1. Introduction
Congratulations on your purchase of the Fits Gordon High Precision Metal Detector Set. This device is designed for enthusiasts and beginners alike, offering advanced features for efficient and accurate treasure hunting. With its user-friendly interface and robust construction, you are well-equipped to explore and discover hidden metallic objects.
This manual provides detailed instructions on how to assemble, operate, and maintain your metal detector to ensure optimal performance and longevity.
Image: The Fits Gordon High Precision Metal Detector Set, featuring its blue and black design, adjustable shaft, control panel, and search coil. A person is visible on the right, giving a thumbs-up gesture, indicating satisfaction with the product.
2. Package Contents
Please verify that all items listed below are present in your package:
- Fits Gordon High Precision Metal Detector (main unit with control panel, shaft, and search coil)
- Headphones
- Carrying box cover
- Carrying case
- Two (2) 9V Alkaline batteries
- User Manual (this document)
3. Assembly and Setup
Follow these steps to assemble and prepare your metal detector for use:
- Attach the Search Coil: Securely attach the search coil to the lower stem using the provided bolt and knob. Ensure it is firm but allows for slight angle adjustment.
- Connect the Stems: Connect the lower stem to the middle stem, and then the middle stem to the upper stem (which contains the control unit and armrest). Ensure all connections are tight.
- Adjust Length: The detector's length is adjustable from 41 inches to 51 inches. Loosen the locking collar on the shaft, extend or retract the stem to a comfortable length, and then tighten the collar to secure it.
- Install Batteries: Locate the battery compartment on the control unit. Insert the two (2) 9V Alkaline batteries, ensuring correct polarity (+/-). Close the compartment securely.
- Connect Headphones: Plug the headphones into the designated audio jack on the control unit. This allows for private listening and clearer detection signals without outside noise interference.
- Adjust Armrest: Position the armrest for comfortable use, ensuring your forearm rests securely.
4. Operating Instructions
Familiarize yourself with the control panel and its functions before beginning your search.
4.1. Powering On/Off
- To power on, press and hold the POWER button until the display illuminates.
- To power off, press and hold the POWER button again until the display turns off.
4.2. Operating Modes
The detector features five distinct modes for metal type discrimination. Use the MODE button to cycle through these options:
- ALL METAL: Detects all types of metal.
- DISC (Discrimination): Allows you to eliminate unwanted metal types (e.g., iron trash).
- NOTCH: Enables specific rejection of certain metal categories.
- PINPOINT: Helps to precisely locate the target after detection.
- (Specific names for the 5 modes are not provided, so using general descriptions)
4.3. Depth Adjustments
The detector offers five depth adjustments and target depth indication on the digital display. Use the + and - buttons to adjust sensitivity and depth settings. Higher sensitivity generally means greater depth detection but can also lead to more false signals.
4.4. Audible Tones
The detector provides three distinct audible tones to indicate specific metal types, helping you identify targets without constantly looking at the display:
- Low Tone: Typically indicates ferrous metals (e.g., iron, steel).
- Medium Tone: Often indicates small non-ferrous metals (e.g., nickel, small gold).
- High Tone: Usually indicates larger non-ferrous metals or highly conductive targets (e.g., silver, copper, large gold).
4.5. Waterproof Search Coil
The search coil is waterproof up to 10 inches, allowing for detection in shallow water, along shorelines, or in wet conditions. The control unit and main body are NOT waterproof and should not be submerged.
5. Maintenance
Proper care and maintenance will extend the life of your metal detector:
- Cleaning: After each use, wipe down the detector with a damp cloth to remove dirt, dust, or moisture. Do not use abrasive cleaners or solvents.
- Battery Care: Remove batteries if the detector will not be used for an extended period to prevent leakage and damage.
- Storage: Store the detector in its carrying case in a cool, dry place, away from extreme temperatures and direct sunlight.
- Cable Inspection: Periodically check all cables and connections for signs of wear or damage.
6. Troubleshooting
If you encounter issues with your metal detector, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Detector does not power on. | Dead or incorrectly installed batteries. | Check battery polarity; replace with fresh 9V Alkaline batteries. |
| No detection or weak signals. | Low sensitivity setting; search coil not properly connected; target too deep. | Increase sensitivity; ensure search coil cable is securely plugged in; sweep slower and closer to the ground. |
| False signals or erratic behavior. | High electromagnetic interference (EMI); high sensitivity; mineralized ground. | Move away from power lines or other electronics; reduce sensitivity; try a different operating mode. |
| Headphones not working. | Headphones not fully plugged in; faulty headphones. | Ensure plug is fully inserted; test with another pair of headphones if available. |
7. Specifications
| Brand | Generic (Fits Gordon) |
| Model Number | 58892-Gordon |
| Color | Black and Blue |
| Material | Plastic, Metal |
| Power Source | Battery Powered (2 x 9V Alkaline, included) |
| Item Weight | 2.56 Pounds (approx. 1.16 kg) |
| Adjustable Length | 41 inches to 51 inches (approx. 104 cm to 130 cm) |
| Waterproof Coil Depth | Up to 10 inches (approx. 25 cm) |
| Display Type | Digital |
| Number of Programs | 10 (referring to internal programming, not user-selectable modes) |
| UPC | 792363588928 |
| Product Dimensions | 41 x 10 x 10 inches (assembled, minimum length) |
| Country of Origin | China |
8. Warranty and Support
For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact the seller directly. Keep your proof of purchase for any warranty claims.
For technical assistance or inquiries not covered in this manual, please reach out to the manufacturer or retailer from whom you purchased the product.
