipped with an 8-point vibration massage system and a lumbar heating element.

• Massage Points: The 8 massage points target the upper back, lower back, thighs, and lumbar region.
• Massage Modes: Select from 5 different massage modes to customize your experience.
• Intensity Levels: Adjust between 2 vibration intensity levels.
• Lumbar Heat: Activate the lumbar heating function for soothing warmth to the lower back.
• Refer to the remote control diagram in your detailed manual for specific button functions for massage and heat.

Image: The recliner chair highlighting the 8-point massage areas and the remote control.

Convenience Features

• USB Charging Port: A USB port is integrated for charging low-power electronic devices such as smartphones or tablets. Note: This port is not designed for high-power devices.
• Cup Holders: Two hidden cup holders are available to keep beverages within easy reach.
• Side Pocket: A side pocket provides storage for the remote control, magazines, or other small items.

Image: Detail of the integrated cup holder and side storage pocket on the recliner.

Maintenance

Proper maintenance ensures the longevity and optimal performance of your recliner chair.

• Cleaning: Wipe the chair's surface clean with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
• Power Cord: Regularly inspect the power cord for any signs of damage. If damaged, discontinue use and contact customer support.
• Moving the Chair: When moving the chair, lift it rather than dragging it to prevent damage to the base and flooring.

Troubleshooting

If you encounter issues with your Phoenix Home Power Lift Recliner Chair, refer to the following common solutions:

Specifications

Warranty and Support

The Phoenix Home Power Lift Recliner Chair comes with a 1-year warranty from the date of purchase.

For warranty claims, technical assistance, or any questions regarding your product, please contact Phoenix Home customer support. Refer to your purchase documentation or the Phoenix Home official website for contact information.